diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 287153d32536..d8da34bb9ae3 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -177,12 +177,154 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
 	up->dl_write(up, value);
 }
 
+static inline bool serial8250_is_console(struct uart_port *port)
+{
+	return uart_console(port) && !hlist_unhashed_lockless(&port->cons->node);
+}
+
+static inline void serial8250_init_wctxt(struct cons_write_context *wctxt,
+					 struct console *cons)
+{
+	struct cons_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
+
+	memset(wctxt, 0, sizeof(*wctxt));
+	ctxt->console = cons;
+	ctxt->prio = CONS_PRIO_NORMAL;
+	/* Both require the port lock, so they cannot clobber each other. */
+	ctxt->thread = 1;
+}
+
+static inline void serial8250_console_acquire(struct cons_write_context *wctxt,
+					      struct console *cons)
+{
+	serial8250_init_wctxt(wctxt, cons);
+	while (!console_try_acquire(wctxt)) {
+		cpu_relax();
+		serial8250_init_wctxt(wctxt, cons);
+	}
+}
+
+static inline void serial8250_enter_unsafe(struct uart_8250_port *up)
+{
+	struct uart_port *port = &up->port;
+
+	lockdep_assert_held_once(&port->lock);
+
+	for (;;) {
+		up->cookie = console_srcu_read_lock();
+
+		serial8250_console_acquire(&up->wctxt, port->cons);
+
+		if (console_enter_unsafe(&up->wctxt))
+			break;
+
+		console_srcu_read_unlock(up->cookie);
+		cpu_relax();
+	}
+}
+
+static inline void serial8250_exit_unsafe(struct uart_8250_port *up)
+{
+	struct uart_port *port = &up->port;
+
+	lockdep_assert_held_once(&port->lock);
+
+	/*
+	 * FIXME: The 8250 driver does not support hostile takeovers
+	 * in the unsafe section.
+	 */
+	if (!WARN_ON_ONCE(!console_exit_unsafe(&up->wctxt)))
+		WARN_ON_ONCE(!console_release(&up->wctxt));
+
+	console_srcu_read_unlock(up->cookie);
+}
+
+static inline int serial8250_in_IER(struct uart_8250_port *up)
+{
+	struct uart_port *port = &up->port;
+	bool is_console;
+	int ier;
+
+	is_console = serial8250_is_console(port);
+
+	if (is_console)
+		serial8250_enter_unsafe(up);
+
+	ier = serial_in(up, UART_IER);
+
+	if (is_console)
+		serial8250_exit_unsafe(up);
+
+	return ier;
+}
+
+static inline bool __serial8250_set_IER(struct uart_8250_port *up,
+					struct cons_write_context *wctxt,
+					int ier)
+{
+	if (wctxt && !console_can_proceed(wctxt))
+		return false;
+	serial_out(up, UART_IER, ier);
+	return true;
+}
+
+static inline void serial8250_set_IER(struct uart_8250_port *up, int ier)
+{
+	struct uart_port *port = &up->port;
+	bool is_console;
+
+	is_console = serial8250_is_console(port);
+
+	if (is_console) {
+		serial8250_enter_unsafe(up);
+		__serial8250_set_IER(up, &up->wctxt, ier);
+		serial8250_exit_unsafe(up);
+	} else {
+		__serial8250_set_IER(up, NULL, ier);
+	}
+}
+
+static inline bool __serial8250_clear_IER(struct uart_8250_port *up,
+					  struct cons_write_context *wctxt,
+					  int *prior)
+{
+	unsigned int clearval = 0;
+
+	if (up->capabilities & UART_CAP_UUE)
+		clearval = UART_IER_UUE;
+
+	*prior = serial_in(up, UART_IER);
+	if (wctxt && !console_can_proceed(wctxt))
+		return false;
+	serial_out(up, UART_IER, clearval);
+	return true;
+}
+
+static inline int serial8250_clear_IER(struct uart_8250_port *up)
+{
+	struct uart_port *port = &up->port;
+	bool is_console;
+	int prior;
+
+	is_console = serial8250_is_console(port);
+
+	if (is_console) {
+		serial8250_enter_unsafe(up);
+		__serial8250_clear_IER(up, &up->wctxt, &prior);
+		serial8250_exit_unsafe(up);
+	} else {
+		__serial8250_clear_IER(up, NULL, &prior);
+	}
+
+	return prior;
+}
+
 static inline bool serial8250_set_THRI(struct uart_8250_port *up)
 {
 	if (up->ier & UART_IER_THRI)
 		return false;
 	up->ier |= UART_IER_THRI;
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 	return true;
 }
 
