diff mbox series

[linux-next,RFC] powerpc: avoid lockdep when we are offline

Message ID 20220927014823.11439-1-zhouzhouyi@gmail.com (mailing list archive)
State New, archived
Headers show
Series [linux-next,RFC] powerpc: avoid lockdep when we are offline | expand

Commit Message

Zhouyi Zhou Sept. 27, 2022, 1:48 a.m. UTC
This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
I improved my fix under Paul E. McKenney's guidance:
Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/

During the cpu offlining, the sub functions of xive_teardown_cpu will
call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
travel RCU protected list, so "WARNING: suspicious RCU usage" will be
triggered.

Avoid lockdep when we are offline.

Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
---
Dear PPC and RCU developers

I found this bug when trying to do rcutorture tests in ppc VM of
Open Source Lab of Oregon State University

console.log report following bug:
[   37.635545][    T0] WARNING: suspicious RCU usage^M
[   37.636409][    T0] 6.0.0-rc4-next-20220907-dirty #8 Not tainted^M
[   37.637575][    T0] -----------------------------^M
[   37.638306][    T0] kernel/locking/lockdep.c:3723 RCU-list traversed in non-reader section!!^M
[   37.639651][    T0] ^M
[   37.639651][    T0] other info that might help us debug this:^M
[   37.639651][    T0] ^M
[   37.641381][    T0] ^M
[   37.641381][    T0] RCU used illegally from offline CPU!^M
[   37.641381][    T0] rcu_scheduler_active = 2, debug_locks = 1^M
[   37.667170][    T0] no locks held by swapper/6/0.^M
[   37.668328][    T0] ^M
[   37.668328][    T0] stack backtrace:^M
[   37.669995][    T0] CPU: 6 PID: 0 Comm: swapper/6 Not tainted 6.0.0-rc4-next-20220907-dirty #8^M
[   37.672777][    T0] Call Trace:^M
[   37.673729][    T0] [c000000004653920] [c00000000097f9b4] dump_stack_lvl+0x98/0xe0 (unreliable)^M
[   37.678579][    T0] [c000000004653960] [c0000000001f2eb8] lockdep_rcu_suspicious+0x148/0x16c^M
[   37.680425][    T0] [c0000000046539f0] [c0000000001ed9b4] __lock_acquire+0x10f4/0x26e0^M
[   37.682450][    T0] [c000000004653b30] [c0000000001efc2c] lock_acquire+0x12c/0x420^M
[   37.684113][    T0] [c000000004653c20] [c0000000010d704c] _raw_spin_lock_irqsave+0x6c/0xc0^M
[   37.686154][    T0] [c000000004653c60] [c0000000000c7b4c] xive_spapr_put_ipi+0xcc/0x150^M
[   37.687879][    T0] [c000000004653ca0] [c0000000010c72a8] xive_cleanup_cpu_ipi+0xc8/0xf0^M
[   37.689856][    T0] [c000000004653cf0] [c0000000010c7370] xive_teardown_cpu+0xa0/0xf0^M
[   37.691877][    T0] [c000000004653d30] [c0000000000fba5c] pseries_cpu_offline_self+0x5c/0x100^M
[   37.693882][    T0] [c000000004653da0] [c00000000005d2c4] arch_cpu_idle_dead+0x44/0x60^M
[   37.695739][    T0] [c000000004653dc0] [c0000000001c740c] do_idle+0x16c/0x3d0^M
[   37.697536][    T0] [c000000004653e70] [c0000000001c7a1c] cpu_startup_entry+0x3c/0x40^M
[   37.699694][    T0] [c000000004653ea0] [c00000000005ca20] start_secondary+0x6c0/0xb50^M
[   37.701742][    T0] [c000000004653f90] [c00000000000d054] start_secondary_prolog+0x10/0x14^M


Tested on PPC VM of Open Source Lab of Oregon State University.
Test results show that although "WARNING: suspicious RCU usage" has gone,
and there are less "BUG: soft lockup" reports than the original kernel
(9 vs 13), which sounds good ;-)

