| Message ID | ee386866ca7ba80add0c428b59efb936fd7ce797.camel@yadro.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw: gpio: introduce pcf8574 driver | expand |
Hi Dmitriy, On 1/3/24 08:36, Dmitriy Sharikhin wrote: > NXP PCF8574 and compatible ICs are simple I2C GPIO expanders. > PCF8574 incorporates quasi-bidirectional IO, and simple > communication protocol, when IO read is I2C byte read, and > IO write is I2C byte write. User can think of it as > open-drain port, when line high state is input and line low > state is output. > > This patch allow to instantiate virtual I2C device called > "pcf8574" in machine init code via generic mechanism. > > Signed-off-by: Dmitrii Sharikhin <d.sharikhin@yadro.com> > --- > hw/gpio/Kconfig | 4 ++ > hw/gpio/meson.build | 1 + > hw/gpio/pcf8574.c | 139 ++++++++++++++++++++++++++++++++++++++ > include/hw/gpio/pcf8574.h | 15 ++++ > 4 files changed, 159 insertions(+) > create mode 100644 hw/gpio/pcf8574.c > create mode 100644 include/hw/gpio/pcf8574.h > > diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig > index d2cf3accc8..bb731ff4ce 100644 > --- a/hw/gpio/Kconfig > +++ b/hw/gpio/Kconfig > @@ -16,3 +16,7 @@ config GPIO_PWR > > config SIFIVE_GPIO > bool > + > +config PCF8574 > + bool > + depends on I2C > diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build > index 8a8d03d885..c0d9a3c757 100644 > --- a/hw/gpio/meson.build > +++ b/hw/gpio/meson.build > @@ -15,3 +15,4 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files( > )) > system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) > system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) > +system_ss.add(when: 'CONFIG_PCF8574', if_true: files('pcf8574.c')) > diff --git a/hw/gpio/pcf8574.c b/hw/gpio/pcf8574.c > new file mode 100644 > index 0000000000..a6c6bd36fa > --- /dev/null > +++ b/hw/gpio/pcf8574.c > @@ -0,0 +1,139 @@ > +/* > + * NXP PCF8574 8-port I2C GPIO expansion chip. > + * > + * Copyright (c) 2024 KNS Group (YADRO). > + * Written by Dmitrii Sharikhin <d.sharikhin@yadro.com> > + * > + * This file is licensed under GNU GPL. > + */ > + > +#include "qemu/osdep.h" > +#include "hw/i2c/i2c.h" > +#include "hw/gpio/pcf8574.h" > +#include "hw/irq.h" > +#include "migration/vmstate.h" > +#include "qemu/log.h" > +#include "qemu/module.h" > +#include "qom/object.h" > + > +/** > + * PCF8574 and compatible chips incorporate quasi-bidirectional > + * IO. Electrically it means that device sustain pull-up to line > + * unless IO port is configured as output _and_ driven low. > + * > + * IO access is implemented as simple I2C single-byte read > + * or write operation. So, to configure line to input user write 1 > + * to corresponding bit. To configure line to output and drive it low > + * user write 0 to corresponding bit. > + * > + * In essence, user can think of quasi-bidirectional IO as > + * open-drain line, except presence of builtin rising edge acceleration > + * embedded in PCF8574 IC > + **/ #define PORTS_COUNT 8 > + > +OBJECT_DECLARE_SIMPLE_TYPE(PCF8574State, PCF8574) > + > +struct PCF8574State { > + I2CSlave parent_obj; > + uint8_t input; /* external electrical line state */ > + uint8_t output; /* Pull-up (1) or drive low (0) on bit */ > + qemu_irq handler[8]; s/8/PORTS_COUNT/ > + qemu_irq *gpio_in; There is also a gpio_out, why not implement it? > +}; > + > +static