diff mbox series

[v8,4/6] rcu: Add RCU stall diagnosis information

Message ID 20221119092508.1766-5-thunder.leizhen@huawei.com (mailing list archive)
State Accepted
Commit a21f6c8cc0847c3785d2c6f24d44aa53985b43b4
Headers show
Series rcu: Add RCU stall diagnosis information | expand

Commit Message

Leizhen (ThunderTown) Nov. 19, 2022, 9:25 a.m. UTC
Because RCU CPU stall warnings are driven from the scheduling-clock
interrupt handler, a workload consisting of a very large number of
short-duration hardware interrupts can result in misleading stall-warning
messages.  On systems supporting only a single level of interrupts,
that is, where interrupts handlers cannot be interrupted, this can
produce misleading diagnostics.  The stack traces will show the
innocent-bystander interrupted task, not the interrupts that are
at the very least exacerbating the stall.

This situation can be improved by displaying the number of interrupts
and the CPU time that they have consumed.  Diagnosing other types
of stalls can be eased by also providing the count of softirqs and
the CPU time that they consumed as well as the number of context
switches and the task-level CPU time consumed.

Consider the following output given this change:

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:     0-....: (1250 ticks this GP) <omitted>
rcu:          hardirqs   softirqs   csw/system
rcu:  number:      624         45            0
rcu: cputime:       69          1         2425   ==> 2500(ms)

This output shows that the number of hard and soft interrupts is small,
there are no context switches, and the system takes up a lot of time. This
indicates that the current task is looping with preemption disabled.

The impact on system performance is negligible because snapshot is
recorded only once for all continuous RCU stalls.

This added debugging information is suppressed by default and can be
enabled by building the kernel with CONFIG_RCU_CPU_STALL_CPUTIME=y or
by booting with rcupdate.rcu_cpu_stall_cputime=1.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |  6 ++++
 kernel/rcu/Kconfig.debug                      | 13 ++++++++
 kernel/rcu/rcu.h                              |  1 +
 kernel/rcu/tree.c                             | 18 +++++++++++
 kernel/rcu/tree.h                             | 19 ++++++++++++
 kernel/rcu/tree_stall.h                       | 31 +++++++++++++++++++
 kernel/rcu/update.c                           |  2 ++
 7 files changed, 90 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 811b2e6d4672685..ee7d9d962591c5d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5084,6 +5084,12 @@ 
 			rcupdate.rcu_cpu_stall_timeout to be used (after
 			conversion from seconds to milliseconds).
 
+	rcupdate.rcu_cpu_stall_cputime= [KNL]
+			Provide statistics on the cputime and count of
+			interrupts and tasks during the sampling period. For
+			multiple continuous RCU stalls, all sampling periods
+			begin at half of the first RCU stall timeout.
+
 	rcupdate.rcu_expedited= [KNL]
 			Use expedited grace-period primitives, for
 			example, synchronize_rcu_expedited() instead
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index 1b0c41d490f0588..ea654fdae9a06e0 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -95,6 +95,19 @@  config RCU_EXP_CPU_STALL_TIMEOUT
 	  says to use the RCU_CPU_STALL_TIMEOUT value converted from
 	  seconds to milliseconds.
 
+config RCU_CPU_STALL_CPUTIME
+	bool "Provide additional RCU stall debug information"
+	depends on RCU_STALL_COMMON
+	default n
+	help
+	  Collect statistics during the sampling period, such as the number of
+	  (hard interrupts, soft interrupts, task switches) and the cputime of
+	  (hard interrupts, soft interrupts, kernel tasks) are added to the
+	  RCU stall report. For multiple continuous RCU stalls, all sampling
+	  periods begin at half of the first RCU stall timeout.
+	  The boot option rcupdate.rcu_cpu_stall_cputime has the same function
+	  as this one, but will override this if it exists.
+
 config RCU_TRACE
 	bool "Enable tracing for RCU"
 	depends on DEBUG_KERNEL
diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h
index 65704cbc9df7b3d..70c79adfdc7046c 100644
--- a/kernel/rcu/rcu.h
+++ b/kernel/rcu/rcu.h
@@ -224,6 +224,7 @@  extern int rcu_cpu_stall_ftrace_dump;
 extern int rcu_cpu_stall_suppress;
 extern int rcu_cpu_stall_timeout;
 extern int rcu_exp_cpu_stall_timeout;
+extern int rcu_cpu_stall_cputime;
 int rcu_jiffies_till_stall_check(void);
 int rcu_exp_jiffies_till_stall_check(void);
 
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 3ccad468887eb1a..219b4b516f3878f 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -866,6 +866,24 @@  static int rcu_implicit_dynticks_qs(struct rcu_data *rdp)
 			rdp->rcu_iw_gp_seq = rnp->gp_seq;
 			irq_work_queue_on(&rdp->rcu_iw, rdp->cpu);
 		}
+
+		if (rcu_cpu_stall_cputime && rdp->snap_record.gp_seq != rdp->gp_seq) {
+			int cpu = rdp->cpu;
+			struct rcu_snap_record *rsrp;
+			struct kernel_cpustat *kcsp;
+
+			kcsp = &kcpustat_cpu(cpu);
+
+			rsrp = &rdp->snap_record;
+			rsrp->cputime_irq     = kcpustat_field(kcsp, CPUTIME_IRQ, cpu);
+			rsrp->cputime_softirq = kcpustat_field(kcsp, CPUTIME_SOFTIRQ, cpu);
+			rsrp->cputime_system  = kcpustat_field(kcsp, CPUTIME_SYSTEM, cpu);
+			rsrp->nr_hardirqs = kstat_cpu_irqs_sum(rdp->cpu);
+			rsrp->nr_softirqs = kstat_cpu_softirqs_sum(rdp->cpu);
+			rsrp->nr_csw = nr_context_switches_cpu(rdp->cpu);
+			rsrp->jiffies = jiffies;
+			rsrp->gp_seq = rdp->gp_seq;
+		}
 	}
 
 	return 0;
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index fcb5d696eb1700d..192536916f9a607 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -158,6 +158,23 @@  union rcu_noqs {
 	u16 s; /* Set of bits, aggregate OR here. */
 };
 
