| Message ID | 20241212185341.2857-19-philmd@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | accel/tcg: Extract user APIs out of 'exec/[cpu, exec]-all.h' | expand |
On 12/12/24 10:53, Philippe Mathieu-Daudé wrote: > Move various declarations related to user emulation > from "exec/exec-all.h" to "user/cpu_loop.h". > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > --- > include/exec/exec-all.h | 55 +------------------------------------ > include/user/cpu_loop.h | 54 ++++++++++++++++++++++++++++++++++++ > accel/tcg/user-exec.c | 1 + > bsd-user/signal.c | 1 + > linux-user/signal.c | 1 + > target/arm/tcg/mte_helper.c | 1 + > 6 files changed, 59 insertions(+), 54 deletions(-) > > diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h > index b5ea607cf45..c4a6ad3af2d 100644 > --- a/include/exec/exec-all.h > +++ b/include/exec/exec-all.h > @@ -22,7 +22,6 @@ > > #include "cpu.h" > #if defined(CONFIG_USER_ONLY) > -#include "exec/abi_ptr.h" > #include "exec/cpu_ldst.h" > #endif > #include "exec/mmu-access-type.h" > @@ -518,60 +517,8 @@ static inline tb_page_addr_t get_page_addr_code(CPUArchState *env, > return get_page_addr_code_hostp(env, addr, NULL); > } > > -#if defined(CONFIG_USER_ONLY) > +#if !defined(CONFIG_USER_ONLY) > > -/** > - * adjust_signal_pc: > - * @pc: raw pc from the host signal ucontext_t. > - * @is_write: host memory operation was write, or read-modify-write. > - * > - * Alter @pc as required for unwinding. Return the type of the > - * guest memory access -- host reads may be for guest execution. > - */ > -MMUAccessType adjust_signal_pc(uintptr_t *pc, bool is_write); > - > -/** > - * handle_sigsegv_accerr_write: > - * @cpu: the cpu context > - * @old_set: the sigset_t from the signal ucontext_t > - * @host_pc: the host pc, adjusted for the signal > - * @host_addr: the host address of the fault > - * > - * Return true if the write fault has been handled, and should be re-tried. > - */ > -bool handle_sigsegv_accerr_write(CPUState *cpu, sigset_t *old_set, > - uintptr_t host_pc, abi_ptr guest_addr); > - > -/** > - * cpu_loop_exit_sigsegv: > - * @cpu: the cpu context > - * @addr: the guest address of the fault > - * @access_type: access was read/write/execute > - * @maperr: true for invalid page, false for permission fault > - * @ra: host pc for unwinding > - * > - * Use the TCGCPUOps hook to record cpu state, do guest operating system > - * specific things to raise SIGSEGV, and jump to the main cpu loop. > - */ > -G_NORETURN void cpu_loop_exit_sigsegv(CPUState *cpu, target_ulong addr, > - MMUAccessType access_type, > - bool maperr, uintptr_t ra); > - > -/** > - * cpu_loop_exit_sigbus: > - * @cpu: the cpu context > - * @addr: the guest address of the alignment fault > - * @access_type: access was read/write/execute > - * @ra: host pc for unwinding > - * > - * Use the TCGCPUOps hook to record cpu state, do guest operating system > - * specific things to raise SIGBUS, and jump to the main cpu loop. > - */ > -G_NORETURN void cpu_loop_exit_sigbus(CPUState *cpu, target_ulong addr, > - MMUAccessType access_type, > - uintptr_t ra); > - > -#else > void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length); > void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t length); > > diff --git a/include/user/cpu_loop.h b/include/user/cpu_loop.h > index b0d4704018d..2f93575e2f4 100644 > --- a/include/user/cpu_loop.h > +++ b/include/user/cpu_loop.h > @@ -20,7 +20,10 @@ > #ifndef USER_CPU_LOOP_H > #define USER_CPU_LOOP_H > > +#include "exec/abi_ptr.h" > +#include "exec/mmu-access-type.h" > #include "exec/log.h" > +#include "exec/target_long.h" > #include "special-errno.h" > > G_NORETURN void cpu_loop(CPUArchState *env); > @@ -33,4 +36,55 @@ typedef struct target_pt_regs target_pt_regs; > > void target_cpu_copy_regs(CPUArchState *env, target_pt_regs *regs); > > +/** > + * adjust_signal_pc: > + * @pc: raw pc from the host signal ucontext_t. > + * @is_write: host memory operation was write, or read-modify-write. > + * > + * Alter @pc as required for unwinding. Return the type of the > + * guest memory access -- host reads may be for guest execution. > + */ > +MMUAccessType adjust_signal_pc(uintptr_t *pc, bool is_write); > + > +/** > + * handle_sigsegv_accerr_write: > + * @cpu: the cpu context > + * @old_set: the sigset_t from the signal ucontext_t > + * @host_pc: the host pc, adjusted for the signal > + * @host_addr: the host address of the fault > + * > + * Return true if the write fault has been handled, and should be re-tried. > + */ > +bool handle_sigsegv_accerr_write(CPUState *cpu, sigset_t *old_set, > + uintptr_t host_pc, abi_ptr guest_addr); > + > +/** > + * cpu_loop_exit_sigsegv: > + * @cpu: the cpu context > + * @addr: the guest address of the fault > + * @access_type: access was read/write/execute > + * @maperr: true for invalid page, false for permission fault > + * @ra: host pc for unwinding > + * > + * Use the TCGCPUOps hook to record cpu state, do guest operating system > + * specific things to raise SIGSEGV, and jump to the main cpu loop. > + */ > +G_NORETURN void cpu_loop_exit_sigsegv(CPUState *cpu, target_ulong addr, > + MMUAccessType access_type, > + bool maperr, uintptr_t ra); > + > +/** > + * cpu_loop_exit_sigbus: > + * @cpu: the cpu context > + * @addr: the guest address of the alignment fault > + * @access_type: access was read/write/execute > + * @ra: host pc for unwinding > + * > + * Use the TCGCPUOps hook to record cpu state, do guest operating system > + * specific things to raise SIGBUS, and jump to the main cpu loop. > + */ > +G_NORETURN void cpu_loop_exit_sigbus(CPUState *cpu, target_ulong addr, > + MMUAccessType access_type, > + uintptr_t ra); > + > #endif > diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c > index 815a39503f3..0561c4f6dc7 100644 > --- a/accel/tcg/user-exec.c > +++ b/accel/tcg/user-exec.c > @@ -24,6 +24,7 @@ > #include "qemu/bitops.h" > #include "qemu/rcu.h" > #include "exec/cpu_ldst.h" > +#include "user/cpu_loop.h" > #include "qemu/main-loop.h" > #include "user/page-protection.h" > #include "exec/page-protection.h" > diff --git a/bsd-user/signal.c b/bsd-user/signal.c > index edbcd461bfa..b4e1458237a 100644 > --- a/bsd-user/signal.c > +++ b/bsd-user/signal.c > @@ -21,6 +21,7 @@ > #include "qemu/osdep.h" > #include "qemu/log.h" > #include "qemu.h" > +#include "user/cpu_loop.h" > #include "exec/page-protection.h" > #include "user/page-protection.h" > #include "user/tswap-target.h" > diff --git a/linux-user/signal.c b/linux-user/signal.c > index a191e9b26f2..087c4d270e4 100644 > --- a/linux-user/signal.c > +++ b/linux-user/signal.c > @@ -33,6 +33,7 @@ > #include "trace.h" > #include "signal-common.h" > #include "host-signal.h" > +#include "user/cpu_loop.h" > #include "user/page-protection.h" > #include "user/safe-syscall.h" > #include "tcg/tcg.h" > diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c > index ae037dc9143..846d659ff77 100644 > --- a/target/arm/tcg/mte_helper.c > +++ b/target/arm/tcg/mte_helper.c > @@ -25,6 +25,7 @@ > #include "exec/page-protection.h" > #ifdef CONFIG_USER_ONLY > #include "user/page-protection.h" > +#include "user/cpu_loop.h" > #endif > #include "exec/ram_addr.h" > #include "exec/cpu_ldst.h" Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h index b5ea607cf45..c4a6ad3af2d 100644 --- a/include/exec/exec-all.h +++ b/include/exec/exec-all.h @@ -22,7 +22,6 @@ #include "cpu.h" #if defined(CONFIG_USER_ONLY) -#include "exec/abi_ptr.h" #include "exec/cpu_ldst.h" #endif #include "exec/mmu-access-type.h" @@ -518,60 +517,8 @@ static inline tb_page_addr_t get_page_addr_code(CPUArchState *env, return get_page_addr_code_hostp(env, addr, NULL); } -#if defined(CONFIG_USER_ONLY) +#if !defined(CONFIG_USER_ONLY) -/** - * adjust_signal_pc: - * @pc: raw pc from the host signal ucontext_t. - * @is_write: host memory operation was write, or read-modify-write. - * - * Alter @pc as required for unwinding. Return the type of the - * guest memory access -- host reads may be for guest execution. - */ -MMUAccessType adjust_signal_pc(uintptr_t *pc, bool is_write); - -/** - * handle_sigsegv_accerr_write: - * @cpu: the cpu context - * @old_set: the sigset_t from the signal ucontext_t - * @host_pc: the host pc, adjusted for the signal - * @host_addr: the host address of the fault - * - * Return true if the write fault has been handled, and should be re-tried. - */ -bool handle_sigsegv_accerr_write(CPUState *cpu, sigset_t *old_set, - uintptr_t host_pc, abi_ptr guest_addr); - -/** - * cpu_loop_exit_sigsegv: - * @cpu: the cpu context - * @addr: the guest address of the fault - * @access_type: access was read/write/execute - * @maperr: true for invalid page, false for permission fault - * @ra: host pc for unwinding - * - * Use the TCGCPUOps hook to record cpu state, do guest operating system - * specific things to raise SIGSEGV, and jump to the main cpu loop. - */ -G_NORETURN void cpu_loop_exit_sigsegv(CPUState *cpu, target_ulong addr, - MMUAccessType access_type, - bool maperr, uintptr_t ra); - -/** - * cpu_loop_exit_sigbus: - * @cpu: the cpu context - * @addr: the guest address of the alignment fault - * @access_type: access was read/write/execute - * @ra: host pc for unwinding - * - * Use the TCGCPUOps hook to record cpu state, do guest operating system - * specific things to raise SIGBUS, and jump to the main cpu loop. - */ -G_NORETURN void cpu_loop_exit_sigbus(CPUState *cpu, target_ulong addr, - MMUAccessType access_type, - uintptr_t ra); - -#else void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length); void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t length); diff --git a/include/user/cpu_loop.h b/include/user/cpu_loop.h index b0d4704018d..2f93575e2f4 100644 --- a/include/user/cpu_loop.h +++ b/include/user/cpu_loop.h @@ -20,7 +20,10 @@ #ifndef USER_CPU_LOOP_H #define USER_CPU_LOOP_H +#include "exec/abi_ptr.h" +#include "exec/mmu-access-type.h" #include "exec/log.h" +#include "exec/target_long.h" #include "special-errno.h" G_NORETURN void cpu_loop(CPUArchState *env); @@ -33,4 +36,55 @@ typedef struct target_pt_regs target_pt_regs; void target_cpu_copy_regs(CPUArchState *env, target_pt_regs *regs); +/** + * adjust_signal_pc: + * @pc: raw pc from the host signal ucontext_t. + * @is_write: host memory operation was write, or read-modify-write. + * + * Alter @pc as required for unwinding. Return the type of the + * guest memory access -- host reads may be for guest execution. + */ +MMUAccessType adjust_signal_pc(uintptr_t *pc, bool is_write); + +/** + * handle_sigsegv_accerr_write: + * @cpu: the cpu context + * @old_set: the sigset_t from the signal ucontext_t + * @host_pc: the host pc, adjusted for the signal + * @host_addr: the host address of the fault + * + * Return true if the write fault has been handled, and should be re-tried. + */ +bool handle_sigsegv_accerr_write(CPUState *cpu, sigset_t *old_set, + uintptr_t host_pc, abi_ptr guest_addr); + +/** + * cpu_loop_exit_sigsegv: + * @cpu: the cpu context + * @addr: the guest address of the fault + * @access_type: access was read/write/execute + * @maperr: true for invalid page, false for permission fault + * @ra: host pc for unwinding + * + * Use the TCGCPUOps hook to record cpu state, do guest operating system + * specific things to raise SIGSEGV, and jump to the main cpu loop. + */ +G_NORETURN void cpu_loop_exit_sigsegv(CPUState *cpu, target_ulong addr, + MMUAccessType access_type, + bool maperr, uintptr_t ra); + +/** + * cpu_loop_exit_sigbus: + * @cpu: the cpu context + * @addr: the guest address of the alignment fault + * @access_type: access was read/write/execute + * @ra: host pc for unwinding + * + * Use the TCGCPUOps hook to record cpu state, do guest operating system + * specific things to raise SIGBUS, and jump to the main cpu loop. + */ +G_NORETURN void cpu_loop_exit_sigbus(CPUState *cpu, target_ulong addr, + MMUAccessType access_type, + uintptr_t ra); + #endif diff --git a/accel/tcg/user-exec.c b/accel/tcg/user-exec.c index 815a39503f3..0561c4f6dc7 100644 --- a/accel/tcg/user-exec.c +++ b/accel/tcg/user-exec.c @@ -24,6 +24,7 @@ #include "qemu/bitops.h" #include "qemu/rcu.h" #include "exec/cpu_ldst.h" +#include "user/cpu_loop.h" #include "qemu/main-loop.h" #include "user/page-protection.h" #include "exec/page-protection.h" diff --git a/bsd-user/signal.c b/bsd-user/signal.c index edbcd461bfa..b4e1458237a 100644 --- a/bsd-user/signal.c +++ b/bsd-user/signal.c @@ -21,6 +21,7 @@ #include "qemu/osdep.h" #include "qemu/log.h" #include "qemu.h" +#include "user/cpu_loop.h" #include "exec/page-protection.h" #include "user/page-protection.h" #include "user/tswap-target.h" diff --git a/linux-user/signal.c b/linux-user/signal.c index a191e9b26f2..087c4d270e4 100644 --- a/linux-user/signal.c +++ b/linux-user/signal.c @@ -33,6 +33,7 @@ #include "trace.h" #include "signal-common.h" #include "host-signal.h" +#include "user/cpu_loop.h" #include "user/page-protection.h" #include "user/safe-syscall.h" #include "tcg/tcg.h" diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index ae037dc9143..846d659ff77 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -25,6 +25,7 @@ #include "exec/page-protection.h" #ifdef CONFIG_USER_ONLY #include "user/page-protection.h" +#include "user/cpu_loop.h" #endif #include "exec/ram_addr.h" #include "exec/cpu_ldst.h"
Move various declarations related to user emulation from "exec/exec-all.h" to "user/cpu_loop.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/exec/exec-all.h | 55 +------------------------------------ include/user/cpu_loop.h | 54 ++++++++++++++++++++++++++++++++++++ accel/tcg/user-exec.c | 1 + bsd-user/signal.c | 1 + linux-user/signal.c | 1 + target/arm/tcg/mte_helper.c | 1 + 6 files changed, 59 insertions(+), 54 deletions(-)