| Message ID | 2abb4613ef6834de76f1167ffb11c732cc826d2b.1712577715.git.yong.huang@smartx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Fix crash of VMs configured with the CDROM device | expand |
Ping On Mon, Apr 8, 2024 at 8:08 PM Hyman Huang <yong.huang@smartx.com> wrote: > When configuring VMs with the CDROM device using the USB bus > in Libvirt, do as follows: > > <disk type='file' device='cdrom'> > <driver name='qemu' type='raw'/> > <source file='/path/to/share_fs/cdrom.iso'/> > <target dev='sda' bus='usb'/> > <readonly/> > <address type='usb' bus='0' port='2'/> > </disk> > <controller type='usb' index='0' model='piix3-uhci'/> > > The destination Qemu process crashed, causing the VM migration > to fail; the backtrace reveals the following: > > Program terminated with signal SIGSEGV, Segmentation fault. > 0 __memmove_sse2_unaligned_erms () at > ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:312 > 312 movq -8(%rsi,%rdx), %rcx > [Current thread is 1 (Thread 0x7f0a9025fc00 (LWP 3286206))] > (gdb) bt > 0 __memmove_sse2_unaligned_erms () at > ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:312 > 1 memcpy (__len=8, __src=<optimized out>, __dest=<optimized out>) at > /usr/include/bits/string_fortified.h:34 > 2 iov_from_buf_full (iov=<optimized out>, iov_cnt=<optimized out>, > offset=<optimized out>, buf=0x0, bytes=bytes@entry=8) at ../util/iov.c:33 > 3 iov_from_buf (bytes=8, buf=<optimized out>, offset=<optimized out>, > iov_cnt=<optimized out>, iov=<optimized out>) > at > /usr/src/debug/qemu-6-6.2.0-75.7.oe1.smartx.git.40.x86_64/include/qemu/iov.h:49 > 4 usb_packet_copy (p=p@entry=0x56066b2fb5a0, ptr=<optimized out>, > bytes=bytes@entry=8) at ../hw/usb/core.c:636 > 5 usb_msd_copy_data (s=s@entry=0x56066c62c770, p=p@entry=0x56066b2fb5a0) > at ../hw/usb/dev-storage.c:186 > 6 usb_msd_handle_data (dev=0x56066c62c770, p=0x56066b2fb5a0) at > ../hw/usb/dev-storage.c:496 > 7 usb_handle_packet (dev=0x56066c62c770, p=p@entry=0x56066b2fb5a0) at > ../hw/usb/core.c:455 > 8 uhci_handle_td (s=s@entry=0x56066bd5f210, q=0x56066bb7fbd0, q@entry=0x0, > qh_addr=qh_addr@entry=902518530, td=td@entry=0x7fffe6e788f0, > td_addr=<optimized out>, > int_mask=int_mask@entry=0x7fffe6e788e4) at ../hw/usb/hcd-uhci.c:885 > 9 uhci_process_frame (s=s@entry=0x56066bd5f210) at > ../hw/usb/hcd-uhci.c:1061 > 10 uhci_frame_timer (opaque=opaque@entry=0x56066bd5f210) at > ../hw/usb/hcd-uhci.c:1159 > 11 timerlist_run_timers (timer_list=0x56066af26bd0) at > ../util/qemu-timer.c:642 > 12 qemu_clock_run_timers (type=QEMU_CLOCK_VIRTUAL) at > ../util/qemu-timer.c:656 > 13 qemu_clock_run_all_timers () at ../util/qemu-timer.c:738 > 14 main_loop_wait (nonblocking=nonblocking@entry=0) at > ../util/main-loop.c:542 > 15 qemu_main_loop () at ../softmmu/runstate.c:739 > 16 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) > at ../softmmu/main.c:52 > (gdb) frame 5 > (gdb) p ((SCSIDiskReq *)s->req)->iov > $1 = {iov_base = 0x0, iov_len = 0} > (gdb) p/x s->req->tag > $2 = 0x472 > > The scsi commands that the CDROM issued are wrapped as the > payload of the USB protocol in Qemu's implementation of a > USB mass storage device, which is used to implement a > CDROM device that uses a USB bus. > > In general, the USB controller processes SCSI commands in > two phases. Sending the OUT USB package that encapsulates > the SCSI command is the first stage; scsi-disk would handle > this by emulating the SCSI operation. Receiving the IN USB > package containing the SCSI operation's output is the second > stage. Additionally, the SCSI request tag tracks the request > during the procedure. > > Since QEMU did not migrate the flying SCSI request, the > output of the SCSI may be lost if the live migration is > initiated between the two previously mentioned steps. > > In our scenario, the SCSI command is GET_EVENT_STATUS_NOTIFICATION, > the QEMU log information below demonstrates how the SCSI command > is being handled (first step) on the source: > > usb_packet_state_change bus 0, port 2, ep 2, packet 0x559f9ba14b00, state > undef -> setup > usb_msd_cmd_submit lun 0, tag 0x472, flags 0x00000080, len 10, data-len 8 > > After migration, the VM crashed as soon as the destination's UHCI > controller began processing the remaining portion of the SCSI > request (second step)! Here is how the