+/*
+ * Record the snapshot of the core stats at half of the first RCU stall timeout.
+ * The member gp_seq is used to ensure that all members are updated only once
+ * during the sampling period. The snapshot is taken only if this gp_seq is not
+ * equal to rdp->gp_seq.
+ */
+struct rcu_snap_record {
+	unsigned long	gp_seq;		/* Track rdp->gp_seq counter */
+	u64		cputime_irq;	/* Accumulated cputime of hard irqs */
+	u64		cputime_softirq;/* Accumulated cputime of soft irqs */
+	u64		cputime_system; /* Accumulated cputime of kernel tasks */
+	unsigned long	nr_hardirqs;	/* Accumulated number of hard irqs */
+	unsigned int	nr_softirqs;	/* Accumulated number of soft irqs */
+	unsigned long long nr_csw;	/* Accumulated number of task switches */
+	unsigned long   jiffies;	/* Track jiffies value */
+};
+
 /* Per-CPU data for read-copy update. */
 struct rcu_data {
 	/* 1) quiescent-state and grace-period handling : */
@@ -262,6 +279,8 @@  struct rcu_data {
 	short rcu_onl_gp_flags;		/* ->gp_flags at last online. */
 	unsigned long last_fqs_resched;	/* Time of last rcu_resched(). */
 	unsigned long last_sched_clock;	/* Jiffies of last rcu_sched_clock_irq(). */
+	struct rcu_snap_record snap_record; /* Snapshot of core stats at half of */
+					    /* the first RCU stall timeout */
 
 	long lazy_len;			/* Length of buffered lazy callbacks. */
 	int cpu;
diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
index 5653560573e22d6..6de15fb10bc4761 100644
--- a/kernel/rcu/tree_stall.h
+++ b/kernel/rcu/tree_stall.h
@@ -428,6 +428,35 @@  static bool rcu_is_rcuc_kthread_starving(struct rcu_data *rdp, unsigned long *jp
 	return j > 2 * HZ;
 }
 
+static void print_cpu_stat_info(int cpu)
+{
+	struct rcu_snap_record rsr, *rsrp;
+	struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
+	struct kernel_cpustat *kcsp = &kcpustat_cpu(cpu);
+
+	if (!rcu_cpu_stall_cputime)
+		return;
+
+	rsrp = &rdp->snap_record;
+	if (rsrp->gp_seq != rdp->gp_seq)
+		return;
+
+	rsr.cputime_irq     = kcpustat_field(kcsp, CPUTIME_IRQ, cpu);
+	rsr.cputime_softirq = kcpustat_field(kcsp, CPUTIME_SOFTIRQ, cpu);
+	rsr.cputime_system  = kcpustat_field(kcsp, CPUTIME_SYSTEM, cpu);
+
+	pr_err("\t         hardirqs   softirqs   csw/system\n");
+	pr_err("\t number: %8ld %10d %12lld\n",
+		kstat_cpu_irqs_sum(cpu) - rsrp->nr_hardirqs,
+		kstat_cpu_softirqs_sum(cpu) - rsrp->nr_softirqs,
+		nr_context_switches_cpu(cpu) - rsrp->nr_csw);
+	pr_err("\tcputime: %8lld %10lld %12lld   ==> %d(ms)\n",
+		div_u64(rsr.cputime_irq - rsrp->cputime_irq, NSEC_PER_MSEC),
+		div_u64(rsr.cputime_softirq - rsrp->cputime_softirq, NSEC_PER_MSEC),
+		div_u64(rsr.cputime_system - rsrp->cputime_system, NSEC_PER_MSEC),
+		jiffies_to_msecs(jiffies - rsrp->jiffies));
+}
+
 /*
  * Print out diagnostic information for the specified stalled CPU.
  *
@@ -484,6 +513,8 @@  static void print_cpu_stall_info(int cpu)
 	       data_race(rcu_state.n_force_qs) - rcu_state.n_force_qs_gpstart,
 	       rcuc_starved ? buf : "",
 	       falsepositive ? " (false positive?)" : "");
+
+	print_cpu_stat_info(cpu);
 }
 
 /* Complain about starvation of grace-period kthread.  */
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index a05e23648c6b99f..76f9848a21cd5be 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -508,6 +508,8 @@  int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
 module_param(rcu_cpu_stall_timeout, int, 0644);
 int rcu_exp_cpu_stall_timeout __read_mostly = CONFIG_RCU_EXP_CPU_STALL_TIMEOUT;
 module_param(rcu_exp_cpu_stall_timeout, int, 0644);
+int rcu_cpu_stall_cputime __read_mostly = IS_ENABLED(CONFIG_RCU_CPU_STALL_CPUTIME);
+module_param(rcu_cpu_stall_cputime, int, 0644);
 #endif /* #ifdef CONFIG_RCU_STALL_COMMON */
 
 // Suppress boot-time RCU CPU stall warnings and rcutorture writer stall