@@ -1009,7 +1009,7 @@ ERST
{
.name = "migrate_set_parameter",
- .args_type = "parameter:s,value:s",
+ .args_type = "parameter:s,value:S",
.params = "parameter value",
.help = "Set the parameter for migration",
.cmd = hmp_migrate_set_parameter,
@@ -100,6 +100,13 @@ void qemu_dsa_stop(void);
*/
void qemu_dsa_cleanup(void);
+/**
+ * @brief Check if DSA is supported.
+ *
+ * @return True if DSA is supported, otherwise false.
+ */
+bool qemu_dsa_is_supported(void);
+
/**
* @brief Check if DSA is running.
*
@@ -141,6 +148,12 @@ buffer_is_zero_dsa_batch_sync(QemuDsaBatchTask *batch_task,
typedef struct QemuDsaBatchTask {} QemuDsaBatchTask;
+static inline bool qemu_dsa_is_supported(void)
+{
+ return false;
+}
+
+
static inline bool qemu_dsa_is_running(void)
{
return false;
@@ -312,7 +312,16 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
monitor_printf(mon, "%s: '%s'\n",
MigrationParameter_str(MIGRATION_PARAMETER_TLS_AUTHZ),
params->tls_authz);
-
+ if (params->has_accel_path) {
+ strList *accel_path = params->accel_path;
+ monitor_printf(mon, "%s:",
+ MigrationParameter_str(MIGRATION_PARAMETER_ACCEL_PATH));
+ while (accel_path) {
+ monitor_printf(mon, " '%s'", accel_path->value);
+ accel_path = accel_path->next;
+ }
+ monitor_printf(mon, "\n");
+ }
if (params->has_block_bitmap_mapping) {
const BitmapMigrationNodeAliasList *bmnal;
@@ -563,6 +572,15 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
p->has_x_checkpoint_delay = true;
visit_type_uint32(v, param, &p->x_checkpoint_delay, &err);
break;
+ case MIGRATION_PARAMETER_ACCEL_PATH:
+ p->has_accel_path = true;
+ char **strv = g_strsplit(valuestr ? : "", " ", -1);
+ strList **tail = &p->accel_path;
+ for (int i = 0; strv[i]; i++) {
+ QAPI_LIST_APPEND(tail, g_strdup(strv[i]));
+ }
+ g_strfreev(strv);
+ break;
case MIGRATION_PARAMETER_MULTIFD_CHANNELS:
p->has_multifd_channels = true;
visit_type_uint8(v, param, &p->multifd_channels, &err);
@@ -13,6 +13,7 @@
#include "qemu/osdep.h"
#include "qemu/error-report.h"
+#include "qemu/dsa.h"
#include "exec/target_page.h"
#include "qapi/clone-visitor.h"
#include "qapi/error.h"
@@ -809,6 +810,13 @@ const char *migrate_tls_creds(void)
return s->parameters.tls_creds;
}
+const strList *migrate_accel_path(void)
+{
+ MigrationState *s = migrate_get_current();
+
+ return s->parameters.accel_path;
+}
+
const char *migrate_tls_hostname(void)
{
MigrationState *s = migrate_get_current();
@@ -922,6 +930,8 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
params->zero_page_detection = s->parameters.zero_page_detection;
params->has_direct_io = true;
params->direct_io = s->parameters.direct_io;
+ params->has_accel_path = true;
+ params->accel_path = QAPI_CLONE(strList, s->parameters.accel_path);
return params;
}
@@ -930,6 +940,7 @@ void migrate_params_init(MigrationParameters *params)
{
params->tls_hostname = g_strdup("");
params->tls_creds = g_strdup("");
+ params->accel_path = NULL;
/* Set has_* up only for parameter checks */
params->has_throttle_trigger_threshold = true;
@@ -1142,6 +1153,14 @@ bool migrate_params_check(MigrationParameters *params, Error **errp)
return false;
}
+ if (params->has_zero_page_detection &&
+ params->zero_page_detection == ZERO_PAGE_DETECTION_DSA_ACCEL) {
+ if (!qemu_dsa_is_supported()) {
+ error_setg(errp, "DSA acceleration is not supported.");
+ return false;
+ }
+ }
+
return true;
}
@@ -1255,6 +1274,11 @@ static void migrate_params_test_apply(MigrateSetParameters *params,
if (params->has_direct_io) {
dest->direct_io = params->direct_io;
}
+
+ if (params->has_accel_path) {
+ dest->has_accel_path = true;
+ dest->accel_path = params->accel_path;
+ }
}
static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
@@ -1387,6 +1411,12 @@ static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
if (params->has_direct_io) {
s->parameters.direct_io = params->direct_io;
}
+ if (params->has_accel_path) {
+ qapi_free_strList(s->parameters.accel_path);
+ s->parameters.has_accel_path = true;
+ s->parameters.accel_path =
+ QAPI_CLONE(strList, params->accel_path);
+ }
}
void qmp_migrate_set_parameters(MigrateSetParameters *params, Error **errp)
@@ -85,6 +85,7 @@ const char *migrate_tls_creds(void);
const char *migrate_tls_hostname(void);
uint64_t migrate_xbzrle_cache_size(void);
ZeroPageDetection migrate_zero_page_detection(void);
+const strList *migrate_accel_path(void);
/* parameters helpers */
@@ -629,10 +629,14 @@
# multifd migration is enabled, else in the main migration thread
# as for @legacy.
#
+# @dsa-accel: Perform zero page checking with the DSA accelerator
+# offloading in multifd sender thread if multifd migration is
+# enabled, else in the main migration thread as for @legacy.
