[PULL,38/41] rust: pl011: fix break errors and definition of Data struct

Commit Message

Paolo Bonzini Dec. 19, 2024, 8:32 a.m. UTC

The Data struct is wrong, and does not show how bits 8-15 of DR
are the receive status.  Fix it, and use it to fix break
errors ("c >> 8" in the C code does not translate to
"c.to_be_bytes()[3]").

Reviewed-by: Philippe Mathieu-Daudé <[e-mail]>
Reviewed-by: Zhao Liu <[e-mail]>
Signed-off-by: Paolo Bonzini <[e-mail]>
---
 rust/hw/char/pl011/src/device.rs | 15 ++++++------
 rust/hw/char/pl011/src/lib.rs    | 41 ++++++++++++++++++++++----------
 2 files changed, 36 insertions(+), 20 deletions(-)

Patch

diff --git a/rust/hw/char/pl011/src/device.rs b/rust/hw/char/pl011/src/device.rs
index f2ee8763d8f..5e3a9c6f581 100644
--- a/rust/hw/char/pl011/src/device.rs
+++ b/rust/hw/char/pl011/src/device.rs
@@ -30,8 +30,6 @@ 
 /// Fractional Baud Rate Divider, `UARTFBRD`
 const FBRD_MASK: u32 = 0x3f;
 
-const DATA_BREAK: u32 = 1 << 10;
-
 /// QEMU sourced constant.
 pub const PL011_FIFO_DEPTH: usize = 16_usize;
 
@@ -75,7 +73,7 @@  pub struct PL011State {
     pub dmacr: u32,
     pub int_enabled: u32,
     pub int_level: u32,
-    pub read_fifo: [u32; PL011_FIFO_DEPTH],
+    pub read_fifo: [registers::Data; PL011_FIFO_DEPTH],
     pub ilpr: u32,
     pub ibrd: u32,
     pub fbrd: u32,
@@ -210,10 +208,11 @@  pub fn read(&mut self, offset: hwaddr, _size: c_uint) -> std::ops::ControlFlow<u
                     self.int_level &= !registers::INT_RX;
                 }
                 // Update error bits.
-                self.receive_status_error_clear = c.to_be_bytes()[3].into();
+                self.receive_status_error_clear.set_from_data(c);
                 self.update();
                 // Must call qemu_chr_fe_accept_input, so return Continue:
-                return std::ops::ControlFlow::Continue(c.into());
+                let c = u32::from(c);
+                return std::ops::ControlFlow::Continue(u64::from(c));
             }
             Ok(RSR) => u8::from(self.receive_status_error_clear).into(),
             Ok(FR) => u16::from(self.flags).into(),
@@ -406,7 +405,7 @@  fn loopback_mdmctrl(&mut self) {
 
     fn loopback_break(&mut self, enable: bool) {
         if enable {
-            self.loopback_tx(DATA_BREAK);
+            self.loopback_tx(registers::Data::BREAK.into());
         }
     }
 
@@ -470,7 +469,7 @@  pub fn can_receive(&self) -> bool {
 
     pub fn event(&mut self, event: QEMUChrEvent) {
         if event == bindings::QEMUChrEvent::CHR_EVENT_BREAK && !self.loopback_enabled() {
-            self.put_fifo(DATA_BREAK);
+            self.put_fifo(registers::Data::BREAK.into());
         }
     }
 
@@ -497,7 +496,7 @@  pub fn put_fifo(&mut self, value: c_uint) {
         let depth = self.fifo_depth();
         assert!(depth > 0);
         let slot = (self.read_pos + self.read_count) & (depth - 1);
-        self.read_fifo[slot] = value;
+        self.read_fifo[slot] = registers::Data::from(value);
         self.read_count += 1;
         self.flags.set_receive_fifo_empty(false);
         if self.read_count == depth {
diff --git a/rust/hw/char/pl011/src/lib.rs b/rust/hw/char/pl011/src/lib.rs
index e3eacb0e6b9..463ae60543b 100644
--- a/rust/hw/char/pl011/src/lib.rs
+++ b/rust/hw/char/pl011/src/lib.rs
@@ -139,6 +139,21 @@  pub mod registers {
     //! unused thus treated as zero when read or written.
     use bilge::prelude::*;
 
+    /// Receive Status Register / Data Register common error bits
+    ///
+    /// The `UARTRSR` register is updated only when a read occurs
+    /// from the `UARTDR` register with the same status information
+    /// that can also be obtained by reading the `UARTDR` register
+    #[bitsize(8)]
+    #[derive(Clone, Copy, Default, DebugBits, FromBits)]
+    pub struct Errors {
+        pub framing_error: bool,
+        pub parity_error: bool,
+        pub break_error: bool,
+        pub overrun_error: bool,
+        _reserved_unpredictable: u4,
+    }
+
     // TODO: FIFO Mode has different semantics
     /// Data Register, `UARTDR`
     ///
@@ -181,16 +196,18 @@  pub mod registers {
     ///
     /// # Source
     /// ARM DDI 0183G 3.3.1 Data Register, UARTDR
-    #[bitsize(16)]
-    #[derive(Clone, Copy, DebugBits, FromBits)]
+    #[bitsize(32)]
+    #[derive(Clone, Copy, Default, DebugBits, FromBits)]
     #[doc(alias = "UARTDR")]
     pub struct Data {
-        _reserved: u4,
         pub data: u8,
-        pub framing_error: bool,
-        pub parity_error: bool,
-        pub break_error: bool,
-        pub overrun_error: bool,
+        pub errors: Errors,
+        _reserved: u16,
+    }
+
+    impl Data {
+        // bilge is not very const-friendly, unfortunately
+        pub const BREAK: Self = Self { value: 1 << 10 };
     }
 
     // TODO: FIFO Mode has different semantics
@@ -220,14 +237,14 @@  pub struct Data {
     #[bitsize(8)]
     #[derive(Clone, Copy, DebugBits, FromBits)]
     pub struct ReceiveStatusErrorClear {
-        pub framing_error: bool,
-        pub parity_error: bool,
-        pub break_error: bool,
-        pub overrun_error: bool,
-        _reserved_unpredictable: u4,
+        pub errors: Errors,
     }
 
     impl ReceiveStatusErrorClear {
+        pub fn set_from_data(&mut self, data: Data) {
+            self.set_errors(data.errors());
+        }
+
         pub fn reset(&mut self) {
             // All the bits are cleared to 0 on reset.
             *self = Self::default();