But after my modification, results-rcutorture-kasan/SRCU-P/console.log.diags
shows a new warning:
[  222.289242][  T110] WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0

I guess above new warning also exits in original kernel, so I write a tiny test script as follows:

#!/bin/sh

COUNTER=0
while [ $COUNTER -lt 1000 ] ; do
    qemu-system-ppc64 -nographic -smp cores=8,threads=1 -net none -M pseries -nodefaults -device spapr-vscsi -serial file:/tmp/console.log -m 2G -kernel /tmp/vmlinux -append "debug_boot_weak_hash panic=-1 console=ttyS0 rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 rcutorture.torture_type=srcud rcupdate.rcu_self_test=1 rcutorture.fwd_progress=3 srcutree.big_cpu_lim=5 rcutorture.onoff_interval=1000 rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15 rcutorture.shutdown_secs=420 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1"&
    qemu_pid=$!
    cd ~/next1/linux-next
    make clean
#I use "make vmlinux -j 8" to create heavy background jitter
    make vmlinux -j 8  > /dev/null 2>&1 
    make_pid=$!
    wait $qemu_pid
    kill $qemu_pid
    kill $make_id
    if grep -q WARN /tmp/console.log;
    then
        echo $COUNTER > /tmp/counter
        exit
    fi
    COUNTER=$(($COUNTER+1))
done

Above test shows that original kernel also warn about
"WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0"

But I am not very sure about my results, so I still add a [RFC] to my subject line.

Thank all of you for your guidance and encouragement ;-)

Cheers
Zhouyi
--
 arch/powerpc/platforms/pseries/hotplug-cpu.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Nicholas Piggin Sept. 27, 2022, 4:25 a.m. UTC | #1
On Tue Sep 27, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
> I improved my fix under Paul E. McKenney's guidance:
> Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/
>
> During the cpu offlining, the sub functions of xive_teardown_cpu will
> call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
> travel RCU protected list, so "WARNING: suspicious RCU usage" will be
> triggered.
>
> Avoid lockdep when we are offline.

I don't see how this is safe. If RCU is no longer watching the CPU then
the memory it is accessing here could be concurrently freed. I think the
warning is valid.

powerpc's problem is that cpuhp_report_idle_dead() is called before
arch_cpu_idle_dead(), so it must not rely on any RCU protection there.
I would say xive cleanup just needs to be done earlier. I wonder why it
is not done in __cpu_disable or thereabouts, that's where the interrupt
controller is supposed to be stopped.