+#
# Since: 9.0
##
{ 'enum': 'ZeroPageDetection',
- 'data': [ 'none', 'legacy', 'multifd' ] }
+ 'data': [ 'none', 'legacy', 'multifd', 'dsa-accel' ] }
##
# @BitmapMigrationBitmapAliasTransform:
@@ -840,6 +844,12 @@
# See description in @ZeroPageDetection. Default is 'multifd'.
# (since 9.0)
#
+# @accel-path: If enabled, specify the accelerator paths that to be
+# used in QEMU. For example, enable DSA accelerator for zero page
+# detection offloading by setting the @zero-page-detection to
+# dsa-accel, and defines the accel-path to "dsa:<dsa_device path>".
+# This parameter is default to an empty list. (Since 10.0)
+#
# @direct-io: Open migration files with O_DIRECT when possible. This
# only has effect if the @mapped-ram capability is enabled.
# (Since 9.1)
@@ -858,7 +868,7 @@
'cpu-throttle-initial', 'cpu-throttle-increment',
'cpu-throttle-tailslow',
'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
- 'avail-switchover-bandwidth', 'downtime-limit',
+ 'avail-switchover-bandwidth', 'downtime-limit', 'accel-path',
{ 'name': 'x-checkpoint-delay', 'features': [ 'unstable' ] },
'multifd-channels',
'xbzrle-cache-size', 'max-postcopy-bandwidth',
@@ -1021,6 +1031,12 @@
# See description in @ZeroPageDetection. Default is 'multifd'.
# (since 9.0)
#
+# @accel-path: If enabled, specify the accelerator paths that to be
+# used in QEMU. For example, enable DSA accelerator for zero page
+# detection offloading by setting the @zero-page-detection to
+# dsa-accel, and defines the accel-path to "dsa:<dsa_device path>".
+# This parameter is default to an empty list. (Since 10.0)
+#
# @direct-io: Open migration files with O_DIRECT when possible. This
# only has effect if the @mapped-ram capability is enabled.
# (Since 9.1)
@@ -1066,7 +1082,8 @@
'*vcpu-dirty-limit': 'uint64',
'*mode': 'MigMode',
'*zero-page-detection': 'ZeroPageDetection',
- '*direct-io': 'bool' } }
+ '*direct-io': 'bool',
+ '*accel-path': [ 'str' ] } }
##
# @migrate-set-parameters:
@@ -1231,6 +1248,12 @@
# See description in @ZeroPageDetection. Default is 'multifd'.
# (since 9.0)
#
+# @accel-path: If enabled, specify the accelerator paths that to be
+# used in QEMU. For example, enable DSA accelerator for zero page
+# detection offloading by setting the @zero-page-detection to
+# dsa-accel, and defines the accel-path to "dsa:<dsa_device path>".
+# This parameter is default to an empty list. (Since 10.0)
+#
# @direct-io: Open migration files with O_DIRECT when possible. This
# only has effect if the @mapped-ram capability is enabled.
# (Since 9.1)
@@ -1273,7 +1296,8 @@
'*vcpu-dirty-limit': 'uint64',
'*mode': 'MigMode',
'*zero-page-detection': 'ZeroPageDetection',
- '*direct-io': 'bool' } }
+ '*direct-io': 'bool',
+ '*accel-path': [ 'str' ] } }
##
# @query-migrate-parameters:
@@ -23,6 +23,7 @@
#include "qemu/bswap.h"
#include "qemu/error-report.h"
#include "qemu/rcu.h"
+#include <cpuid.h>
#pragma GCC push_options
#pragma GCC target("enqcmd")
@@ -687,6 +688,36 @@ static void dsa_completion_thread_stop(void *opaque)
qemu_sem_destroy(&thread_context->sem_init_done);
}
+/**
+ * @brief Check if DSA is supported.
+ *
+ * @return True if DSA is supported, otherwise false.
+ */
+bool qemu_dsa_is_supported(void)
+{
+ /*
+ * movdir64b is indicated by bit 28 of ecx in CPUID leaf 7, subleaf 0.
+ * enqcmd is indicated by bit 29 of ecx in CPUID leaf 7, subleaf 0.
+ * Doc: https://cdrdv2-public.intel.com/819680/architecture-instruction-\
+ * set-extensions-programming-reference.pdf
+ */
+ uint32_t eax, ebx, ecx, edx;
+ bool movedirb_enabled;
+ bool enqcmd_enabled;
+
+ __get_cpuid_count(7, 0, &eax, &ebx, &ecx, &edx);
+ movedirb_enabled = (ecx >> 28) & 0x1;
+ if (!movedirb_enabled) {
+ return false;
+ }
+ enqcmd_enabled = (ecx >> 29) & 0x1;
+ if (!enqcmd_enabled) {
+ return false;
+ }
+
+ return true;
+}
+
/**
* @brief Check if DSA is running.
*