new file mode 100644
@@ -0,0 +1,1441 @@
+/*
+ * QEMU UFS Logical Unit
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd. All rights reserved.
+ *
+ * Written by Jeuk Kim <jeuk20.kim@samsung.com>
+ *
+ * This code is licensed under the GNU GPL v2 or later.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "qemu/memalign.h"
+#include "hw/scsi/scsi.h"
+#include "scsi/constants.h"
+#include "sysemu/block-backend.h"
+#include "qemu/cutils.h"
+#include "trace.h"
+#include "ufs.h"
+
+/*
+ * The code below handling SCSI commands is copied from hw/scsi/scsi-disk.c,
+ * with minor adjustments to make it work for UFS.
+ */
+
+#define SCSI_DMA_BUF_SIZE (128 * KiB)
+#define SCSI_MAX_INQUIRY_LEN 256
+#define SCSI_INQUIRY_DATA_SIZE 36
+#define SCSI_MAX_MODE_LEN 256
+
+typedef struct UfsSCSIReq {
+ SCSIRequest req;
+ /* Both sector and sector_count are in terms of BDRV_SECTOR_SIZE bytes. */
+ uint64_t sector;
+ uint32_t sector_count;
+ uint32_t buflen;
+ bool started;
+ bool need_fua_emulation;
+ struct iovec iov;
+ QEMUIOVector qiov;
+ BlockAcctCookie acct;
+} UfsSCSIReq;
+
+static void ufs_scsi_free_request(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+
+ qemu_vfree(r->iov.iov_base);
+}
+
+static void scsi_check_condition(UfsSCSIReq *r, SCSISense sense)
+{
+ trace_ufs_scsi_check_condition(r->req.tag, sense.key, sense.asc,
+ sense.ascq);
+ scsi_req_build_sense(&r->req, sense);
+ scsi_req_complete(&r->req, CHECK_CONDITION);
+}
+
+static int ufs_scsi_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf,
+ uint32_t outbuf_len)
+{
+ UfsHc *u = UFS(req->bus->qbus.parent);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, req->dev);
+ uint8_t page_code = req->cmd.buf[2];
+ int start, buflen = 0;
+
+ if (outbuf_len < SCSI_INQUIRY_DATA_SIZE) {
+ return -1;
+ }
+
+ outbuf[buflen++] = lu->qdev.type & 0x1f;
+ outbuf[buflen++] = page_code;
+ outbuf[buflen++] = 0x00;
+ outbuf[buflen++] = 0x00;
+ start = buflen;
+
+ switch (page_code) {
+ case 0x00: /* Supported page codes, mandatory */
+ {
+ trace_ufs_scsi_emulate_vpd_page_00(req->cmd.xfer);
+ outbuf[buflen++] = 0x00; /* list of supported pages (this page) */
+ if (u->params.serial) {
+ outbuf[buflen++] = 0x80; /* unit serial number */
+ }
+ outbuf[buflen++] = 0x87; /* mode page policy */
+ break;
+ }
+ case 0x80: /* Device serial number, optional */
+ {
+ int l;
+
+ if (!u->params.serial) {
+ trace_ufs_scsi_emulate_vpd_page_80_not_supported();
+ return -1;
+ }
+
+ l = strlen(u->params.serial);
+ if (l > SCSI_INQUIRY_DATA_SIZE) {
+ l = SCSI_INQUIRY_DATA_SIZE;
+ }
+
+ trace_ufs_scsi_emulate_vpd_page_80(req->cmd.xfer);
+ memcpy(outbuf + buflen, u->params.serial, l);
+ buflen += l;
+ break;
+ }
+ case 0x87: /* Mode Page Policy, mandatory */
+ {
+ trace_ufs_scsi_emulate_vpd_page_87(req->cmd.xfer);
+ outbuf[buflen++] = 0x3f; /* apply to all mode pages and subpages */
+ outbuf[buflen++] = 0xff;
+ outbuf[buflen++] = 0; /* shared */
+ outbuf[buflen++] = 0;
+ break;
+ }
+ default:
+ return -1;
+ }
+ /* done with EVPD */
+ assert(buflen - start <= 255);
+ outbuf[start - 1] = buflen - start;
+ return buflen;
+}
+
+static int ufs_scsi_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf,
+ uint32_t outbuf_len)
+{
+ int buflen = 0;
+
+ if (outbuf_len < SCSI_INQUIRY_DATA_SIZE) {
+ return -1;
+ }
+
+ if (req->cmd.buf[1] & 0x1) {
+ /* Vital product data */
+ return ufs_scsi_emulate_vpd_page(req, outbuf, outbuf_len);
+ }
+
+ /* Standard INQUIRY data */
+ if (req->cmd.buf[2] != 0) {
+ return -1;
+ }
+
+ /* PAGE CODE == 0 */
+ buflen = req->cmd.xfer;
+ if (buflen > SCSI_MAX_INQUIRY_LEN) {
+ buflen = SCSI_MAX_INQUIRY_LEN;
+ }
+
+ if (is_wlun(req->lun)) {
+ outbuf[0] = TYPE_WLUN;
+ } else {
+ outbuf[0] = 0;
+ }
+ outbuf[1] = 0;
+
+ strpadcpy((char *)&outbuf[16], 16, "QEMU UFS", ' ');
+ strpadcpy((char *)&outbuf[8], 8, "QEMU", ' ');
+
+ memset(&outbuf[32], 0, 4);
+
+ outbuf[2] = 0x06; /* SPC-4 */
+ outbuf[3] = 0x2;
+
+ if (buflen > SCSI_INQUIRY_DATA_SIZE) {
+ outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */
+ } else {
+ /*
+ * If the allocation length of CDB is too small, the additional
+ * length is not adjusted
+ */
+ outbuf[4] = SCSI_INQUIRY_DATA_SIZE - 5;
+ }
+
+ /* Support TCQ. */
+ outbuf[7] = req->bus->info->tcq ? 0x02 : 0;
+ return buflen;
+}
+
+static int mode_sense_page(UfsLu *lu, int page, uint8_t **p_outbuf,
+ int page_control)
+{
+ static const int mode_sense_valid[0x3f] = {
+ [MODE_PAGE_CACHING] = 1,
+ [MODE_PAGE_R_W_ERROR] = 1,
+ [MODE_PAGE_CONTROL] = 1,
+ };
+
+ uint8_t *p = *p_outbuf + 2;
+ int length;
+
+ assert(page < ARRAY_SIZE(mode_sense_valid));
+ if ((mode_sense_valid[page]) == 0) {
+ return -1;
+ }
+
+ /*
+ * If Changeable Values are requested, a mask denoting those mode parameters
+ * that are changeable shall be returned. As we currently don't support
+ * parameter changes via MODE_SELECT all bits are returned set to zero.
+ * The buffer was already memset to zero by the caller of this function.
+ */
+ switch (page) {
+ case MODE_PAGE_CACHING:
+ length = 0x12;
+ if (page_control == 1 || /* Changeable Values */
+ blk_enable_write_cache(lu->qdev.conf.blk)) {
+ p[0] = 4; /* WCE */
+ }
+ break;
+
+ case MODE_PAGE_R_W_ERROR:
+ length = 10;
+ if (page_control == 1) { /* Changeable Values */
+ break;
+ }
+ p[0] = 0x80; /* Automatic Write Reallocation Enabled */
+ break;
+
+ case MODE_PAGE_CONTROL:
+ length = 10;
+ if (page_control == 1) { /* Changeable Values */
+ break;
+ }
+ p[1] = 0x10; /* Queue Algorithm modifier */
+ p[8] = 0xff; /* Busy Timeout Period */
+ p[9] = 0xff;
+ break;
+
+ default:
+ return -1;
+ }
+
+ assert(length < 256);
+ (*p_outbuf)[0] = page;
+ (*p_outbuf)[1] = length;
+ *p_outbuf += length + 2;
+ return length + 2;
+}
+
+static int ufs_scsi_emulate_mode_sense(UfsSCSIReq *r, uint8_t *outbuf)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ bool dbd;
+ int page, buflen, ret, page_control;
+ uint8_t *p;
+ uint8_t dev_specific_param = 0;
+
+ dbd = (r->req.cmd.buf[1] & 0x8) != 0;
+ if (!dbd) {
+ return -1;
+ }
+
+ page = r->req.cmd.buf[2] & 0x3f;
+ page_control = (r->req.cmd.buf[2] & 0xc0) >> 6;
+
+ trace_ufs_scsi_emulate_mode_sense((r->req.cmd.buf[0] == MODE_SENSE) ? 6 :
+ 10,
+ page, r->req.cmd.xfer, page_control);
+ memset(outbuf, 0, r->req.cmd.xfer);
+ p = outbuf;
+
+ if (!blk_is_writable(lu->qdev.conf.blk)) {
+ dev_specific_param |= 0x80; /* Readonly. */
+ }
+
+ p[2] = 0; /* Medium type. */
+ p[3] = dev_specific_param;
+ p[6] = p[7] = 0; /* Block descriptor length. */
+ p += 8;
+
+ if (page_control == 3) {
+ /* Saved Values */
+ scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED));
+ return -1;
+ }
+
+ if (page == 0x3f) {
+ for (page = 0; page <= 0x3e; page++) {
+ mode_sense_page(lu, page, &p, page_control);
+ }
+ } else {
+ ret = mode_sense_page(lu, page, &p, page_control);
+ if (ret == -1) {
+ return -1;
+ }
+ }
+
+ buflen = p - outbuf;
+ /*
+ * The mode data length field specifies the length in bytes of the
+ * following data that is available to be transferred. The mode data
+ * length does not include itself.