Thanks,
Nick

>
> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
> ---
> Dear PPC and RCU developers
>
> I found this bug when trying to do rcutorture tests in ppc VM of
> Open Source Lab of Oregon State University
>
> console.log report following bug:
> [   37.635545][    T0] WARNING: suspicious RCU usage^M
> [   37.636409][    T0] 6.0.0-rc4-next-20220907-dirty #8 Not tainted^M
> [   37.637575][    T0] -----------------------------^M
> [   37.638306][    T0] kernel/locking/lockdep.c:3723 RCU-list traversed in non-reader section!!^M
> [   37.639651][    T0] ^M
> [   37.639651][    T0] other info that might help us debug this:^M
> [   37.639651][    T0] ^M
> [   37.641381][    T0] ^M
> [   37.641381][    T0] RCU used illegally from offline CPU!^M
> [   37.641381][    T0] rcu_scheduler_active = 2, debug_locks = 1^M
> [   37.667170][    T0] no locks held by swapper/6/0.^M
> [   37.668328][    T0] ^M
> [   37.668328][    T0] stack backtrace:^M
> [   37.669995][    T0] CPU: 6 PID: 0 Comm: swapper/6 Not tainted 6.0.0-rc4-next-20220907-dirty #8^M
> [   37.672777][    T0] Call Trace:^M
> [   37.673729][    T0] [c000000004653920] [c00000000097f9b4] dump_stack_lvl+0x98/0xe0 (unreliable)^M
> [   37.678579][    T0] [c000000004653960] [c0000000001f2eb8] lockdep_rcu_suspicious+0x148/0x16c^M
> [   37.680425][    T0] [c0000000046539f0] [c0000000001ed9b4] __lock_acquire+0x10f4/0x26e0^M
> [   37.682450][    T0] [c000000004653b30] [c0000000001efc2c] lock_acquire+0x12c/0x420^M
> [   37.684113][    T0] [c000000004653c20] [c0000000010d704c] _raw_spin_lock_irqsave+0x6c/0xc0^M
> [   37.686154][    T0] [c000000004653c60] [c0000000000c7b4c] xive_spapr_put_ipi+0xcc/0x150^M
> [   37.687879][    T0] [c000000004653ca0] [c0000000010c72a8] xive_cleanup_cpu_ipi+0xc8/0xf0^M
> [   37.689856][    T0] [c000000004653cf0] [c0000000010c7370] xive_teardown_cpu+0xa0/0xf0^M
> [   37.691877][    T0] [c000000004653d30] [c0000000000fba5c] pseries_cpu_offline_self+0x5c/0x100^M
> [   37.693882][    T0] [c000000004653da0] [c00000000005d2c4] arch_cpu_idle_dead+0x44/0x60^M
> [   37.695739][    T0] [c000000004653dc0] [c0000000001c740c] do_idle+0x16c/0x3d0^M
> [   37.697536][    T0] [c000000004653e70] [c0000000001c7a1c] cpu_startup_entry+0x3c/0x40^M
> [   37.699694][    T0] [c000000004653ea0] [c00000000005ca20] start_secondary+0x6c0/0xb50^M
> [   37.701742][    T0] [c000000004653f90] [c00000000000d054] start_secondary_prolog+0x10/0x14^M
>
>
> Tested on PPC VM of Open Source Lab of Oregon State University.
> Test results show that although "WARNING: suspicious RCU usage" has gone,
> and there are less "BUG: soft lockup" reports than the original kernel
> (9 vs 13), which sounds good ;-)
>
> But after my modification, results-rcutorture-kasan/SRCU-P/console.log.diags
> shows a new warning:
> [  222.289242][  T110] WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0
>
> I guess above new warning also exits in original kernel, so I write a tiny test script as follows:
>
> #!/bin/sh
>
> COUNTER=0
> while [ $COUNTER -lt 1000 ] ; do
>     qemu-system-ppc64 -nographic -smp cores=8,threads=1 -net none -M pseries -nodefaults -device spapr-vscsi -serial file:/tmp/console.log -m 2G -kernel /tmp/vmlinux -append "debug_boot_weak_hash panic=-1 console=ttyS0 rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 rcutorture.torture_type=srcud rcupdate.rcu_self_test=1 rcutorture.fwd_progress=3 srcutree.big_cpu_lim=5 rcutorture.onoff_interval=1000 rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15 rcutorture.shutdown_secs=420 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1"&
>     qemu_pid=$!
>     cd ~/next1/linux-next
>     make clean
> #I use "make vmlinux -j 8" to create heavy background jitter
>     make vmlinux -j 8  > /dev/null 2>&1 
>     make_pid=$!
>     wait $qemu_pid
>     kill $qemu_pid
>     kill $make_id
>     if grep -q WARN /tmp/console.log;
>     then
>         echo $COUNTER > /tmp/counter
>         exit
>     fi
>     COUNTER=$(($COUNTER+1))
> done
>
> Above test shows that original kernel also warn about
> "WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0"
>
> But I am not very sure about my results, so I still add a [RFC] to my subject line.
>
> Thank all of you for your guidance and encouragement ;-)
>
> Cheers
> Zhouyi
> --
>  arch/powerpc/platforms/pseries/hotplug-cpu.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> index e0a7ac5db15d..e47098f00da1 100644
> --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
> +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> @@ -64,10 +64,15 @@ static void pseries_cpu_offline_self(void)
>  
>  	local_irq_disable();
>  	idle_task_exit();
> +	/* prevent lockdep code from traveling RCU protected list
> +	 * when we are offline.
> +	 */
> +	lockdep_off();
>  	if (xive_enabled())
>  		xive_teardown_cpu();
>  	else
>  		xics_teardown_cpu();
> +	lockdep_on();
>  
>  	unregister_slb_shadow(hwcpu);
>  	rtas_stop_self();
> -- 
> 2.25.1
Zhouyi Zhou Sept. 28, 2022, 1:48 a.m. UTC | #2
Thank Nick for reviewing my patch

