@@ -3,6 +3,7 @@
#include "hw/pci/pci.h"
#include "hw/pci/pcie.h"
+#include "hw/pci/pcie_doe.h"
#define TYPE_PCI_DEVICE "pci-device"
typedef struct PCIDeviceClass PCIDeviceClass;
@@ -159,6 +160,12 @@ struct PCIDevice {
MSIVectorReleaseNotifier msix_vector_release_notifier;
MSIVectorPollNotifier msix_vector_poll_notifier;
+ /* SPDM */
+ uint16_t spdm_port;
+
+ /* DOE */
+ DOECap doe_spdm;
+
/* ID of standby device in net_failover pair */
char *failover_pair_id;
uint32_t acpi_index;
@@ -108,6 +108,9 @@ struct DOECap {
/* Protocols and its callback response */
DOEProtocol *protocols;
uint16_t protocol_num;
+
+ /* Used for spdm-socket */
+ int spdm_socket;
};
void pcie_doe_init(PCIDevice *pdev, DOECap *doe_cap, uint16_t offset,
@@ -203,6 +203,7 @@
#include "sysemu/hostmem.h"
#include "hw/pci/msix.h"
#include "hw/pci/pcie_sriov.h"
+#include "sysemu/spdm-socket.h"
#include "migration/vmstate.h"
#include "nvme.h"
@@ -8113,6 +8114,27 @@ static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
return 0;
}
+static bool pcie_doe_spdm_rsp(DOECap *doe_cap)
+{
+ void *req = pcie_doe_get_write_mbox_ptr(doe_cap);
+ uint32_t req_len = pcie_doe_get_obj_len(req) * 4;
+ void *rsp = doe_cap->read_mbox;
+ uint32_t rsp_len = SPDM_SOCKET_MAX_MESSAGE_BUFFER_SIZE;
+
+ uint32_t recvd = spdm_socket_rsp(doe_cap->spdm_socket,
+ SPDM_SOCKET_TRANSPORT_TYPE_PCI_DOE,
+ req, req_len, rsp, rsp_len);
+ doe_cap->read_mbox_len += DIV_ROUND_UP(recvd, 4);
+
+ return recvd != 0;
+}
+
+static DOEProtocol doe_spdm_prot[] = {
+ { PCI_VENDOR_ID_PCI_SIG, PCI_SIG_DOE_CMA, pcie_doe_spdm_rsp },
+ { PCI_VENDOR_ID_PCI_SIG, PCI_SIG_DOE_SECURED_CMA, pcie_doe_spdm_rsp },
+ { }
+};
+
static bool nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
ERRP_GUARD();
@@ -8200,6 +8222,25 @@ static bool nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
+ pcie_cap_deverr_init(pci_dev);
+
+ /* DOE Initialisation */
+ if (pci_dev->spdm_port) {
+ uint16_t doe_offset = n->params.sriov_max_vfs ?
+ PCI_CONFIG_SPACE_SIZE + PCI_ARI_SIZEOF
+ : PCI_CONFIG_SPACE_SIZE;
+
+ pcie_doe_init(pci_dev, &pci_dev->doe_spdm, doe_offset,
+ doe_spdm_prot, true, 0);
+
+ pci_dev->doe_spdm.spdm_socket = spdm_socket_connect(pci_dev->spdm_port,
+ errp);
+
+ if (pci_dev->doe_spdm.spdm_socket < 0) {
+ return false;
+ }
+ }
+
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
}
@@ -8446,6 +8487,11 @@ static void nvme_exit(PCIDevice *pci_dev)
g_free(n->cmb.buf);
}
+ if (pci_dev->doe_spdm.spdm_socket > 0) {
+ spdm_socket_close(pci_dev->doe_spdm.spdm_socket,
+ SPDM_SOCKET_TRANSPORT_TYPE_PCI_DOE);
+ }
+
if (n->pmr.dev) {
host_memory_backend_set_mapped(n->pmr.dev, false);
}
@@ -8491,6 +8537,7 @@ static Property nvme_props[] = {
DEFINE_PROP_BOOL("msix-exclusive-bar", NvmeCtrl, params.msix_exclusive_bar,
false),
DEFINE_PROP_UINT16("mqes", NvmeCtrl, params.mqes, 0x7ff),
+ DEFINE_PROP_UINT16("spdm_port", PCIDevice, spdm_port, 0),
DEFINE_PROP_END_OF_LIST(),
};
@@ -8562,11 +8609,25 @@ static void nvme_pci_write_config(PCIDevice *dev, uint32_t address,
{
uint16_t old_num_vfs = pcie_sriov_num_vfs(dev);
+ if (pcie_find_capability(dev, PCI_EXT_CAP_ID_DOE)) {
+ pcie_doe_write_config(&dev->doe_spdm, address, val, len);
+ }
pci_default_write_config(dev, address, val, len);
pcie_cap_flr_write_config(dev, address, val, len);
nvme_sriov_post_write_config(dev, old_num_vfs);
}
+static uint32_t nvme_pci_read_config(PCIDevice *dev, uint32_t address, int len)
+{
+ uint32_t val;
+ if (dev->spdm_port && pcie_find_capability(dev, PCI_EXT_CAP_ID_DOE)) {
+ if (pcie_doe_read_config(&dev->doe_spdm, address, len, &val)) {
+ return val;
+ }
+ }
+ return pci_default_read_config(dev, address, len);
+}
+
static const VMStateDescription nvme_vmstate = {
.name = "nvme",
.unmigratable = 1,
@@ -8579,6 +8640,7 @@ static void nvme_class_init(ObjectClass *oc, void *data)
pc->realize = nvme_realize;
pc->config_write = nvme_pci_write_config;
+ pc->config_read = nvme_pci_read_config;
pc->exit = nvme_exit;
pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
pc->revision = 2;
@@ -29,6 +29,7 @@ guest hardware that is specific to QEMU.