+ */
+ outbuf[0] = ((buflen - 2) >> 8) & 0xff;
+ outbuf[1] = (buflen - 2) & 0xff;
+ return buflen;
+}
+
+/*
+ * scsi_handle_rw_error has two return values. False means that the error
+ * must be ignored, true means that the error has been processed and the
+ * caller should not do anything else for this request. Note that
+ * scsi_handle_rw_error always manages its reference counts, independent
+ * of the return value.
+ */
+static bool scsi_handle_rw_error(UfsSCSIReq *r, int ret, bool acct_failed)
+{
+ bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ SCSISense sense = SENSE_CODE(NO_SENSE);
+ int error = 0;
+ bool req_has_sense = false;
+ BlockErrorAction action;
+ int status;
+
+ if (ret < 0) {
+ status = scsi_sense_from_errno(-ret, &sense);
+ error = -ret;
+ } else {
+ /* A passthrough command has completed with nonzero status. */
+ status = ret;
+ if (status == CHECK_CONDITION) {
+ req_has_sense = true;
+ error = scsi_sense_buf_to_errno(r->req.sense, sizeof(r->req.sense));
+ } else {
+ error = EINVAL;
+ }
+ }
+
+ /*
+ * Check whether the error has to be handled by the guest or should
+ * rather follow the rerror=/werror= settings. Guest-handled errors
+ * are usually retried immediately, so do not post them to QMP and
+ * do not account them as failed I/O.
+ */
+ if (req_has_sense && scsi_sense_buf_is_guest_recoverable(
+ r->req.sense, sizeof(r->req.sense))) {
+ action = BLOCK_ERROR_ACTION_REPORT;
+ acct_failed = false;
+ } else {
+ action = blk_get_error_action(lu->qdev.conf.blk, is_read, error);
+ blk_error_action(lu->qdev.conf.blk, action, is_read, error);
+ }
+
+ switch (action) {
+ case BLOCK_ERROR_ACTION_REPORT:
+ if (acct_failed) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ if (!req_has_sense && status == CHECK_CONDITION) {
+ scsi_req_build_sense(&r->req, sense);
+ }
+ scsi_req_complete(&r->req, status);
+ return true;
+
+ case BLOCK_ERROR_ACTION_IGNORE:
+ return false;
+
+ case BLOCK_ERROR_ACTION_STOP:
+ scsi_req_retry(&r->req);
+ return true;
+
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static bool ufs_scsi_req_check_error(UfsSCSIReq *r, int ret, bool acct_failed)
+{
+ if (r->req.io_canceled) {
+ scsi_req_cancel_complete(&r->req);
+ return true;
+ }
+
+ if (ret < 0) {
+ return scsi_handle_rw_error(r, ret, acct_failed);
+ }
+
+ return false;
+}
+
+static void scsi_aio_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ufs_scsi_req_check_error(r, ret, true)) {
+ goto done;
+ }
+
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ scsi_req_complete(&r->req, GOOD);
+
+done:
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+ scsi_req_unref(&r->req);
+}
+
+static int32_t ufs_scsi_emulate_command(SCSIRequest *req, uint8_t *buf)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, req->dev);
+ uint8_t *outbuf;
+ int buflen;
+
+ switch (req->cmd.buf[0]) {
+ case INQUIRY:
+ case MODE_SENSE_10:
+ case START_STOP:
+ case REQUEST_SENSE:
+ break;
+
+ default:
+ if (!blk_is_available(lu->qdev.conf.blk)) {
+ scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+ return 0;
+ }
+ break;
+ }
+
+ /*
+ * FIXME: we shouldn't return anything bigger than 4k, but the code
+ * requires the buffer to be as big as req->cmd.xfer in several
+ * places. So, do not allow CDBs with a very large ALLOCATION
+ * LENGTH. The real fix would be to modify scsi_read_data and
+ * dma_buf_read, so that they return data beyond the buflen
+ * as all zeros.
+ */
+ if (req->cmd.xfer > 65536) {
+ goto illegal_request;
+ }
+ r->buflen = MAX(4096, req->cmd.xfer);
+
+ if (!r->iov.iov_base) {
+ r->iov.iov_base = blk_blockalign(lu->qdev.conf.blk, r->buflen);
+ }
+
+ outbuf = r->iov.iov_base;
+ memset(outbuf, 0, r->buflen);
+ switch (req->cmd.buf[0]) {
+ case TEST_UNIT_READY:
+ assert(blk_is_available(lu->qdev.conf.blk));
+ break;
+ case INQUIRY:
+ buflen = ufs_scsi_emulate_inquiry(req, outbuf, r->buflen);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case MODE_SENSE_10:
+ buflen = ufs_scsi_emulate_mode_sense(r, outbuf);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case READ_CAPACITY_10:
+ /* The normal LEN field for this command is zero. */
+ memset(outbuf, 0, 8);
+
+ outbuf[0] = (lu->qdev.max_lba >> 24) & 0xff;
+ outbuf[1] = (lu->qdev.max_lba >> 16) & 0xff;
+ outbuf[2] = (lu->qdev.max_lba >> 8) & 0xff;
+ outbuf[3] = lu->qdev.max_lba & 0xff;
+ outbuf[4] = (lu->qdev.blocksize >> 24) & 0xff;
+ outbuf[5] = (lu->qdev.blocksize >> 16) & 0xff;
+ outbuf[6] = (lu->qdev.blocksize >> 8) & 0xff;
+ outbuf[7] = lu->qdev.blocksize & 0xff;
+ break;
+ case REQUEST_SENSE:
+ /* Just return "NO SENSE". */
+ buflen = scsi_convert_sense(NULL, 0, outbuf, r->buflen,
+ (req->cmd.buf[1] & 1) == 0);
+ if (buflen < 0) {
+ goto illegal_request;
+ }
+ break;
+ case SYNCHRONIZE_CACHE:
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_aio_complete, r);
+ return 0;
+ case VERIFY_10:
+ trace_ufs_scsi_emulate_command_VERIFY((req->cmd.buf[1] >> 1) & 3);
+ if (req->cmd.buf[1] & 6) {
+ goto illegal_request;
+ }
+ break;
+ case SERVICE_ACTION_IN_16:
+ /* Service Action In subcommands. */
+ if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
+ trace_ufs_scsi_emulate_command_SAI_16();
+ memset(outbuf, 0, req->cmd.xfer);
+
+ outbuf[0] = (lu->qdev.max_lba >> 56) & 0xff;
+ outbuf[1] = (lu->qdev.max_lba >> 48) & 0xff;
+ outbuf[2] = (lu->qdev.max_lba >> 40) & 0xff;
+ outbuf[3] = (lu->qdev.max_lba >> 32) & 0xff;
+ outbuf[4] = (lu->qdev.max_lba >> 24) & 0xff;
+ outbuf[5] = (lu->qdev.max_lba >> 16) & 0xff;
+ outbuf[6] = (lu->qdev.max_lba >> 8) & 0xff;
+ outbuf[7] = lu->qdev.max_lba & 0xff;
+ outbuf[8] = (lu->qdev.blocksize >> 24) & 0xff;
+ outbuf[9] = (lu->qdev.blocksize >> 16) & 0xff;
+ outbuf[10] = (lu->qdev.blocksize >> 8) & 0xff;
+ outbuf[11] = lu->qdev.blocksize & 0xff;
+ outbuf[12] = 0;
+ outbuf[13] = get_physical_block_exp(&lu->qdev.conf);
+
+ if (lu->unit_desc.provisioning_type == 2 ||
+ lu->unit_desc.provisioning_type == 3) {
+ outbuf[14] = 0x80;
+ }
+ /* Protection, exponent and lowest lba field left blank. */
+ break;
+ }
+ trace_ufs_scsi_emulate_command_SAI_unsupported();
+ goto illegal_request;
+ case MODE_SELECT_10:
+ trace_ufs_scsi_emulate_command_MODE_SELECT_10(r->req.cmd.xfer);
+ break;
+ case START_STOP:
+ /*
+ * TODO: START_STOP is not yet implemented. It always returns success.
