@@ -39,6 +39,8 @@ uint64_t riscv_iommu_hpmcycle_read(RISCVIOMMUState *s)
const uint64_t ctr_prev = s->hpmcycle_prev;
const uint64_t ctr_val = s->hpmcycle_val;
+ trace_riscv_iommu_hpm_read(cycle, inhibit, ctr_prev, ctr_val);
+
if (get_field(inhibit, RISCV_IOMMU_IOCOUNTINH_CY)) {
/*
* Counter should not increment if inhibit bit is set. We can't really
@@ -61,6 +63,8 @@ static void hpm_incr_ctr(RISCVIOMMUState *s, uint32_t ctr_idx)
cntr_val = ldq_le_p(&s->regs_rw[RISCV_IOMMU_REG_IOHPMCTR_BASE + off]);
stq_le_p(&s->regs_rw[RISCV_IOMMU_REG_IOHPMCTR_BASE + off], cntr_val + 1);
+ trace_riscv_iommu_hpm_incr_ctr(cntr_val);
+
/* Handle the overflow scenario. */
if (cntr_val == UINT64_MAX) {
/*
@@ -244,6 +248,8 @@ void riscv_iommu_process_iocntinh_cy(RISCVIOMMUState *s, bool prev_cy_inh)
return;
}
+ trace_riscv_iommu_hpm_iocntinh_cy(prev_cy_inh);
+
if (!(inhibit & RISCV_IOMMU_IOCOUNTINH_CY)) {
/*
* Cycle counter is enabled. Just start the timer again and update
@@ -268,6 +274,8 @@ void riscv_iommu_process_hpmcycle_write(RISCVIOMMUState *s)
const uint64_t val = riscv_iommu_reg_get64(s, RISCV_IOMMU_REG_IOHPMCYCLES);
const uint32_t ovf = riscv_iommu_reg_get32(s, RISCV_IOMMU_REG_IOCOUNTOVF);
+ trace_riscv_iommu_hpm_cycle_write(ovf, val);
+
/*
* Clear OF bit in IOCNTOVF if it's being cleared in IOHPMCYCLES register.
*/
@@ -352,6 +360,8 @@ void riscv_iommu_process_hpmevt_write(RISCVIOMMUState *s, uint32_t evt_reg)
return;
}
+ trace_riscv_iommu_hpm_evt_write(ctr_idx, ovf, val);
+
/* Clear OF bit in IOCNTOVF if it's being cleared in IOHPMEVT register. */
if (get_field(ovf, BIT(ctr_idx + 1)) &&
!get_field(val, RISCV_IOMMU_IOHPMEVT_OF)) {
@@ -19,3 +19,8 @@ riscv_iommu_sys_irq_sent(uint32_t vector) "IRQ sent to vector %u"
riscv_iommu_sys_msi_sent(uint32_t vector, uint64_t msi_addr, uint32_t msi_data, uint32_t result) "MSI sent to vector %u msi_addr 0x%lx msi_data 0x%x result %u"
riscv_iommu_sys_reset_hold(int reset_type) "reset type %d"
riscv_iommu_pci_reset_hold(int reset_type) "reset type %d"
+riscv_iommu_hpm_read(uint64_t cycle, uint32_t inhibit, uint64_t ctr_prev, uint64_t ctr_val) "cycle 0x%lx inhibit 0x%x ctr_prev 0x%lx ctr_val 0x%lx"
+riscv_iommu_hpm_incr_ctr(uint64_t cntr_val) "cntr_val 0x%lx"
+riscv_iommu_hpm_iocntinh_cy(bool prev_cy_inh) "prev_cy_inh %d"
+riscv_iommu_hpm_cycle_write(uint32_t ovf, uint64_t val) "ovf 0x%x val 0x%lx"
+riscv_iommu_hpm_evt_write(uint32_t ctr_idx, uint32_t ovf, uint64_t val) "ctr_idx 0x%x ovf 0x%x val 0x%lx"
Add a handful of trace events to allow for an easier time debugging the HPM feature. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> --- hw/riscv/riscv-iommu-hpm.c | 10 ++++++++++ hw/riscv/trace-events | 5 +++++ 2 files changed, 15 insertions(+)