On Tue, Sep 27, 2022 at 12:25 PM Nicholas Piggin <npiggin@gmail.com> wrote:
>
> On Tue Sep 27, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
> > I improved my fix under Paul E. McKenney's guidance:
> > Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/
> >
> > During the cpu offlining, the sub functions of xive_teardown_cpu will
> > call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
> > travel RCU protected list, so "WARNING: suspicious RCU usage" will be
> > triggered.
> >
> > Avoid lockdep when we are offline.
>
> I don't see how this is safe. If RCU is no longer watching the CPU then
> the memory it is accessing here could be concurrently freed. I think the
> warning is valid.
Agree
>
> powerpc's problem is that cpuhp_report_idle_dead() is called before
> arch_cpu_idle_dead(), so it must not rely on any RCU protection there.
> I would say xive cleanup just needs to be done earlier. I wonder why it
> is not done in __cpu_disable or thereabouts, that's where the interrupt
> controller is supposed to be stopped.
Yes, I learn flowing events sequence from kgdb debugging
__cpu_disable -> pseries_cpu_disable -> set_cpu_online(cpu, false)  =
leads to =>  do_idle: if (cpu_is_offline(cpu) -> arch_cpu_idle_dead
so xive cleanup should be done in pseries_cpu_disable.
But as a beginner, I afraid that I am incompetent to do above
sophisticated work without error although I am very like to,
Could any expert do this for us?