+ * Revisit it when ufs power management is implemented.
+ */
+ trace_ufs_scsi_emulate_command_START_STOP();
+ break;
+ case FORMAT_UNIT:
+ trace_ufs_scsi_emulate_command_FORMAT_UNIT();
+ break;
+ case SEND_DIAGNOSTIC:
+ trace_ufs_scsi_emulate_command_SEND_DIAGNOSTIC();
+ break;
+ default:
+ trace_ufs_scsi_emulate_command_UNKNOWN(buf[0],
+ scsi_command_name(buf[0]));
+ scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE));
+ return 0;
+ }
+ assert(!r->req.aiocb);
+ r->iov.iov_len = MIN(r->buflen, req->cmd.xfer);
+ if (r->iov.iov_len == 0) {
+ scsi_req_complete(&r->req, GOOD);
+ }
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ assert(r->iov.iov_len == req->cmd.xfer);
+ return -r->iov.iov_len;
+ } else {
+ return r->iov.iov_len;
+ }
+
+illegal_request:
+ if (r->req.status == -1) {
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+ }
+ return 0;
+}
+
+static void ufs_scsi_emulate_read_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ int buflen = r->iov.iov_len;
+
+ if (buflen) {
+ trace_ufs_scsi_emulate_read_data(buflen);
+ r->iov.iov_len = 0;
+ r->started = true;
+ scsi_req_data(&r->req, buflen);
+ return;
+ }
+
+ /* This also clears the sense buffer for REQUEST SENSE. */
+ scsi_req_complete(&r->req, GOOD);
+}
+
+static int ufs_scsi_check_mode_select(UfsLu *lu, int page, uint8_t *inbuf,
+ int inlen)
+{
+ uint8_t mode_current[SCSI_MAX_MODE_LEN];
+ uint8_t mode_changeable[SCSI_MAX_MODE_LEN];
+ uint8_t *p;
+ int len, expected_len, changeable_len, i;
+
+ /*
+ * The input buffer does not include the page header, so it is
+ * off by 2 bytes.
+ */
+ expected_len = inlen + 2;
+ if (expected_len > SCSI_MAX_MODE_LEN) {
+ return -1;
+ }
+
+ /* MODE_PAGE_ALLS is only valid for MODE SENSE commands */
+ if (page == MODE_PAGE_ALLS) {
+ return -1;
+ }
+
+ p = mode_current;
+ memset(mode_current, 0, inlen + 2);
+ len = mode_sense_page(lu, page, &p, 0);
+ if (len < 0 || len != expected_len) {
+ return -1;
+ }
+
+ p = mode_changeable;
+ memset(mode_changeable, 0, inlen + 2);
+ changeable_len = mode_sense_page(lu, page, &p, 1);
+ assert(changeable_len == len);
+
+ /*
+ * Check that unchangeable bits are the same as what MODE SENSE
+ * would return.
+ */
+ for (i = 2; i < len; i++) {
+ if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static void ufs_scsi_apply_mode_select(UfsLu *lu, int page, uint8_t *p)
+{
+ switch (page) {
+ case MODE_PAGE_CACHING:
+ blk_set_enable_write_cache(lu->qdev.conf.blk, (p[0] & 4) != 0);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int mode_select_pages(UfsSCSIReq *r, uint8_t *p, int len, bool change)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ while (len > 0) {
+ int page, page_len;
+
+ page = p[0] & 0x3f;
+ if (p[0] & 0x40) {
+ goto invalid_param;
+ } else {
+ if (len < 2) {
+ goto invalid_param_len;
+ }
+ page_len = p[1];
+ p += 2;
+ len -= 2;
+ }
+
+ if (page_len > len) {
+ goto invalid_param_len;
+ }
+
+ if (!change) {
+ if (ufs_scsi_check_mode_select(lu, page, p, page_len) < 0) {
+ goto invalid_param;
+ }
+ } else {
+ ufs_scsi_apply_mode_select(lu, page, p);
+ }
+
+ p += page_len;
+ len -= page_len;
+ }
+ return 0;
+
+invalid_param:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
+ return -1;
+
+invalid_param_len:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
+ return -1;
+}
+
+static void ufs_scsi_emulate_mode_select(UfsSCSIReq *r, uint8_t *inbuf)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ uint8_t *p = inbuf;
+ int len = r->req.cmd.xfer;
+ int hdr_len = 8;
+ int bd_len;
+ int pass;
+
+ /* We only support PF=1, SP=0. */
+ if ((r->req.cmd.buf[1] & 0x11) != 0x10) {
+ goto invalid_field;
+ }
+
+ if (len < hdr_len) {
+ goto invalid_param_len;
+ }
+
+ bd_len = lduw_be_p(&p[6]);
+ if (bd_len != 0) {
+ goto invalid_param;
+ }
+
+ len -= hdr_len;
+ p += hdr_len;
+
+ /* Ensure no change is made if there is an error! */
+ for (pass = 0; pass < 2; pass++) {
+ if (mode_select_pages(r, p, len, pass == 1) < 0) {
+ assert(pass == 0);
+ return;
+ }
+ }
+
+ if (!blk_enable_write_cache(lu->qdev.conf.blk)) {
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_aio_complete, r);
+ return;
+ }
+
+ scsi_req_complete(&r->req, GOOD);
+ return;
+
+invalid_param:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM));
+ return;
+
+invalid_param_len:
+ scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN));
+ return;
+
+invalid_field:
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+}
+
+/* sector_num and nb_sectors expected to be in qdev blocksize */
+static inline bool check_lba_range(UfsLu *lu, uint64_t sector_num,
+ uint32_t nb_sectors)
+{
+ /*
+ * The first line tests that no overflow happens when computing the last
+ * sector. The second line tests that the last accessed sector is in
+ * range.
+ *
+ * Careful, the computations should not underflow for nb_sectors == 0,
+ * and a 0-block read to the first LBA beyond the end of device is
+ * valid.