QEMU logged out: > > usb_packet_state_change bus 0, port 2, ep 1, packet 0x56066b2fb5a0, state > undef -> setup > usb_msd_data_in 8/8 (scsi 8) > shutting down, reason=crashed > > To summarize, the missing scsi request during a live migration > may cause a VM configured with a CDROM to crash. > > Migrating the SCSI request that the scsi-disk is handling is > the simple approach, assuming that it actually exists. > > Signed-off-by: Hyman Huang <yong.huang@smartx.com> > --- > hw/scsi/scsi-disk.c | 24 +++++++++++++++++++++++- > 1 file changed, 23 insertions(+), 1 deletion(-) > > diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c > index 0985676f73..d6e9d9e8d4 100644 > --- a/hw/scsi/scsi-disk.c > +++ b/hw/scsi/scsi-disk.c > @@ -160,6 +160,16 @@ static void scsi_disk_save_request(QEMUFile *f, > SCSIRequest *req) > } > } > > +static void scsi_disk_emulate_save_request(QEMUFile *f, SCSIRequest *req) > +{ > + SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); > + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); > + > + if (s->migrate_emulate_scsi_request) { > + scsi_disk_save_request(f, req); > + } > +} > + > static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req) > { > SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); > @@ -183,6 +193,16 @@ static void scsi_disk_load_request(QEMUFile *f, > SCSIRequest *req) > qemu_iovec_init_external(&r->qiov, &r->iov, 1); > } > > +static void scsi_disk_emulate_load_request(QEMUFile *f, SCSIRequest *req) > +{ > + SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); > + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); > + > + if (s->migrate_emulate_scsi_request) { > + scsi_disk_load_request(f, req); > + } > +} > + > /* > * scsi_handle_rw_error has two return values. False means that the error > * must be ignored, true means that the error has been processed and the > @@ -2593,6 +2613,8 @@ static const SCSIReqOps scsi_disk_emulate_reqops = { > .read_data = scsi_disk_emulate_read_data, > .write_data = scsi_disk_emulate_write_data, > .get_buf = scsi_get_buf, > + .load_request = scsi_disk_emulate_load_request, > + .save_request = scsi_disk_emulate_save_request, > }; > I would like to know why load_request and save_request hooks were not initially present in the scsi_disk_emulate_reqops. Are there any historical considerations? > static const SCSIReqOps scsi_disk_dma_reqops = { > @@ -3137,7 +3159,7 @@ static Property scsi_hd_properties[] = { > static int scsi_disk_pre_save(void *opaque) > { > SCSIDiskState *dev = opaque; > - dev->migrate_emulate_scsi_request = false; > + dev->migrate_emulate_scsi_request = true; > > return 0; > } > -- > 2.39.3 > > Thanks, Yong
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index 0985676f73..d6e9d9e8d4 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -160,6 +160,16 @@ static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req) } } +static void scsi_disk_emulate_save_request(QEMUFile *f, SCSIRequest *req) +{ + SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); + + if (s->migrate_emulate_scsi_request) { + scsi_disk_save_request(f, req); + } +} + static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req) { SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); @@ -183,6 +193,16 @@ static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req) qemu_iovec_init_external(&r->qiov, &r->iov, 1); } +static void scsi_disk_emulate_load_request(QEMUFile *f, SCSIRequest *req) +{ + SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); + + if (s->migrate_emulate_scsi_request) { + scsi_disk_load_request(f, req); + } +} + /* * scsi_handle_rw_error has two return values. False means that the error * must be ignored, true means that the error has been processed and the @@ -2593,6 +2613,8 @@ static const SCSIReqOps scsi_disk_emulate_reqops = { .read_data = scsi_disk_emulate_read_data, .write_data = scsi_disk_emulate_write_data, .get_buf = scsi_get_buf, + .load_request = scsi_disk_emulate_load_request, + .save_request = scsi_disk_emulate_save_request, }; static const SCSIReqOps scsi_disk_dma_reqops = { @@ -3137,7 +3159,7 @@ static Property scsi_hd_properties[] = { static int scsi_disk_pre_save(void *opaque) { SCSIDiskState *dev = opaque; - dev->migrate_emulate_scsi_request = false; + dev->migrate_emulate_scsi_request = true; return 0; }