Thanks a lot
Cheers
Zhouyi
>
> Thanks,
> Nick
>
> >
> > Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
> > ---
> > Dear PPC and RCU developers
> >
> > I found this bug when trying to do rcutorture tests in ppc VM of
> > Open Source Lab of Oregon State University
> >
> > console.log report following bug:
> > [   37.635545][    T0] WARNING: suspicious RCU usage^M
> > [   37.636409][    T0] 6.0.0-rc4-next-20220907-dirty #8 Not tainted^M
> > [   37.637575][    T0] -----------------------------^M
> > [   37.638306][    T0] kernel/locking/lockdep.c:3723 RCU-list traversed in non-reader section!!^M
> > [   37.639651][    T0] ^M
> > [   37.639651][    T0] other info that might help us debug this:^M
> > [   37.639651][    T0] ^M
> > [   37.641381][    T0] ^M
> > [   37.641381][    T0] RCU used illegally from offline CPU!^M
> > [   37.641381][    T0] rcu_scheduler_active = 2, debug_locks = 1^M
> > [   37.667170][    T0] no locks held by swapper/6/0.^M
> > [   37.668328][    T0] ^M
> > [   37.668328][    T0] stack backtrace:^M
> > [   37.669995][    T0] CPU: 6 PID: 0 Comm: swapper/6 Not tainted 6.0.0-rc4-next-20220907-dirty #8^M
> > [   37.672777][    T0] Call Trace:^M
> > [   37.673729][    T0] [c000000004653920] [c00000000097f9b4] dump_stack_lvl+0x98/0xe0 (unreliable)^M
> > [   37.678579][    T0] [c000000004653960] [c0000000001f2eb8] lockdep_rcu_suspicious+0x148/0x16c^M
> > [   37.680425][    T0] [c0000000046539f0] [c0000000001ed9b4] __lock_acquire+0x10f4/0x26e0^M
> > [   37.682450][    T0] [c000000004653b30] [c0000000001efc2c] lock_acquire+0x12c/0x420^M
> > [   37.684113][    T0] [c000000004653c20] [c0000000010d704c] _raw_spin_lock_irqsave+0x6c/0xc0^M
> > [   37.686154][    T0] [c000000004653c60] [c0000000000c7b4c] xive_spapr_put_ipi+0xcc/0x150^M
> > [   37.687879][    T0] [c000000004653ca0] [c0000000010c72a8] xive_cleanup_cpu_ipi+0xc8/0xf0^M
> > [   37.689856][    T0] [c000000004653cf0] [c0000000010c7370] xive_teardown_cpu+0xa0/0xf0^M
> > [   37.691877][    T0] [c000000004653d30] [c0000000000fba5c] pseries_cpu_offline_self+0x5c/0x100^M
> > [   37.693882][    T0] [c000000004653da0] [c00000000005d2c4] arch_cpu_idle_dead+0x44/0x60^M
> > [   37.695739][    T0] [c000000004653dc0] [c0000000001c740c] do_idle+0x16c/0x3d0^M
> > [   37.697536][    T0] [c000000004653e70] [c0000000001c7a1c] cpu_startup_entry+0x3c/0x40^M
> > [   37.699694][    T0] [c000000004653ea0] [c00000000005ca20] start_secondary+0x6c0/0xb50^M
> > [   37.701742][    T0] [c000000004653f90] [c00000000000d054] start_secondary_prolog+0x10/0x14^M
> >
> >
> > Tested on PPC VM of Open Source Lab of Oregon State University.
> > Test results show that although "WARNING: suspicious RCU usage" has gone,
> > and there are less "BUG: soft lockup" reports than the original kernel
> > (9 vs 13), which sounds good ;-)
> >
> > But after my modification, results-rcutorture-kasan/SRCU-P/console.log.diags
> > shows a new warning:
> > [  222.289242][  T110] WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0
> >
> > I guess above new warning also exits in original kernel, so I write a tiny test script as follows:
> >
> > #!/bin/sh
> >
> > COUNTER=0
> > while [ $COUNTER -lt 1000 ] ; do
> >     qemu-system-ppc64 -nographic -smp cores=8,threads=1 -net none -M pseries -nodefaults -device spapr-vscsi -serial file:/tmp/console.log -m 2G -kernel /tmp/vmlinux -append "debug_boot_weak_hash panic=-1 console=ttyS0 rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 rcutorture.torture_type=srcud rcupdate.rcu_self_test=1 rcutorture.fwd_progress=3 srcutree.big_cpu_lim=5 rcutorture.onoff_interval=1000 rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15 rcutorture.shutdown_secs=420 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1"&
> >     qemu_pid=$!
> >     cd ~/next1/linux-next
> >     make clean
> > #I use "make vmlinux -j 8" to create heavy background jitter
> >     make vmlinux -j 8  > /dev/null 2>&1
> >     make_pid=$!
> >     wait $qemu_pid
> >     kill $qemu_pid
> >     kill $make_id
> >     if grep -q WARN /tmp/console.log;
> >     then
> >         echo $COUNTER > /tmp/counter
> >         exit
> >     fi
> >     COUNTER=$(($COUNTER+1))
> > done
> >
> > Above test shows that original kernel also warn about
> > "WARNING: CPU: 6 PID: 110 at kernel/rcu/rcutorture.c:2806 rcu_torture_fwd_prog+0xc88/0xdd0"
> >
> > But I am not very sure about my results, so I still add a [RFC] to my subject line.
> >
> > Thank all of you for your guidance and encouragement ;-)
> >
> > Cheers
> > Zhouyi
> > --
> >  arch/powerpc/platforms/pseries/hotplug-cpu.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> > index e0a7ac5db15d..e47098f00da1 100644
> > --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
> > +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> > @@ -64,10 +64,15 @@ static void pseries_cpu_offline_self(void)
> >
> >       local_irq_disable();
> >       idle_task_exit();
> > +     /* prevent lockdep code from traveling RCU protected list
> > +      * when we are offline.
> > +      */
> > +     lockdep_off();
> >       if (xive_enabled())
> >               xive_teardown_cpu();
> >       else
> >               xics_teardown_cpu();
> > +     lockdep_on();
> >
> >       unregister_slb_shadow(hwcpu);
> >       rtas_stop_self();
> > --
> > 2.25.1
>
Nicholas Piggin Sept. 28, 2022, 2:51 a.m. UTC | #3
On Wed Sep 28, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> Thank Nick for reviewing my patch
>
> On Tue, Sep 27, 2022 at 12:25 PM Nicholas Piggin <npiggin@gmail.com> wrote:
> >
> > On Tue Sep 27, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > > This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
> > > I improved my fix under Paul E. McKenney's guidance:
> > > Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/
> > >
> > > During the cpu offlining, the sub functions of xive_teardown_cpu will
> > > call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
> > > travel RCU protected list, so "WARNING: suspicious RCU usage" will be
> > > triggered.
> > >
> > > Avoid lockdep when we are offline.
> >
> > I don't see how this is safe. If RCU is no longer watching the CPU then
> > the memory it is accessing here could be concurrently freed. I think the
> > warning is valid.
> Agree
> >
> > powerpc's problem is that cpuhp_report_idle_dead() is called before
> > arch_cpu_idle_dead(), so it must not rely on any RCU protection there.
> > I would say xive cleanup just needs to be done earlier. I wonder why it
> > is not done in __cpu_disable or thereabouts, that's where the interrupt
> > controller is supposed to be stopped.
> Yes, I learn flowing events sequence from kgdb debugging
> __cpu_disable -> pseries_cpu_disable -> set_cpu_online(cpu, false)  =
> leads to =>  do_idle: if (cpu_is_offline(cpu) -> arch_cpu_idle_dead
> so xive cleanup should be done in pseries_cpu_disable.