+ */
+ return (sector_num <= sector_num + nb_sectors &&
+ sector_num + nb_sectors <= lu->qdev.max_lba + 1);
+}
+
+static void ufs_scsi_emulate_write_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+
+ if (r->iov.iov_len) {
+ int buflen = r->iov.iov_len;
+ trace_ufs_scsi_emulate_write_data(buflen);
+ r->iov.iov_len = 0;
+ scsi_req_data(&r->req, buflen);
+ return;
+ }
+
+ switch (req->cmd.buf[0]) {
+ case MODE_SELECT_10:
+ /* This also clears the sense buffer for REQUEST SENSE. */
+ ufs_scsi_emulate_mode_select(r, r->iov.iov_base);
+ break;
+ default:
+ abort();
+ }
+}
+
+/* Return a pointer to the data buffer. */
+static uint8_t *ufs_scsi_get_buf(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+
+ return (uint8_t *)r->iov.iov_base;
+}
+
+static int32_t ufs_scsi_dma_command(SCSIRequest *req, uint8_t *buf)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, req->dev);
+ uint32_t len;
+ uint8_t command;
+
+ command = buf[0];
+
+ if (!blk_is_available(lu->qdev.conf.blk)) {
+ scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+ return 0;
+ }
+
+ len = scsi_data_cdb_xfer(r->req.cmd.buf);
+ switch (command) {
+ case READ_6:
+ case READ_10:
+ trace_ufs_scsi_dma_command_READ(r->req.cmd.lba, len);
+ if (r->req.cmd.buf[1] & 0xe0) {
+ goto illegal_request;
+ }
+ if (!check_lba_range(lu, r->req.cmd.lba, len)) {
+ goto illegal_lba;
+ }
+ r->sector = r->req.cmd.lba * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ r->sector_count = len * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ break;
+ case WRITE_6:
+ case WRITE_10:
+ trace_ufs_scsi_dma_command_WRITE(r->req.cmd.lba, len);
+ if (!blk_is_writable(lu->qdev.conf.blk)) {
+ scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
+ return 0;
+ }
+ if (r->req.cmd.buf[1] & 0xe0) {
+ goto illegal_request;
+ }
+ if (!check_lba_range(lu, r->req.cmd.lba, len)) {
+ goto illegal_lba;
+ }
+ r->sector = r->req.cmd.lba * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ r->sector_count = len * (lu->qdev.blocksize / BDRV_SECTOR_SIZE);
+ break;
+ default:
+ abort();
+ illegal_request:
+ scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+ return 0;
+ illegal_lba:
+ scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE));
+ return 0;
+ }
+ r->need_fua_emulation = ((r->req.cmd.buf[1] & 8) != 0);
+ if (r->sector_count == 0) {
+ scsi_req_complete(&r->req, GOOD);
+ }
+ assert(r->iov.iov_len == 0);
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ return -r->sector_count * BDRV_SECTOR_SIZE;
+ } else {
+ return r->sector_count * BDRV_SECTOR_SIZE;
+ }
+}
+
+static void scsi_write_do_fua(UfsSCSIReq *r)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb == NULL);
+ assert(!r->req.io_canceled);
+
+ if (r->need_fua_emulation) {
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_aio_complete, r);
+ return;
+ }
+
+ scsi_req_complete(&r->req, GOOD);
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_dma_complete_noio(UfsSCSIReq *r, int ret)
+{
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ r->sector += r->sector_count;
+ r->sector_count = 0;
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ scsi_write_do_fua(r);
+ return;
+ } else {
+ scsi_req_complete(&r->req, GOOD);
+ }
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_dma_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ scsi_dma_complete_noio(r, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+static BlockAIOCB *scsi_dma_readv(int64_t offset, QEMUIOVector *iov,
+ BlockCompletionFunc *cb, void *cb_opaque,
+ void *opaque)
+{
+ UfsSCSIReq *r = opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ return blk_aio_preadv(lu->qdev.conf.blk, offset, iov, 0, cb, cb_opaque);
+}
+
+static void scsi_init_iovec(UfsSCSIReq *r, size_t size)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ if (!r->iov.iov_base) {
+ r->buflen = size;
+ r->iov.iov_base = blk_blockalign(lu->qdev.conf.blk, r->buflen);
+ }
+ r->iov.iov_len = MIN(r->sector_count * BDRV_SECTOR_SIZE, r->buflen);
+ qemu_iovec_init_external(&r->qiov, &r->iov, 1);
+}
+
+static void scsi_read_complete_noio(UfsSCSIReq *r, int ret)
+{
+ uint32_t n;
+
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ n = r->qiov.size / BDRV_SECTOR_SIZE;
+ r->sector += n;
+ r->sector_count -= n;
+ scsi_req_data(&r->req, r->qiov.size);
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_read_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+ trace_ufs_scsi_read_data_count(r->sector_count);
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ trace_ufs_scsi_read_complete(r->req.tag, r->qiov.size);
+ }
+ scsi_read_complete_noio(r, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+/* Actually issue a read to the block device. */
+static void scsi_do_read(UfsSCSIReq *r, int ret)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+
+ if (r->req.sg) {
+ dma_acct_start(lu->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_READ);
+ r->req.residual -= r->req.sg->size;
+ r->req.aiocb = dma_blk_io(
+ blk_get_aio_context(lu->qdev.conf.blk), r->req.sg,
+ r->sector << BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE, scsi_dma_readv, r,
+ scsi_dma_complete, r, DMA_DIRECTION_FROM_DEVICE);
+ } else {
+ scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct,
+ r->qiov.size, BLOCK_ACCT_READ);
+ r->req.aiocb = scsi_dma_readv(r->sector << BDRV_SECTOR_BITS, &r->qiov,
+ scsi_read_complete, r, r);
+ }
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_do_read_cb(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ scsi_do_read(opaque, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+/* Read more data from scsi device into buffer. */
+static void scsi_read_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ bool first;
+
+ trace_ufs_scsi_read_data_count(r->sector_count);
+ if (r->sector_count == 0) {
+ /* This also clears the sense buffer for REQUEST SENSE. */
+ scsi_req_complete(&r->req, GOOD);
+ return;
+ }
+
+ /* No data transfer may already be in progress */
+ assert(r->req.aiocb == NULL);
+
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ trace_ufs_scsi_read_data_invalid();
+ scsi_read_complete_noio(r, -EINVAL);
+ return;
+ }
+
+ if (!blk_is_available(req->dev->conf.blk)) {
+ scsi_read_complete_noio(r, -ENOMEDIUM);
+ return;
+ }
+
+ first = !r->started;
+ r->started = true;
+ if (first && r->need_fua_emulation) {
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct, 0,
+ BLOCK_ACCT_FLUSH);
+ r->req.aiocb = blk_aio_flush(lu->qdev.conf.blk, scsi_do_read_cb, r);
+ } else {
+ scsi_do_read(r, 0);
+ }
+}
+
+static void scsi_write_complete_noio(UfsSCSIReq *r, int ret)
+{
+ uint32_t n;
+
+ assert(r->req.aiocb == NULL);
+ if (ufs_scsi_req_check_error(r, ret, false)) {
+ goto done;
+ }
+
+ n = r->qiov.size / BDRV_SECTOR_SIZE;
+ r->sector += n;
+ r->sector_count -= n;
+ if (r->sector_count == 0) {
+ scsi_write_do_fua(r);
+ return;
+ } else {
+ scsi_init_iovec(r, SCSI_DMA_BUF_SIZE);
+ trace_ufs_scsi_write_complete_noio(r->req.tag, r->qiov.size);
+ scsi_req_data(&r->req, r->qiov.size);
+ }
+
+done:
+ scsi_req_unref(&r->req);
+}
+
+static void scsi_write_complete(void *opaque, int ret)
+{
+ UfsSCSIReq *r = (UfsSCSIReq *)opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ assert(r->req.aiocb != NULL);
+ r->req.aiocb = NULL;
+
+ aio_context_acquire(blk_get_aio_context(lu->qdev.conf.blk));
+ if (ret < 0) {
+ block_acct_failed(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ } else {
+ block_acct_done(blk_get_stats(lu->qdev.conf.blk), &r->acct);
+ }
+ scsi_write_complete_noio(r, ret);
+ aio_context_release(blk_get_aio_context(lu->qdev.conf.blk));
+}
+
+static BlockAIOCB *scsi_dma_writev(int64_t offset, QEMUIOVector *iov,
+ BlockCompletionFunc *cb, void *cb_opaque,
+ void *opaque)
+{
+ UfsSCSIReq *r = opaque;
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+ return blk_aio_pwritev(lu->qdev.conf.blk, offset, iov, 0, cb, cb_opaque);
+}
+
+static void scsi_write_data(SCSIRequest *req)
+{
+ UfsSCSIReq *r = DO_UPCAST(UfsSCSIReq, req, req);
