diff mbox

[v1,2/4] register: Add GPIO API

Message ID 332efee70b5de45475292cb49438a210254db103.1467746249.git.alistair.francis@xilinx.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alistair Francis July 5, 2016, 8:30 p.m. UTC
Add GPIO functionality to the register API. This allows association
and automatic connection of GPIOs to bits in registers. GPIO inputs
will attach to handlers that automatically set read-only bits in
registers. GPIO outputs will be updated to reflect their field value
when their respective registers are written (or reset). Supports
active low GPIOs.

This is particularly effective for implementing system level
controllers, where heterogenous collections of control signals are
placed is a SoC specific peripheral then propagated all over the
system.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
---

 hw/core/register.c    | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/hw/register.h | 31 +++++++++++++++-
 2 files changed, 127 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/hw/core/register.c b/hw/core/register.c
index 4bfbc50..3987af6 100644
--- a/hw/core/register.c
+++ b/hw/core/register.c
@@ -108,6 +108,7 @@  void register_write(RegisterInfo *reg, uint64_t val, uint64_t we,
     }
 
     register_write_val(reg, new_val);
+    register_refresh_gpios(reg, old_val, debug);
 
     if (ac->post_write) {
         ac->post_write(reg, new_val);
@@ -151,23 +152,119 @@  uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix,
 void register_reset(RegisterInfo *reg)
 {
     g_assert(reg);
+    uint64_t old_val;
 
     if (!reg->data || !reg->access) {
         return;
     }
 
+    old_val = register_read_val(reg);
+
     register_write_val(reg, reg->access->reset);
+    register_refresh_gpios(reg, old_val, false);
+}
+
+void register_refresh_gpios(RegisterInfo *reg, uint64_t old_value, bool debug)
+{
+    const RegisterAccessInfo *ac;
+    const RegisterGPIOMapping *gpio;
+
+    ac = reg->access;
+    for (gpio = ac->gpios; gpio && gpio->name; gpio++) {
+        int i;
+
+        if (gpio->input) {
+            continue;
+        }
+
+        for (i = 0; i < gpio->num; ++i) {
+            uint64_t gpio_value, gpio_value_old;
+
+            qemu_irq gpo = qdev_get_gpio_out_connector(DEVICE(reg),
+                                                       gpio->name, i);
+            gpio_value_old = extract64(old_value,
+                                       gpio->bit_pos + i * gpio->width,
+                                       gpio->width) ^ gpio->polarity;
+            gpio_value = extract64(register_read_val(reg),
+                                   gpio->bit_pos + i * gpio->width,
+                                   gpio->width) ^ gpio->polarity;
+            if (!(gpio_value_old ^ gpio_value)) {
+                continue;
+            }
+            if (debug && gpo) {
+                qemu_log("refreshing gpio out %s to %" PRIx64 "\n",
+                         gpio->name, gpio_value);
+            }
+            qemu_set_irq(gpo, gpio_value);
+        }
+    }
+}
+
+typedef struct DeviceNamedGPIOHandlerOpaque {
+    DeviceState *dev;
+    const char *name;
+} DeviceNamedGPIOHandlerOpaque;
+
+static void register_gpio_handler(void *opaque, int n, int level)
+{
+    DeviceNamedGPIOHandlerOpaque *gho = opaque;
+    RegisterInfo *reg = REGISTER(gho->dev);
+
+    const RegisterAccessInfo *ac;
+    const RegisterGPIOMapping *gpio;
+
+    ac = reg->access;
+    for (gpio = ac->gpios; gpio && gpio->name; gpio++) {
+        if (gpio->input && !strcmp(gho->name, gpio->name)) {
+            register_write_val(reg, deposit64(register_read_val(reg),
+                                              gpio->bit_pos + n * gpio->width,
+                                              gpio->width,
+                                              level ^ gpio->polarity));
+            return;
+        }
+    }
+
+    abort();
 }
 
 void register_init(RegisterInfo *reg)
 {
     assert(reg);
+    const RegisterAccessInfo *ac;
+    const RegisterGPIOMapping *gpio;
 
     if (!reg->data || !reg->access) {
         return;
     }
 
     object_initialize((void *)reg, sizeof(*reg), TYPE_REGISTER);
+
+    ac = reg->access;
+    for (gpio = ac->gpios; gpio && gpio->name; gpio++) {
+        if (!gpio->num) {
+            ((RegisterGPIOMapping *)gpio)->num = 1;
+        }
+        if (!gpio->width) {
+            ((RegisterGPIOMapping *)gpio)->width = 1;
+        }
+        if (gpio->input) {
+            DeviceNamedGPIOHandlerOpaque gho = {
+                .name = gpio->name,
+                .dev = DEVICE(reg),
+            };
+            qemu_irq irq;
+
+            qdev_init_gpio_in_named(DEVICE(reg), register_gpio_handler,
+                                    gpio->name, gpio->num);
+            irq = qdev_get_gpio_in_named(DEVICE(reg), gpio->name, gpio->num);
+            qemu_irq_set_opaque(irq, g_memdup(&gho, sizeof(gho)));
+        } else {
+            qemu_irq *gpos = g_new0(qemu_irq, gpio->num);
+
+            qdev_init_gpio_out_named(DEVICE(reg), gpos, gpio->name, gpio->num);
+            qdev_pass_gpios(DEVICE(reg), reg->opaque, gpio->name);
+        }
+    }
 }
 
 void register_write_memory(void *opaque, hwaddr addr,
diff --git a/include/hw/register.h b/include/hw/register.h
index 8c12233..94967a4 100644
--- a/include/hw/register.h
+++ b/include/hw/register.h
@@ -13,11 +13,24 @@ 
 
 #include "hw/qdev-core.h"
 #include "exec/memory.h"
+#include "hw/irq.h"
 
 typedef struct RegisterInfo RegisterInfo;
 typedef struct RegisterAccessInfo RegisterAccessInfo;
 typedef struct RegisterInfoArray RegisterInfoArray;
 
+#define REG_GPIO_POL_HIGH 0
+#define REG_GPIO_POL_LOW  1
+
+typedef struct RegisterGPIOMapping {
+    const char *name;
+    uint8_t bit_pos;
+    bool input;
+    bool polarity;
+    uint8_t num;
+    uint8_t width;
+} RegisterGPIOMapping;
+
 /**
  * Access description for a register that is part of guest accessible device
  * state.
@@ -55,6 +68,8 @@  struct RegisterAccessInfo {
     uint64_t (*post_read)(RegisterInfo *reg, uint64_t val);
 
     hwaddr addr;
+
+    const RegisterGPIOMapping *gpios;
 };
 
 /**
@@ -141,13 +156,27 @@  uint64_t register_read(RegisterInfo *reg, uint64_t re, const char* prefix,
 void register_reset(RegisterInfo *reg);
 
 /**
- * Initialize a register.
+ * Initialize a register. This will also setup any GPIO links which are used
+ * to connect register updates in one device to other devices. Generally this
+ * is useful for interrupt propagation.
  * @reg: Register to initialize
  */
 
 void register_init(RegisterInfo *reg);
 
 /**
+ * Refresh GPIO outputs based on diff between old value register current value.
+ * GPIOs are refreshed for fields where the old value differs to the current
+ * value.
+ *
+ * @reg: Register to refresh GPIO outs
+ * @old_value: previous value of register
+ * @debug: Should the read operation debug information be printed?
+ */
+
+void register_refresh_gpios(RegisterInfo *reg, uint64_t old_value, bool debug);
+
+/**
  * Memory API MMIO write handler that will write to a Register API register.
  * @opaque: RegisterInfo to write to
  * @addr: Address to write