It's a good catch and a reasonable approach to the problem.

> But as a beginner, I afraid that I am incompetent to do above
> sophisticated work without error although I am very like to,
> Could any expert do this for us?

This will be difficult for anybody, it's tricky code. I'm not an
expert at it.

It looks like the interrupt controller disable split has been there
since long before xive. I would try just move them together than see
if that works.

Documentation/core-api/cpu_hotplug.rst says that __cpu_disable should
shut down the interrupt handler. So if there is a complication it
would probably be from powerpc-specific CPU hotplug  or interrupt
code.

Thanks,
Nick
Zhouyi Zhou Sept. 29, 2022, 1:48 a.m. UTC | #4
On Wed, Sep 28, 2022 at 10:51 AM Nicholas Piggin <npiggin@gmail.com> wrote:
>
> On Wed Sep 28, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > Thank Nick for reviewing my patch
> >
> > On Tue, Sep 27, 2022 at 12:25 PM Nicholas Piggin <npiggin@gmail.com> wrote:
> > >
> > > On Tue Sep 27, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > > > This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
> > > > I improved my fix under Paul E. McKenney's guidance:
> > > > Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/
> > > >
> > > > During the cpu offlining, the sub functions of xive_teardown_cpu will
> > > > call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
> > > > travel RCU protected list, so "WARNING: suspicious RCU usage" will be
> > > > triggered.
> > > >
> > > > Avoid lockdep when we are offline.
> > >
> > > I don't see how this is safe. If RCU is no longer watching the CPU then
> > > the memory it is accessing here could be concurrently freed. I think the
> > > warning is valid.
> > Agree
> > >
> > > powerpc's problem is that cpuhp_report_idle_dead() is called before
> > > arch_cpu_idle_dead(), so it must not rely on any RCU protection there.
> > > I would say xive cleanup just needs to be done earlier. I wonder why it
> > > is not done in __cpu_disable or thereabouts, that's where the interrupt
> > > controller is supposed to be stopped.
> > Yes, I learn flowing events sequence from kgdb debugging
> > __cpu_disable -> pseries_cpu_disable -> set_cpu_online(cpu, false)  =
> > leads to =>  do_idle: if (cpu_is_offline(cpu) -> arch_cpu_idle_dead
> > so xive cleanup should be done in pseries_cpu_disable.
>
> It's a good catch and a reasonable approach to the problem.
Thank Nick for your encouragement ;-)
>
> > But as a beginner, I afraid that I am incompetent to do above
> > sophisticated work without error although I am very like to,
> > Could any expert do this for us?
>
> This will be difficult for anybody, it's tricky code. I'm not an
> expert at it.
>
> It looks like the interrupt controller disable split has been there
> since long before xive. I would try just move them together than see
> if that works.
Yes, I use "git blame" (I learned "git blame" from Paul E. McKenny ;-)
) to see the same.
and anticipate your great works!
>
> Documentation/core-api/cpu_hotplug.rst says that __cpu_disable should
> shut down the interrupt handler. So if there is a complication it
> would probably be from powerpc-specific CPU hotplug  or interrupt
> code.
Thank Nick for your guidance! I studied
Documentation/core-api/cpu_hotplug.rst this morning.
I also found X86 shut down the interrupt handler in __cpu_disable
according to above document.