When configuring VMs with the CDROM device using the USB bus in Libvirt, do as follows: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/path/to/share_fs/cdrom.iso'/> <target dev='sda' bus='usb'/> <readonly/> <address type='usb' bus='0' port='2'/> </disk> <controller type='usb' index='0' model='piix3-uhci'/> The destination Qemu process crashed, causing the VM migration to fail; the backtrace reveals the following: Program terminated with signal SIGSEGV, Segmentation fault. 0 __memmove_sse2_unaligned_erms () at ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:312 312 movq -8(%rsi,%rdx), %rcx [Current thread is 1 (Thread 0x7f0a9025fc00 (LWP 3286206))] (gdb) bt 0 __memmove_sse2_unaligned_erms () at ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:312 1 memcpy (__len=8, __src=<optimized out>, __dest=<optimized out>) at /usr/include/bits/string_fortified.h:34 2 iov_from_buf_full (iov=<optimized out>, iov_cnt=<optimized out>, offset=<optimized out>, buf=0x0, bytes=bytes@entry=8) at ../util/iov.c:33 3 iov_from_buf (bytes=8, buf=<optimized out>, offset=<optimized out>, iov_cnt=<optimized out>, iov=<optimized out>) at /usr/src/debug/qemu-6-6.2.0-75.7.oe1.smartx.git.40.x86_64/include/qemu/iov.h:49 4 usb_packet_copy (p=p@entry=0x56066b2fb5a0, ptr=<optimized out>, bytes=bytes@entry=8) at ../hw/usb/core.c:636 5 usb_msd_copy_data (s=s@entry=0x56066c62c770, p=p@entry=0x56066b2fb5a0) at ../hw/usb/dev-storage.c:186 6 usb_msd_handle_data (dev=0x56066c62c770, p=0x56066b2fb5a0) at ../hw/usb/dev-storage.c:496 7 usb_handle_packet (dev=0x56066c62c770, p=p@entry=0x56066b2fb5a0) at ../hw/usb/core.c:455 8 uhci_handle_td (s=s@entry=0x56066bd5f210, q=0x56066bb7fbd0, q@entry=0x0, qh_addr=qh_addr@entry=902518530, td=td@entry=0x7fffe6e788f0, td_addr=<optimized out>, int_mask=int_mask@entry=0x7fffe6e788e4) at ../hw/usb/hcd-uhci.c:885 9 uhci_process_frame (s=s@entry=0x56066bd5f210) at ../hw/usb/hcd-uhci.c:1061 10 uhci_frame_timer (opaque=opaque@entry=0x56066bd5f210) at ../hw/usb/hcd-uhci.c:1159 11 timerlist_run_timers (timer_list=0x56066af26bd0) at ../util/qemu-timer.c:642 12 qemu_clock_run_timers (type=QEMU_CLOCK_VIRTUAL) at ../util/qemu-timer.c:656 13 qemu_clock_run_all_timers () at ../util/qemu-timer.c:738 14 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:542 15 qemu_main_loop () at ../softmmu/runstate.c:739 16 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:52 (gdb) frame 5 (gdb) p ((SCSIDiskReq *)s->req)->iov $1 = {iov_base = 0x0, iov_len = 0} (gdb) p/x s->req->tag $2 = 0x472 The scsi commands that the CDROM issued are wrapped as the payload of the USB protocol in Qemu's implementation of a USB mass storage device, which is used to implement a CDROM device that uses a USB bus. In general, the USB controller processes SCSI commands in two phases. Sending the OUT USB package that encapsulates the SCSI command is the first stage; scsi-disk would handle this by emulating the SCSI operation. Receiving the IN USB package containing the SCSI operation's output is the second stage. Additionally, the SCSI request tag tracks the request during the procedure. Since QEMU did not migrate the flying SCSI request, the output of the SCSI may be lost if the live migration is initiated between the two previously mentioned steps. In our scenario, the SCSI command is GET_EVENT_STATUS_NOTIFICATION, the QEMU log information below demonstrates how the SCSI command is being handled (first step) on the source: usb_packet_state_change bus 0, port 2, ep 2, packet 0x559f9ba14b00, state undef -> setup usb_msd_cmd_submit lun 0, tag 0x472, flags 0x00000080, len 10, data-len 8 After migration, the VM crashed as soon as the destination's UHCI controller began processing the remaining portion of the SCSI request (second step)! Here is how the QEMU logged out: usb_packet_state_change bus 0, port 2, ep 1, packet 0x56066b2fb5a0, state undef -> setup usb_msd_data_in 8/8 (scsi 8) shutting down, reason=crashed To summarize, the missing scsi request during a live migration may cause a VM configured with a CDROM to crash. Migrating the SCSI request that the scsi-disk is handling is the simple approach, assuming that it actually exists. Signed-off-by: Hyman Huang <yong.huang@smartx.com> --- hw/scsi/scsi-disk.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)