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, r->req.dev);
+
+ /* No data transfer may already be in progress */
+ assert(r->req.aiocb == NULL);
+
+ /* The request is used as the AIO opaque value, so add a ref. */
+ scsi_req_ref(&r->req);
+ if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
+ trace_ufs_scsi_write_data_invalid();
+ scsi_write_complete_noio(r, -EINVAL);
+ return;
+ }
+
+ if (!r->req.sg && !r->qiov.size) {
+ /* Called for the first time. Ask the driver to send us more data. */
+ r->started = true;
+ scsi_write_complete_noio(r, 0);
+ return;
+ }
+ if (!blk_is_available(req->dev->conf.blk)) {
+ scsi_write_complete_noio(r, -ENOMEDIUM);
+ return;
+ }
+
+ if (r->req.sg) {
+ dma_acct_start(lu->qdev.conf.blk, &r->acct, r->req.sg,
+ BLOCK_ACCT_WRITE);
+ r->req.residual -= r->req.sg->size;
+ r->req.aiocb = dma_blk_io(
+ blk_get_aio_context(lu->qdev.conf.blk), r->req.sg,
+ r->sector << BDRV_SECTOR_BITS, BDRV_SECTOR_SIZE, scsi_dma_writev, r,
+ scsi_dma_complete, r, DMA_DIRECTION_TO_DEVICE);
+ } else {
+ block_acct_start(blk_get_stats(lu->qdev.conf.blk), &r->acct,
+ r->qiov.size, BLOCK_ACCT_WRITE);
+ r->req.aiocb = scsi_dma_writev(r->sector << BDRV_SECTOR_BITS, &r->qiov,
+ scsi_write_complete, r, r);
+ }
+}
+
+static const SCSIReqOps ufs_scsi_emulate_reqops = {
+ .size = sizeof(UfsSCSIReq),
+ .free_req = ufs_scsi_free_request,
+ .send_command = ufs_scsi_emulate_command,
+ .read_data = ufs_scsi_emulate_read_data,
+ .write_data = ufs_scsi_emulate_write_data,
+ .get_buf = ufs_scsi_get_buf,
+};
+
+static const SCSIReqOps ufs_scsi_dma_reqops = {
+ .size = sizeof(UfsSCSIReq),
+ .free_req = ufs_scsi_free_request,
+ .send_command = ufs_scsi_dma_command,
+ .read_data = scsi_read_data,
+ .write_data = scsi_write_data,
+ .get_buf = ufs_scsi_get_buf,
+};
+
+/*
+ * Following commands are not yet supported
+ * PRE_FETCH(10),
+ * UNMAP,
+ * WRITE_BUFFER, READ_BUFFER,
+ * SECURITY_PROTOCOL_IN, SECURITY_PROTOCOL_OUT
+ */
+static const SCSIReqOps *const ufs_scsi_reqops_dispatch[256] = {
+ [TEST_UNIT_READY] = &ufs_scsi_emulate_reqops,
+ [INQUIRY] = &ufs_scsi_emulate_reqops,
+ [MODE_SENSE_10] = &ufs_scsi_emulate_reqops,
+ [START_STOP] = &ufs_scsi_emulate_reqops,
+ [READ_CAPACITY_10] = &ufs_scsi_emulate_reqops,
+ [REQUEST_SENSE] = &ufs_scsi_emulate_reqops,
+ [SYNCHRONIZE_CACHE] = &ufs_scsi_emulate_reqops,
+ [MODE_SELECT_10] = &ufs_scsi_emulate_reqops,
+ [VERIFY_10] = &ufs_scsi_emulate_reqops,
+ [FORMAT_UNIT] = &ufs_scsi_emulate_reqops,
+ [SERVICE_ACTION_IN_16] = &ufs_scsi_emulate_reqops,
+ [SEND_DIAGNOSTIC] = &ufs_scsi_emulate_reqops,
+
+ [READ_6] = &ufs_scsi_dma_reqops,
+ [READ_10] = &ufs_scsi_dma_reqops,
+ [WRITE_6] = &ufs_scsi_dma_reqops,
+ [WRITE_10] = &ufs_scsi_dma_reqops,
+};
+
+static SCSIRequest *scsi_new_request(SCSIDevice *dev, uint32_t tag,
+ uint32_t lun, uint8_t *buf,
+ void *hba_private)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, dev);
+ SCSIRequest *req;
+ const SCSIReqOps *ops;
+ uint8_t command;
+
+ command = buf[0];
+ ops = ufs_scsi_reqops_dispatch[command];
+ if (!ops) {
+ ops = &ufs_scsi_emulate_reqops;
+ }
+ req = scsi_req_alloc(ops, &lu->qdev, tag, lun, hba_private);
+
+ return req;
+}
+
+static Property ufs_lu_props[] = {
+ DEFINE_PROP_DRIVE_IOTHREAD("drive", UfsLu, qdev.conf.blk),
+ DEFINE_BLOCK_PROPERTIES_BASE(UfsLu, qdev.conf),
+ DEFINE_BLOCK_ERROR_PROPERTIES(UfsLu, qdev.conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static bool ufs_lu_brdv_init(UfsLu *lu, Error **errp)
+{
+ SCSIDevice *dev = &lu->qdev;
+ bool read_only;
+
+ if (!lu->qdev.conf.blk) {
+ error_setg(errp, "drive property not set");
+ return false;
+ }
+
+ if (!blkconf_blocksizes(&lu->qdev.conf, errp)) {
+ return false;
+ }
+
+ if (blk_get_aio_context(lu->qdev.conf.blk) != qemu_get_aio_context() &&
+ !lu->qdev.hba_supports_iothread) {
+ error_setg(errp, "HBA does not support iothreads");
+ return false;
+ }
+
+ read_only = !blk_supports_write_perm(lu->qdev.conf.blk);
+
+ if (!blkconf_apply_backend_options(&dev->conf, read_only,
+ dev->type == TYPE_DISK, errp)) {
+ return false;
+ }
+
+ if (blk_is_sg(lu->qdev.conf.blk)) {
+ error_setg(errp, "unwanted /dev/sg*");
+ return false;
+ }
+
+ blk_iostatus_enable(lu->qdev.conf.blk);
+ return true;
+}
+
+static bool ufs_add_lu(UfsHc *u, UfsLu *lu, Error **errp)
+{
+ BlockBackend *blk = lu->qdev.conf.blk;
+ int64_t brdv_len = blk_getlength(blk);
+ uint64_t raw_dev_cap =
+ be64_to_cpu(u->geometry_desc.total_raw_device_capacity);
+
+ if (u->device_desc.number_lu >= UFS_MAX_LUS) {
+ error_setg(errp, "ufs host controller has too many logical units.");
+ return false;
+ }
+
+ if (u->lus[lu->lun] != NULL) {
+ error_setg(errp, "ufs logical unit %d already exists.", lu->lun);
+ return false;
+ }
+
+ u->lus[lu->lun] = lu;
+ u->device_desc.number_lu++;
+ raw_dev_cap += (brdv_len >> UFS_GEOMETRY_CAPACITY_SHIFT);
+ u->geometry_desc.total_raw_device_capacity = cpu_to_be64(raw_dev_cap);
+ return true;
+}
+
+static inline uint8_t ufs_log2(uint64_t input)
+{
+ int log = 1;
+ while (input >> log) {
+ log++;
+ }
+ return log;
+}
+
+static void ufs_init_lu(UfsLu *lu)
+{
+ BlockBackend *blk = lu->qdev.conf.blk;
+ int64_t brdv_len = blk_getlength(blk);
+
+ lu->lun = lu->qdev.lun;
+ memset(&lu->unit_desc, 0, sizeof(lu->unit_desc));
+ lu->unit_desc.length = sizeof(UnitDescriptor);
+ lu->unit_desc.descriptor_idn = QUERY_DESC_IDN_UNIT;
+ lu->unit_desc.lu_enable = 0x01;
+ lu->unit_desc.logical_block_size = ufs_log2(lu->qdev.blocksize);
+ lu->unit_desc.unit_index = lu->qdev.lun;
+ lu->unit_desc.logical_block_count =
+ cpu_to_be64(brdv_len / (1 << lu->unit_desc.logical_block_size));
+}
+
+static bool ufs_lu_check_constraints(UfsLu *lu, Error **errp)
+{
+ if (!blk_is_available(lu->qdev.conf.blk)) {
+ error_setg(errp, "block backend not configured");
+ return false;
+ }
+
+ if (lu->qdev.channel != 0) {
+ error_setg(errp, "ufs logical unit does not support channel");
+ return false;
+ }
+
+ if (lu->qdev.lun >= UFS_MAX_LUS) {
+ error_setg(errp, "lun must be between 1 and %d", UFS_MAX_LUS - 1);
+ return false;
+ }
+
+ return true;
+}
+
+static void ufs_lu_realize(SCSIDevice *dev, Error **errp)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, dev);
+ BusState *s = qdev_get_parent_bus(&dev->qdev);
+ UfsHc *u = UFS(s->parent);
+ AioContext *ctx = NULL;
+ uint64_t nb_sectors, nb_blocks;
+
+ if (!ufs_lu_check_constraints(lu, errp)) {
+ return;
+ }
+
+ if (lu->qdev.conf.blk) {
+ ctx = blk_get_aio_context(lu->qdev.conf.blk);
+ aio_context_acquire(ctx);
+ if (!blkconf_blocksizes(&lu->qdev.conf, errp)) {
+ goto out;
+ }
+ }
+ lu->qdev.blocksize = lu->qdev.conf.logical_block_size;
+ blk_get_geometry(lu->qdev.conf.blk, &nb_sectors);
+ nb_blocks = nb_sectors / (lu->qdev.blocksize / BDRV_SECTOR_SIZE) - 1;
+ if (nb_blocks > UINT32_MAX) {
+ nb_blocks = UINT32_MAX;
+ }
+ lu->qdev.max_lba = nb_blocks;
+ lu->qdev.type = TYPE_DISK;
+
+ ufs_init_lu(lu);
+ if (!ufs_add_lu(u, lu, errp)) {
+ goto out;
+ }
+
+ ufs_lu_brdv_init(lu, errp);
+out:
+ if (ctx) {
+ aio_context_release(ctx);
+ }
+}
+
+static void ufs_lu_unrealize(SCSIDevice *dev)
+{
+ UfsLu *lu = DO_UPCAST(UfsLu, qdev, dev);
+
+ blk_drain(lu->qdev.conf.blk);
+}
+
+static void ufs_wlu_realize(DeviceState *qdev, Error **errp)
+{
+ UfsWLu *wlu = UFSWLU(qdev);
+ SCSIDevice *dev = &wlu->qdev;
+
+ if (!is_wlun(dev->lun)) {
+ error_setg(errp, "not well-known logical unit number");
+ return;
+ }
+
+ QTAILQ_INIT(&dev->requests);
+}
+
+static void ufs_lu_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(oc);
+
+ sc->realize = ufs_lu_realize;
+ sc->unrealize = ufs_lu_unrealize;
+ sc->alloc_req = scsi_new_request;
+ dc->bus_type = TYPE_UFS_BUS;
+ device_class_set_props(dc, ufs_lu_props);
+ dc->desc = "Virtual UFS logical unit";
+}
+
+static void ufs_wlu_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(oc);
+
+ /*
+ * The realize() function of TYPE_SCSI_DEVICE causes a segmentation fault
+ * if a block drive does not exist. Define a new realize function for
+ * well-known LUs that do not have a block drive.