void pcf8574_reset(DeviceState *dev) > +{ > + PCF8574State *s = PCF8574(dev); > + s->input = 0xFF; > + s->output = 0xFF; Alternatively MAKE_64BIT_MASK(0, PORTS_COUNT); > +} > + > +static inline uint8_t pcf8574_line_state(PCF8574State *s) > +{ > + // we driving line low or external circuit does that Comment as /* ... */, see https://www.qemu.org/docs/master/devel/style.html#comment-style > + return s->input & s->output; > +} > + > +static uint8_t pcf8574_rx(I2CSlave *i2c) > +{ > + return pcf8574_line_state(PCF8574(i2c)); > +} > + > +static int pcf8574_tx(I2CSlave *i2c, uint8_t data) > +{ > + PCF8574State *s = PCF8574(i2c); > + uint8_t prev; > + uint8_t diff; > + uint8_t actual; > + int line = 0; > + > + prev = pcf8574_line_state(s); > + s->output = data; > + actual = pcf8574_line_state(s); > + > + for (diff = (actual ^ prev); diff; diff &= ~(1 << line)) No enter before brace. > + { > + line = ctz32(diff); > + if (s->handler[line]) Missing brace, see https://www.qemu.org/docs/master/devel/style.html#block-structure Please run scripts/checkpatch.pl, see https://www.qemu.org/docs/master/devel/submitting-a-patch.html#use-the-qemu-coding-style > + qemu_set_irq(s->handler[line], (actual >> line) & 1); > + } > + > + return 0; > +} > + > +static const VMStateDescription vmstate_pcf8574 = { > + .name = "pcf8574", > + .version_id = 0, > + .minimum_version_id = 0, > + .fields = (VMStateField[]) { > + VMSTATE_UINT8(input, PCF8574State), > + VMSTATE_UINT8(output, PCF8574State), > + VMSTATE_I2C_SLAVE(parent_obj, PCF8574State), > + VMSTATE_END_OF_LIST() > + } > +}; > + > +static void pcf8574_gpio_set(void *opaque, int line, int level) > +{ > + PCF8574State *s = (PCF8574State *) opaque; > + assert(line >= 0 && line < ARRAY_SIZE(s->handler)); > + > + if (level) > + s->input |= (1 << line); > + else > + s->input &= ~(1 << line); > +} > + > +static void pcf8574_realize(DeviceState *dev, Error **errp) > +{ > + PCF8574State *s = PCF8574(dev); > + > + qdev_init_gpio_in(dev, pcf8574_gpio_set, ARRAY_SIZE(s->handler)); > + qdev_init_gpio_out(dev, s->handler, ARRAY_SIZE(s->handler)); > +} > + > +static void pcf8574_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); > + > + k->recv = pcf8574_rx; > + k->send = pcf8574_tx; > + dc->realize = pcf8574_realize; > + dc->reset = pcf8574_reset; > + dc->vmsd = &vmstate_pcf8574; > +} > + > +static const TypeInfo pcf8574_info = { > + .name = TYPE_PCF8574, > + .parent = TYPE_I2C_SLAVE, > + .instance_size = sizeof(PCF8574State), > + .class_init = pcf8574_class_init, > +}; > + > +static void pcf8574_register_types(void) > +{ > + type_register_static(&pcf8574_info); > +} > + > +type_init(pcf8574_register_types) Preferably DEFINE_TYPES() > diff --git a/include/hw/gpio/pcf8574.h b/include/hw/gpio/pcf8574.h > new file mode 100644 > index 0000000000..c690e73487 > --- /dev/null > +++ b/include/hw/gpio/pcf8574.h > @@ -0,0 +1,15 @@ > +/* > + * NXP PCF8574 8-port I2C GPIO expansion chip. > + * > + * Copyright (c) 2024 KNS Group (YADRO). > + * Written by Dmitrii Sharikhin <d.sharikhin@yadro.com> > + * > + * This file is licensed under GNU GPL. Which GPL version? Preferably add an explicit SPDX tag. > + */ > + > +#ifndef _HW_GPIO_PCF8574 > +#define _HW_GPIO_PCF8574 > + > +#define TYPE_PCF8574 "pcf8574" > + > +#endif /* _HW_GPIO_PCF8574 */ Overall LGTM, waiting for v2! Regards, Phil.
diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index d2cf3accc8..bb731ff4ce 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -16,3 +16,7 @@ config GPIO_PWR config SIFIVE_GPIO bool + +config PCF8574 + bool + depends on I2C diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 8a8d03d885..c0d9a3c757 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -15,3 +15,4 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files( )) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) +system_ss.add(when: 'CONFIG_PCF8574', if_true: files('pcf8574.c')) diff --git a/hw/gpio/pcf8574.c b/hw/gpio/pcf8574.c new file mode 100644 index 0000000000..a6c6bd36fa --- /dev/null +++ b/hw/gpio/pcf8574.c @@ -0,0 +1,139 @@ +/* + * NXP PCF8574 8-port I2C GPIO expansion chip. + * + * Copyright (c) 2024 KNS Group (YADRO). + * Written by Dmitrii Sharikhin <d.sharikhin@yadro.com> + * + * This file is licensed under GNU GPL. + */ + +#include "qemu/osdep.h" +#include "hw/i2c/i2c.h" +#include "hw/gpio/pcf8574.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qom/object.h" + +/** + * PCF8574 and compatible chips incorporate quasi-bidirectional + * IO. Electrically it means that device sustain pull-up to line + * unless IO port is configured as output _and_ driven low. + * + * IO access is implemented as simple I2C single-byte read + * or write operation. So, to configure line to input user write 1 + * to corresponding bit. To configure line to output and drive it low + * user write 0 to corresponding bit. + * + * In essence, user can think of quasi-bidirectional IO as + * open-drain line, except presence of builtin rising edge acceleration + * embedded in PCF8574 IC + **/ + +OBJECT_DECLARE_SIMPLE_TYPE(PCF8574State, PCF8574) + +struct PCF8574State { + I2CSlave parent_obj; + uint8_t input; /* external electrical line state */ + uint8_t output; /* Pull-up (1) or drive low (0) on bit */ + qemu_irq handler[8]; + qemu_irq *gpio_in; +}; + +static void pcf8574_reset(DeviceState *dev) +{ + PCF8574State *s = PCF8574(dev); + s->input = 0xFF; + s->output = 0xFF; +} + +static inline uint8_t pcf8574_line_state(PCF8574State *s) +{ + // we driving line low or external circuit does that + return s->input & s->output; +} + +static uint8_t pcf8574_rx(I2CSlave *i2c) +{ + return pcf8574_line_state(PCF8574(i2c)); +} + +static int pcf8574_tx(I2CSlave *i2c, uint8_t data) +{ + PCF8574State *s = PCF8574(i2c); + uint8_t prev; + uint8_t diff; + uint8_t actual; + int line = 0; + + prev = pcf8574_line_state(s); + s->output = data; + actual = pcf8574_line_state(s); + + for (diff = (actual ^ prev); diff; diff &= ~(1 << line)) + { + line = ctz32(diff); + if (s->handler[line]) + qemu_set_irq(s->handler[line], (actual >> line) & 1); + } + + return 0; +} + +static const VMStateDescription vmstate_pcf8574 = { + .name = "pcf8574", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(input, PCF8574State), + VMSTATE_UINT8(output, PCF8574State), + VMSTATE_I2C_SLAVE(parent_obj, PCF8574State), + VMSTATE_END_OF_LIST() + } +}; + +static void pcf8574_gpio_set(void *opaque, int line, int level) +{ + PCF8574State *s = (PCF8574State *) opaque; + assert(line >= 0 && line < ARRAY_SIZE(s->handler)); + + if (level) + s->input |= (1 << line); + else + s->input &= ~(1 << line); +} + +static void pcf8574_realize(DeviceState *dev, Error **errp) +{ + PCF8574State *s = PCF8574(dev); + + qdev_init_gpio_in(dev, pcf8574_gpio_set, ARRAY_SIZE(s->handler)); + qdev_init_gpio_out(dev, s->handler, ARRAY_SIZE(s->handler)); +} + +static void pcf8574_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->recv = pcf8574_rx; + k->send = pcf8574_tx; + dc->realize = pcf8574_realize; + dc->reset = pcf8574_reset; + dc->vmsd = &vmstate_pcf8574; +} + +static const TypeInfo pcf8574_info = { + .name = TYPE_PCF8574, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(PCF8574State), + .class_init = pcf8574_class_init, +}; + +static void pcf8574_register_types(void) +{ + type_register_static(&pcf8574_info); +} + +type_init(pcf8574_register_types) diff --git a/include/hw/gpio/pcf8574.h b/include/hw/gpio/pcf8574.h new file mode 100644 index 0000000000..c690e73487 --- /dev/null +++ b/include/hw/gpio/pcf8574.h @@ -0,0 +1,15 @@ +/* + * NXP PCF8574 8-port I2C GPIO expansion chip. + * + * Copyright (c) 2024 KNS Group (YADRO). + * Written by Dmitrii Sharikhin <d.sharikhin@yadro.com> + * + * This file is licensed under GNU GPL. + */ + +#ifndef _HW_GPIO_PCF8574 +#define _HW_GPIO_PCF8574 + +#define TYPE_PCF8574 "pcf8574" + +#endif /* _HW_GPIO_PCF8574 */
NXP PCF8574 and compatible ICs are simple I2C GPIO expanders. PCF8574 incorporates quasi-bidirectional IO, and simple communication protocol, when IO read is I2C byte read, and IO write is I2C byte write. User can think of it as open-drain port, when line high state is input and line low state is output. This patch allow to instantiate virtual I2C device called "pcf8574" in machine init code via generic mechanism. Signed-off-by: Dmitrii Sharikhin <d.sharikhin@yadro.com> --- hw/gpio/Kconfig | 4 ++ hw/gpio/meson.build | 1 + hw/gpio/pcf8574.c | 139 ++++++++++++++++++++++++++++++++++++++ include/hw/gpio/pcf8574.h | 15 ++++ 4 files changed, 159 insertions(+) create mode 100644 hw/gpio/pcf8574.c create mode 100644 include/hw/gpio/pcf8574.h