edu
ivshmem-spec
pvpanic
+ spdm
standard-vga
virt-ctlr
vmcoreinfo
new file mode 100644
@@ -0,0 +1,134 @@
+======================================================
+QEMU Security Protocols and Data Models (SPDM) Support
+======================================================
+
+SPDM enables authentication, attestation and key exchange to assist in
+providing infrastructure security enablement. It's a standard published
+by the `DMTF`_.
+
+QEMU supports connecting to a SPDM responder implementation. This allows an
+external application to emulate the SPDM responder logic for an SPDM device.
+
+Setting up a SPDM server
+========================
+
+When using QEMU with SPDM devices QEMU will connect to a server which
+implements the SPDM functionality.
+
+SPDM-Utils
+----------
+
+You can use `SPDM Utils`_ to emulate a responder. This is the simplest method.
+
+SPDM-Utils is a Linux applications to manage, test and develop devices
+supporting DMTF Security Protocol and Data Model (SPDM). It is written in Rust
+and utilises libspdm.
+
+To use SPDM-Utils you will need to do the following steps. Details are included
+in the SPDM-Utils README.
+
+ 1. `Build libspdm`_
+ 2. `Build SPDM Utils`_
+ 3. `Run it as a server`_
+
+spdm-emu
+--------
+
+You can use `spdm emu`_ to model the
+SPDM responder.
+
+.. code-block:: shell
+
+ $ cd spdm-emu
+ $ git submodule init; git submodule update --recursive
+ $ mkdir build; cd build
+ $ cmake -DARCH=x64 -DTOOLCHAIN=GCC -DTARGET=Debug -DCRYPTO=openssl ..
+ $ make -j32
+ $ make copy_sample_key # Build certificates, required for SPDM authentication.
+
+It is worth noting that the certificates should be in compliance with
+PCIe r6.1 sec 6.31.3. This means you will need to add the following to
+openssl.cnf
+
+.. code-block::
+
+ subjectAltName = otherName:2.23.147;UTF8:Vendor=1b36:Device=0010:CC=010802:REV=02:SSVID=1af4:SSID=1100
+ 2.23.147 = ASN1:OID:2.23.147
+
+and then manually regenerate some certificates with:
+
+.. code-block:: shell
+
+ $ openssl req -nodes -newkey ec:param.pem -keyout end_responder.key \
+ -out end_responder.req -sha384 -batch \
+ -subj "/CN=DMTF libspdm ECP384 responder cert"
+
+ $ openssl x509 -req -in end_responder.req -out end_responder.cert \
+ -CA inter.cert -CAkey inter.key -sha384 -days 3650 -set_serial 3 \
+ -extensions v3_end -extfile ../openssl.cnf
+
+ $ openssl asn1parse -in end_responder.cert -out end_responder.cert.der
+
+ $ cat ca.cert.der inter.cert.der end_responder.cert.der > bundle_responder.certchain.der
+
+You can use SPDM-Utils instead as it will generate the correct certificates
+automatically.
+
+The responder can then be launched with
+
+.. code-block:: shell
+
+ $ cd bin
+ $ ./spdm_responder_emu --trans PCI_DOE
+
+Connecting an SPDM NVMe device
+==============================
+
+Once a SPDM server is running we can start QEMU and connect to the server.
+
+For an NVMe device first let's setup a block we can use
+
+.. code-block:: shell
+
+ $ cd qemu-spdm/linux/image
+ $ dd if=/dev/zero of=blknvme bs=1M count=2096 # 2GB NNMe Drive
+
+Then you can add this to your QEMU command line:
+
+.. code-block:: shell
+
+ -drive file=blknvme,if=none,id=mynvme,format=raw \
+ -device nvme,drive=mynvme,serial=deadbeef,spdm_port=2323
+
+At which point QEMU will try to connect to the SPDM server.
+
+Note that if using x64-64 you will want to use the q35 machine instead
+of the default. So the entire QEMU command might look like this
+
+.. code-block:: shell
+
+ qemu-system-x86_64 -M q35 \
+ --kernel bzImage \
+ -drive file=rootfs.ext2,if=virtio,format=raw \
+ -append "root=/dev/vda console=ttyS0" \
+ -net none -nographic \
+ -drive file=blknvme,if=none,id=mynvme,format=raw \
+ -device nvme,drive=mynvme,serial=deadbeef,spdm_port=2323
+
+.. _DMTF:
+ https://www.dmtf.org/standards/SPDM
+
+.. _SPDM Utils:
+ https://github.com/westerndigitalcorporation/spdm-utils
+
+.. _spdm emu:
+ https://github.com/dmtf/spdm-emu
+
+.. _Build libspdm:
+ https://github.com/westerndigitalcorporation/spdm-utils?tab=readme-ov-file#build-libspdm
+
+.. _Build SPDM Utils:
+ https://github.com/westerndigitalcorporation/spdm-utils?tab=readme-ov-file#build-the-binary
+
+.. _Run it as a server:
+ https://github.com/westerndigitalcorporation/spdm-utils#qemu-spdm-device-emulation