+ */
+ dc->realize = ufs_wlu_realize;
+ sc->alloc_req = scsi_new_request;
+ dc->bus_type = TYPE_UFS_BUS;
+ dc->desc = "Virtual UFS well-known logical unit";
+}
+
+static const TypeInfo ufs_lu_info = {
+ .name = TYPE_UFS_LU,
+ .parent = TYPE_SCSI_DEVICE,
+ .class_init = ufs_lu_class_init,
+ .instance_size = sizeof(UfsLu),
+};
+
+static const TypeInfo ufs_wlu_info = {
+ .name = TYPE_UFS_WLU,
+ .parent = TYPE_SCSI_DEVICE,
+ .class_init = ufs_wlu_class_init,
+ .instance_size = sizeof(UfsWLu),
+};
+
+static void ufs_lu_register_types(void)
+{
+ type_register_static(&ufs_lu_info);
+ type_register_static(&ufs_wlu_info);
+}
+
+type_init(ufs_lu_register_types)
@@ -1 +1 @@
-system_ss.add(when: 'CONFIG_UFS_PCI', if_true: files('ufs.c'))
+system_ss.add(when: 'CONFIG_UFS_PCI', if_true: files('ufs.c', 'lu.c'))
@@ -12,6 +12,31 @@ ufs_exec_scsi_cmd(uint32_t slot, uint8_t lun, uint8_t opcode) "slot %"PRIu32", l
ufs_exec_query_cmd(uint32_t slot, uint8_t opcode) "slot %"PRIu32", opcode 0x%"PRIx8""
ufs_process_uiccmd(uint32_t uiccmd, uint32_t ucmdarg1, uint32_t ucmdarg2, uint32_t ucmdarg3) "uiccmd 0x%"PRIx32", ucmdarg1 0x%"PRIx32", ucmdarg2 0x%"PRIx32", ucmdarg3 0x%"PRIx32""
+# lu.c
+ufs_scsi_check_condition(uint32_t tag, uint8_t key, uint8_t asc, uint8_t ascq) "Command complete tag=0x%x sense=%d/%d/%d"
+ufs_scsi_read_complete(uint32_t tag, size_t size) "Data ready tag=0x%x len=%zd"
+ufs_scsi_read_data_count(uint32_t sector_count) "Read sector_count=%d"
+ufs_scsi_read_data_invalid(void) "Data transfer direction invalid"
+ufs_scsi_write_complete_noio(uint32_t tag, size_t size) "Write complete tag=0x%x more=%zd"
+ufs_scsi_write_data_invalid(void) "Data transfer direction invalid"
+ufs_scsi_emulate_vpd_page_00(size_t xfer) "Inquiry EVPD[Supported pages] buffer size %zd"
+ufs_scsi_emulate_vpd_page_80_not_supported(void) "Inquiry EVPD[Serial number] not supported"
+ufs_scsi_emulate_vpd_page_80(size_t xfer) "Inquiry EVPD[Serial number] buffer size %zd"
+ufs_scsi_emulate_vpd_page_87(size_t xfer) "Inquiry EVPD[Mode Page Policy] buffer size %zd"
+ufs_scsi_emulate_mode_sense(int cmd, int page, size_t xfer, int control) "Mode Sense(%d) (page %d, xfer %zd, page_control %d)"
+ufs_scsi_emulate_read_data(int buflen) "Read buf_len=%d"
+ufs_scsi_emulate_write_data(int buflen) "Write buf_len=%d"
+ufs_scsi_emulate_command_START_STOP(void) "START STOP UNIT"
+ufs_scsi_emulate_command_FORMAT_UNIT(void) "FORMAT UNIT"
+ufs_scsi_emulate_command_SEND_DIAGNOSTIC(void) "SEND DIAGNOSTIC"
+ufs_scsi_emulate_command_SAI_16(void) "SAI READ CAPACITY(16)"
+ufs_scsi_emulate_command_SAI_unsupported(void) "Unsupported Service Action In"
+ufs_scsi_emulate_command_MODE_SELECT_10(size_t xfer) "Mode Select(10) (len %zd)"
+ufs_scsi_emulate_command_VERIFY(int bytchk) "Verify (bytchk %d)"
+ufs_scsi_emulate_command_UNKNOWN(int cmd, const char *name) "Unknown SCSI command (0x%2.2x=%s)"
+ufs_scsi_dma_command_READ(uint64_t lba, uint32_t len) "Read (block %" PRIu64 ", count %u)"
+ufs_scsi_dma_command_WRITE(uint64_t lba, int len) "Write (block %" PRIu64 ", count %u)"
+
# error condition
ufs_err_memory_allocation(void) "failed to allocate memory"
ufs_err_dma_read_utrd(uint32_t slot, uint64_t addr) "failed to read utrd. UTRLDBR slot %"PRIu32", UTRD dma addr %"PRIu64""
@@ -8,6 +8,19 @@
* SPDX-License-Identifier: GPL-2.0-or-later
*/
+/**
+ * Reference Specs: https://www.jedec.org/, 3.1
+ *
+ * Usage
+ * -----
+ *
+ * Add options:
+ * -drive file=<file>,if=none,id=<drive_id>
+ * -device ufs,serial=<serial>,id=<bus_name>, \
+ * nutrs=<N[optional]>,nutmrs=<N[optional]>
+ * -device ufs-lu,drive=<drive_id>,bus=<bus_name>
+ */
+
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "migration/vmstate.h"
@@ -461,6 +474,19 @@ static const MemoryRegionOps ufs_mmio_ops = {
},
};
+static QEMUSGList *ufs_get_sg_list(SCSIRequest *scsi_req)
+{
+ UfsRequest *req = scsi_req->hba_private;
+ return req->sg;
+}
+
+static void ufs_build_upiu_sense_data(UfsRequest *req, SCSIRequest *scsi_req)
+{
+ req->rsp_upiu.sr.sense_data_len = cpu_to_be16(scsi_req->sense_len);
+ assert(scsi_req->sense_len <= SCSI_SENSE_LEN);
+ memcpy(req->rsp_upiu.sr.sense_data, scsi_req->sense, scsi_req->sense_len);
+}
+
static void ufs_build_upiu_header(UfsRequest *req, uint8_t trans_type,
uint8_t flags, uint8_t response,
uint8_t scsi_status,
@@ -474,6 +500,98 @@ static void ufs_build_upiu_header(UfsRequest *req, uint8_t trans_type,
req->rsp_upiu.header.data_segment_length = cpu_to_be16(data_segment_length);
}
+static void ufs_scsi_command_complete(SCSIRequest *scsi_req, size_t resid)
+{
+ UfsRequest *req = scsi_req->hba_private;
+ int16_t status = scsi_req->status;