Many Thanks
Zhouyi
>
> Thanks,
> Nick
>
Zhouyi Zhou Oct. 9, 2022, 8:25 p.m. UTC | #5
On Mon, Oct 10, 2022 at 11:49 AM Nicholas Piggin <npiggin@gmail.com> wrote:
>
> On Thu Sep 29, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > On Wed, Sep 28, 2022 at 10:51 AM Nicholas Piggin <npiggin@gmail.com> wrote:
> > >
> > > On Wed Sep 28, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > > > Thank Nick for reviewing my patch
> > > >
> > > > On Tue, Sep 27, 2022 at 12:25 PM Nicholas Piggin <npiggin@gmail.com> wrote:
> > > > >
> > > > > On Tue Sep 27, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > > > > > This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
> > > > > > I improved my fix under Paul E. McKenney's guidance:
> > > > > > Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/
> > > > > >
> > > > > > During the cpu offlining, the sub functions of xive_teardown_cpu will
> > > > > > call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
> > > > > > travel RCU protected list, so "WARNING: suspicious RCU usage" will be
> > > > > > triggered.
> > > > > >
> > > > > > Avoid lockdep when we are offline.
> > > > >
> > > > > I don't see how this is safe. If RCU is no longer watching the CPU then
> > > > > the memory it is accessing here could be concurrently freed. I think the
> > > > > warning is valid.
> > > > Agree
> > > > >
> > > > > powerpc's problem is that cpuhp_report_idle_dead() is called before
> > > > > arch_cpu_idle_dead(), so it must not rely on any RCU protection there.
> > > > > I would say xive cleanup just needs to be done earlier. I wonder why it
> > > > > is not done in __cpu_disable or thereabouts, that's where the interrupt
> > > > > controller is supposed to be stopped.
> > > > Yes, I learn flowing events sequence from kgdb debugging
> > > > __cpu_disable -> pseries_cpu_disable -> set_cpu_online(cpu, false)  =
> > > > leads to =>  do_idle: if (cpu_is_offline(cpu) -> arch_cpu_idle_dead
> > > > so xive cleanup should be done in pseries_cpu_disable.
> > >
> > > It's a good catch and a reasonable approach to the problem.
> > Thank Nick for your encouragement ;-)
> > >
> > > > But as a beginner, I afraid that I am incompetent to do above
> > > > sophisticated work without error although I am very like to,
> > > > Could any expert do this for us?
> > >
> > > This will be difficult for anybody, it's tricky code. I'm not an
> > > expert at it.
> > >
> > > It looks like the interrupt controller disable split has been there
> > > since long before xive. I would try just move them together than see
> > > if that works.
> > Yes, I use "git blame" (I learned "git blame" from Paul E. McKenny ;-)
> > ) to see the same.
> > and anticipate your great works!
>
> I was thinking you could try it and see if it works and what you find.
> If you are interested and have time to look into it?
I am interested! and I have time ;-)
Thank Nick for your trust in me!
I am going to submit my babyish work in about a month (counting the
rcutoture tests time), and thank you in advance for your patience.