+ uint32_t expected_len = be32_to_cpu(req->req_upiu.sc.exp_data_transfer_len);
+ uint32_t transfered_len = scsi_req->cmd.xfer - resid;
+ uint8_t flags = 0, response = COMMAND_RESULT_SUCESS;
+ uint16_t data_segment_length;
+
+ if (expected_len > transfered_len) {
+ req->rsp_upiu.sr.residual_transfer_count =
+ cpu_to_be32(expected_len - transfered_len);
+ flags |= UFS_UPIU_FLAG_UNDERFLOW;
+ } else if (expected_len < transfered_len) {
+ req->rsp_upiu.sr.residual_transfer_count =
+ cpu_to_be32(transfered_len - expected_len);
+ flags |= UFS_UPIU_FLAG_OVERFLOW;
+ }
+
+ if (status != 0) {
+ ufs_build_upiu_sense_data(req, scsi_req);
+ response = COMMAND_RESULT_FAIL;
+ }
+
+ data_segment_length = cpu_to_be16(scsi_req->sense_len +
+ sizeof(req->rsp_upiu.sr.sense_data_len));
+ ufs_build_upiu_header(req, UPIU_TRANSACTION_RESPONSE, flags, response,
+ status, data_segment_length);
+
+ ufs_complete_req(req, UFS_REQUEST_SUCCESS);
+
+ scsi_req->hba_private = NULL;
+ scsi_req_unref(scsi_req);
+}
+
+static const struct SCSIBusInfo ufs_scsi_info = {
+ .tcq = true,
+ .max_target = 0,
+ .max_lun = UFS_MAX_LUS,
+ .max_channel = 0,
+
+ .get_sg_list = ufs_get_sg_list,
+ .complete = ufs_scsi_command_complete,
+};
+
+static UfsReqResult ufs_exec_scsi_cmd(UfsRequest *req)
+{
+ UfsHc *u = req->hc;
+ uint8_t lun = req->req_upiu.header.lun;
+ uint8_t task_tag = req->req_upiu.header.task_tag;
+ SCSIDevice *dev = NULL;
+
+ trace_ufs_exec_scsi_cmd(req->slot, lun, req->req_upiu.sc.cdb[0]);
+
+ if (!is_wlun(lun)) {
+ if (lun >= u->device_desc.number_lu) {
+ trace_ufs_err_scsi_cmd_invalid_lun(lun);
+ return UFS_REQUEST_ERROR;
+ } else if (u->lus[lun] == NULL) {
+ trace_ufs_err_scsi_cmd_invalid_lun(lun);
+ return UFS_REQUEST_ERROR;
+ }
+ }
+
+ switch (lun) {
+ case UFS_UPIU_REPORT_LUNS_WLUN:
+ dev = &u->report_wlu->qdev;
+ break;
+ case UFS_UPIU_UFS_DEVICE_WLUN:
+ dev = &u->dev_wlu->qdev;
+ break;
+ case UFS_UPIU_BOOT_WLUN:
+ dev = &u->boot_wlu->qdev;
+ break;
+ case UFS_UPIU_RPMB_WLUN:
+ dev = &u->rpmb_wlu->qdev;
+ break;
+ default:
+ dev = &u->lus[lun]->qdev;
+ }
+
+ SCSIRequest *scsi_req = scsi_req_new(
+ dev, task_tag, lun, req->req_upiu.sc.cdb, UFS_CDB_SIZE, req);
+
+ uint32_t len = scsi_req_enqueue(scsi_req);
+ if (len) {
+ scsi_req_continue(scsi_req);
+ }
+
+ return UFS_REQUEST_NO_COMPLETE;
+}
+
static UfsReqResult ufs_exec_nop_cmd(UfsRequest *req)
{
trace_ufs_exec_nop_cmd(req->slot);
@@ -751,9 +869,11 @@ static const RpmbUnitDescriptor rpmb_unit_desc = {
static QueryRespCode ufs_read_unit_desc(UfsRequest *req)
{
+ UfsHc *u = req->hc;
uint8_t lun = req->req_upiu.qr.index;
- if (lun != UFS_UPIU_RPMB_WLUN && lun > UFS_MAX_LUS) {
+ if (lun != UFS_UPIU_RPMB_WLUN &&
+ (lun > UFS_MAX_LUS || u->lus[lun] == NULL)) {
trace_ufs_err_query_invalid_index(req->req_upiu.qr.opcode, lun);
return QUERY_RESULT_INVALID_INDEX;
}
@@ -761,8 +881,8 @@ static QueryRespCode ufs_read_unit_desc(UfsRequest *req)
if (lun == UFS_UPIU_RPMB_WLUN) {
memcpy(&req->rsp_upiu.qr.data, &rpmb_unit_desc, rpmb_unit_desc.length);
} else {
- /* unit descriptor is not yet supported */
- return QUERY_RESULT_INVALID_INDEX;
+ memcpy(&req->rsp_upiu.qr.data, &u->lus[lun]->unit_desc,
+ sizeof(u->lus[lun]->unit_desc));
}
return QUERY_RESULT_SUCCESS;
@@ -1012,8 +1132,7 @@ static void ufs_exec_req(UfsRequest *req)
req_result = ufs_exec_nop_cmd(req);
break;
case UPIU_TRANSACTION_COMMAND:
- /* Not yet implemented */
- req_result = UFS_REQUEST_FAIL;
+ req_result = ufs_exec_scsi_cmd(req);
break;
case UPIU_TRANSACTION_QUERY_REQ:
req_result = ufs_exec_query_cmd(req);
@@ -1024,7 +1143,14 @@ static void ufs_exec_req(UfsRequest *req)
req_result = UFS_REQUEST_FAIL;
}
- ufs_complete_req(req, req_result);
+ /*
+ * The ufs_complete_req for scsi commands is handled by the
+ * ufs_scsi_command_complete() callback function. Therefore, to avoid
+ * duplicate processing, ufs_complete_req() is not called for scsi commands.
+ */
+ if (req_result != UFS_REQUEST_NO_COMPLETE) {
+ ufs_complete_req(req, req_result);
+ }
}
static void ufs_process_req(void *opaque)
@@ -1234,6 +1360,28 @@ static void ufs_init_hc(UfsHc *u)
u->flags.permanently_disable_fw_update = 1;
}
+static bool ufs_init_wlu(UfsHc *u, UfsWLu **wlu, uint8_t wlun, Error **errp)
+{
+ UfsWLu *new_wlu = UFSWLU(qdev_new(TYPE_UFS_WLU));
+
+ qdev_prop_set_uint32(DEVICE(new_wlu), "lun", wlun);
+
+ /*
+ * The well-known lu shares the same bus as the normal lu. If the well-known
+ * lu writes the same channel value as the normal lu, the report will be
+ * made not only for the normal lu but also for the well-known lu at
+ * REPORT_LUN time. To prevent this, the channel value of normal lu is fixed
+ * to 0 and the channel value of well-known lu is fixed to 1.