Cheers
Zhouyi
>
> Thanks,
> Nick
Nicholas Piggin Oct. 10, 2022, 3:49 a.m. UTC | #6
On Thu Sep 29, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> On Wed, Sep 28, 2022 at 10:51 AM Nicholas Piggin <npiggin@gmail.com> wrote:
> >
> > On Wed Sep 28, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > > Thank Nick for reviewing my patch
> > >
> > > On Tue, Sep 27, 2022 at 12:25 PM Nicholas Piggin <npiggin@gmail.com> wrote:
> > > >
> > > > On Tue Sep 27, 2022 at 11:48 AM AEST, Zhouyi Zhou wrote:
> > > > > This is second version of my fix to PPC's  "WARNING: suspicious RCU usage",
> > > > > I improved my fix under Paul E. McKenney's guidance:
> > > > > Link: https://lore.kernel.org/lkml/20220914021528.15946-1-zhouzhouyi@gmail.com/T/
> > > > >
> > > > > During the cpu offlining, the sub functions of xive_teardown_cpu will
> > > > > call __lock_acquire when CONFIG_LOCKDEP=y. The latter function will
> > > > > travel RCU protected list, so "WARNING: suspicious RCU usage" will be
> > > > > triggered.
> > > > >
> > > > > Avoid lockdep when we are offline.
> > > >
> > > > I don't see how this is safe. If RCU is no longer watching the CPU then
> > > > the memory it is accessing here could be concurrently freed. I think the
> > > > warning is valid.
> > > Agree
> > > >
> > > > powerpc's problem is that cpuhp_report_idle_dead() is called before
> > > > arch_cpu_idle_dead(), so it must not rely on any RCU protection there.
> > > > I would say xive cleanup just needs to be done earlier. I wonder why it
> > > > is not done in __cpu_disable or thereabouts, that's where the interrupt
> > > > controller is supposed to be stopped.
> > > Yes, I learn flowing events sequence from kgdb debugging
> > > __cpu_disable -> pseries_cpu_disable -> set_cpu_online(cpu, false)  =
> > > leads to =>  do_idle: if (cpu_is_offline(cpu) -> arch_cpu_idle_dead
> > > so xive cleanup should be done in pseries_cpu_disable.
> >
> > It's a good catch and a reasonable approach to the problem.
> Thank Nick for your encouragement ;-)
> >
> > > But as a beginner, I afraid that I am incompetent to do above
> > > sophisticated work without error although I am very like to,
> > > Could any expert do this for us?
> >
> > This will be difficult for anybody, it's tricky code. I'm not an
> > expert at it.
> >
> > It looks like the interrupt controller disable split has been there
> > since long before xive. I would try just move them together than see
> > if that works.
> Yes, I use "git blame" (I learned "git blame" from Paul E. McKenny ;-)
> ) to see the same.
> and anticipate your great works!

I was thinking you could try it and see if it works and what you find.
If you are interested and have time to look into it?

Thanks,
Nick
diff mbox series

Patch

diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index e0a7ac5db15d..e47098f00da1 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -64,10 +64,15 @@  static void pseries_cpu_offline_self(void)
 
 	local_irq_disable();
 	idle_task_exit();
+	/* prevent lockdep code from traveling RCU protected list
+	 * when we are offline.
+	 */
+	lockdep_off();
 	if (xive_enabled())
 		xive_teardown_cpu();
 	else
 		xics_teardown_cpu();
+	lockdep_on();
 
 	unregister_slb_shadow(hwcpu);
 	rtas_stop_self();