+ */
+ qdev_prop_set_uint32(DEVICE(new_wlu), "channel", 1);
+ if (!qdev_realize_and_unref(DEVICE(new_wlu), BUS(&u->bus), errp)) {
+ return false;
+ }
+
+ *wlu = new_wlu;
+ return true;
+}
+
static void ufs_realize(PCIDevice *pci_dev, Error **errp)
{
UfsHc *u = UFS(pci_dev);
@@ -1242,15 +1390,55 @@ static void ufs_realize(PCIDevice *pci_dev, Error **errp)
return;
}
+ qbus_init(&u->bus, sizeof(UfsBus), TYPE_UFS_BUS, &pci_dev->qdev,
+ u->parent_obj.qdev.id);
+ u->bus.parent_bus.info = &ufs_scsi_info;
+
ufs_init_state(u);
ufs_init_hc(u);
ufs_init_pci(u, pci_dev);
+
+ if (!ufs_init_wlu(u, &u->report_wlu, UFS_UPIU_REPORT_LUNS_WLUN, errp)) {
+ return;
+ }
+
+ if (!ufs_init_wlu(u, &u->dev_wlu, UFS_UPIU_UFS_DEVICE_WLUN, errp)) {
+ return;
+ }
+
+ if (!ufs_init_wlu(u, &u->boot_wlu, UFS_UPIU_BOOT_WLUN, errp)) {
+ return;
+ }
+
+ if (!ufs_init_wlu(u, &u->rpmb_wlu, UFS_UPIU_RPMB_WLUN, errp)) {
+ return;
+ }
}
static void ufs_exit(PCIDevice *pci_dev)
{
UfsHc *u = UFS(pci_dev);
+ if (u->dev_wlu) {
+ object_unref(OBJECT(u->dev_wlu));
+ u->dev_wlu = NULL;
+ }
+
+ if (u->report_wlu) {
+ object_unref(OBJECT(u->report_wlu));
+ u->report_wlu = NULL;
+ }
+
+ if (u->rpmb_wlu) {
+ object_unref(OBJECT(u->rpmb_wlu));
+ u->rpmb_wlu = NULL;
+ }
+
+ if (u->boot_wlu) {
+ object_unref(OBJECT(u->boot_wlu));
+ u->boot_wlu = NULL;
+ }
+
qemu_bh_delete(u->doorbell_bh);
qemu_bh_delete(u->complete_bh);
@@ -1289,6 +1477,49 @@ static void ufs_class_init(ObjectClass *oc, void *data)
dc->vmsd = &ufs_vmstate;
}
+static bool ufs_bus_check_address(BusState *qbus, DeviceState *qdev,
+ Error **errp)
+{
+ SCSIDevice *dev = SCSI_DEVICE(qdev);
+ UfsBusClass *ubc = UFS_BUS_GET_CLASS(qbus);
+ UfsHc *u = UFS(qbus->parent);
+
+ if (strcmp(object_get_typename(OBJECT(dev)), TYPE_UFS_WLU) == 0) {
+ if (dev->lun != UFS_UPIU_REPORT_LUNS_WLUN &&
+ dev->lun != UFS_UPIU_UFS_DEVICE_WLUN &&
+ dev->lun != UFS_UPIU_BOOT_WLUN && dev->lun != UFS_UPIU_RPMB_WLUN) {
+ error_setg(errp, "bad well-known lun: %d", dev->lun);
+ return false;
+ }
+
+ if ((dev->lun == UFS_UPIU_REPORT_LUNS_WLUN && u->report_wlu != NULL) ||
+ (dev->lun == UFS_UPIU_UFS_DEVICE_WLUN && u->dev_wlu != NULL) ||
+ (dev->lun == UFS_UPIU_BOOT_WLUN && u->boot_wlu != NULL) ||
+ (dev->lun == UFS_UPIU_RPMB_WLUN && u->rpmb_wlu != NULL)) {
+ error_setg(errp, "well-known lun %d already exists", dev->lun);
+ return false;
+ }
+
+ return true;
+ }
+
+ if (strcmp(object_get_typename(OBJECT(dev)), TYPE_UFS_LU) != 0) {
+ error_setg(errp, "%s cannot be connected to ufs-bus",
+ object_get_typename(OBJECT(dev)));
+ return false;
+ }
+
+ return ubc->parent_check_address(qbus, qdev, errp);
+}
+
+static void ufs_bus_class_init(ObjectClass *class, void *data)
+{
+ BusClass *bc = BUS_CLASS(class);
+ UfsBusClass *ubc = UFS_BUS_CLASS(class);
+ ubc->parent_check_address = bc->check_address;
+ bc->check_address = ufs_bus_check_address;
+}
+
static const TypeInfo ufs_info = {
.name = TYPE_UFS,
.parent = TYPE_PCI_DEVICE,
@@ -1297,9 +1528,18 @@ static const TypeInfo ufs_info = {
.interfaces = (InterfaceInfo[]){ { INTERFACE_PCIE_DEVICE }, {} },
};
+static const TypeInfo ufs_bus_info = {
+ .name = TYPE_UFS_BUS,
+ .parent = TYPE_SCSI_BUS,
+ .class_init = ufs_bus_class_init,
+ .class_size = sizeof(UfsBusClass),
+ .instance_size = sizeof(UfsBus),
+};
+
static void ufs_register_types(void)
{
type_register_static(&ufs_info);
+ type_register_static(&ufs_bus_info);
}
type_init(ufs_register_types)
@@ -18,6 +18,18 @@
#define UFS_MAX_LUS 32
#define UFS_LOGICAL_BLK_SIZE 4096
+typedef struct UfsBusClass {
+ BusClass parent_class;
+ bool (*parent_check_address)(BusState *bus, DeviceState *dev, Error **errp);
+} UfsBusClass;
+
+typedef struct UfsBus {
+ SCSIBus parent_bus;
+} UfsBus;
+
+#define TYPE_UFS_BUS "ufs-bus"
+DECLARE_OBJ_CHECKERS(UfsBus, UfsBusClass, UFS_BUS, TYPE_UFS_BUS)
+
typedef enum UfsRequestState {
UFS_REQUEST_IDLE = 0,
UFS_REQUEST_READY = 1,
@@ -29,6 +41,7 @@ typedef enum UfsRequestState {
typedef enum UfsReqResult {
UFS_REQUEST_SUCCESS = 0,
UFS_REQUEST_FAIL = 1,
+ UFS_REQUEST_NO_COMPLETE = 2,
} UfsReqResult;
typedef struct UfsRequest {
@@ -44,6 +57,17 @@ typedef struct UfsRequest {
QEMUSGList *sg;
} UfsRequest;
+typedef struct UfsLu {
+ SCSIDevice qdev;
+ uint8_t lun;
+ UnitDescriptor unit_desc;
+} UfsLu;
+
+typedef struct UfsWLu {
+ SCSIDevice qdev;
+ uint8_t lun;
+} UfsWLu;
+
typedef struct UfsParams {
char *serial;
uint8_t nutrs; /* Number of UTP Transfer Request Slots */
@@ -52,12 +76,18 @@ typedef struct UfsParams {
typedef struct UfsHc {
PCIDevice parent_obj;
+ UfsBus bus;
MemoryRegion iomem;
UfsReg reg;
UfsParams params;
uint32_t reg_size;
UfsRequest *req_list;
+ UfsLu *lus[UFS_MAX_LUS];
+ UfsWLu *report_wlu;
+ UfsWLu *dev_wlu;
+ UfsWLu *boot_wlu;
+ UfsWLu *rpmb_wlu;
DeviceDescriptor device_desc;
GeometryDescriptor geometry_desc;
Attributes attributes;
@@ -71,6 +101,12 @@ typedef struct UfsHc {
#define TYPE_UFS "ufs"
#define UFS(obj) OBJECT_CHECK(UfsHc, (obj), TYPE_UFS)
+#define TYPE_UFS_LU "ufs-lu"
+#define UFSLU(obj) OBJECT_CHECK(UfsLu, (obj), TYPE_UFS_LU)
+
+#define TYPE_UFS_WLU "ufs-wlu"
+#define UFSWLU(obj) OBJECT_CHECK(UfsWLu, (obj), TYPE_UFS_WLU)
+
typedef enum UfsQueryFlagPerm {
UFS_QUERY_FLAG_NONE = 0x0,
UFS_QUERY_FLAG_READ = 0x1,
@@ -85,4 +121,11 @@ typedef enum UfsQueryAttrPerm {
UFS_QUERY_ATTR_WRITE = 0x2,
} UfsQueryAttrPerm;
+static inline bool is_wlun(uint8_t lun)
+{
+ return (lun == UFS_UPIU_REPORT_LUNS_WLUN ||
+ lun == UFS_UPIU_UFS_DEVICE_WLUN || lun == UFS_UPIU_BOOT_WLUN ||
+ lun == UFS_UPIU_RPMB_WLUN);
+}
+
#endif /* HW_UFS_UFS_H */
@@ -231,6 +231,7 @@
#define MODE_PAGE_FLEXIBLE_DISK_GEOMETRY 0x05
#define MODE_PAGE_CACHING 0x08
#define MODE_PAGE_AUDIO_CTL 0x0e
+#define MODE_PAGE_CONTROL 0x0a
#define MODE_PAGE_POWER 0x1a
#define MODE_PAGE_FAULT_FAIL 0x1c
#define MODE_PAGE_TO_PROTECT 0x1d