@@ -191,7 +333,7 @@ static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
 	if (!(up->ier & UART_IER_THRI))
 		return false;
 	up->ier &= ~UART_IER_THRI;
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 	return true;
 }
 
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 9d2a7856784f..7cc6b527c088 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -278,7 +278,7 @@ static void __aspeed_vuart_set_throttle(struct uart_8250_port *up,
 	up->ier &= ~irqs;
 	if (!throttle)
 		up->ier |= irqs;
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 }
 static void aspeed_vuart_set_throttle(struct uart_port *port, bool throttle)
 {
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index ed5a94747692..adb1a3247807 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -606,8 +606,10 @@ static int brcmuart_startup(struct uart_port *port)
 	 * Disable the Receive Data Interrupt because the DMA engine
 	 * will handle this.
 	 */
+	spin_lock_irq(&port->lock);
 	up->ier &= ~UART_IER_RDI;
-	serial_port_out(port, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
+	spin_unlock_irq(&port->lock);
 
 	priv->tx_running = false;
 	priv->dma.rx_dma = NULL;
@@ -787,6 +789,12 @@ static int brcmuart_handle_irq(struct uart_port *p)
 		spin_lock_irqsave(&p->lock, flags);
 		status = serial_port_in(p, UART_LSR);
 		if ((status & UART_LSR_DR) == 0) {
+			bool is_console;
+
+			is_console = serial8250_is_console(port);
+
+			if (is_console)
+				serial8250_enter_unsafe(p);
 
 			ier = serial_port_in(p, UART_IER);
 			/*
@@ -807,6 +815,9 @@ static int brcmuart_handle_irq(struct uart_port *p)
 				serial_port_in(p, UART_RX);
 			}
 
+			if (is_console)
+				serial8250_exit_unsafe(p);
+
 			handled = 1;
 		}
 		spin_unlock_irqrestore(&p->lock, flags);
@@ -844,12 +855,22 @@ static enum hrtimer_restart brcmuart_hrtimer_func(struct hrtimer *t)
 	/* re-enable receive unless upper layer has disabled it */
 	if ((up->ier & (UART_IER_RLSI | UART_IER_RDI)) ==
 	    (UART_IER_RLSI | UART_IER_RDI)) {
+		bool is_console;
+
+		is_console = serial8250_is_console(port);
+
+		if (is_console)
+			serial8250_enter_unsafe(p);
+
 		status = serial_port_in(p, UART_IER);
 		status |= (UART_IER_RLSI | UART_IER_RDI);
 		serial_port_out(p, UART_IER, status);
 		status = serial_port_in(p, UART_MCR);
 		status |= UART_MCR_RTS;
 		serial_port_out(p, UART_MCR, status);
+
+		if (is_console)
+			serial8250_exit_unsafe(p);
 	}
 	spin_unlock_irqrestore(&p->lock, flags);
 	return HRTIMER_NORESTART;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ab63c308be0a..688ecfc6e1d5 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -256,6 +256,7 @@ static void serial8250_timeout(struct timer_list *t)
 static void serial8250_backup_timeout(struct timer_list *t)
 {
 	struct uart_8250_port *up = from_timer(up, t, timer);
+	struct uart_port *port = &up->port;
 	unsigned int iir, ier = 0, lsr;
 	unsigned long flags;
 
@@ -266,8 +267,18 @@ static void serial8250_backup_timeout(struct timer_list *t)
 	 * based handler.
 	 */
 	if (up->port.irq) {
+		bool is_console;
+
+		is_console = serial8250_is_console(port);
+
+		if (is_console)
+			serial8250_enter_unsafe(up);
+
 		ier = serial_in(up, UART_IER);
 		serial_out(up, UART_IER, 0);
+
+		if (is_console)
+			serial8250_exit_unsafe(up);
 	}
 
 	iir = serial_in(up, UART_IIR);
@@ -290,7 +301,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
 		serial8250_tx_chars(up);
 
 	if (up->port.irq)
-		serial_out(up, UART_IER, ier);
+		serial8250_set_IER(up, ier);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
@@ -576,12 +587,30 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 
-static void univ8250_console_write(struct console *co, const char *s,
-				   unsigned int count)
+static void univ8250_console_port_lock(struct console *con, bool do_lock, unsigned long *flags)
+{
+	struct uart_8250_port *up = &serial8250_ports[con->index];
+
+	if (do_lock)
+		spin_lock_irqsave(&up->port.lock, *flags);
+	else
+		spin_unlock_irqrestore(&up->port.lock, *flags);
+}
+
+static bool univ8250_console_write_atomic(struct console *co,
+					  struct cons_write_context *wctxt)
+{
+	struct uart_8250_port *up = &serial8250_ports[co->index];
+
+	return serial8250_console_write_atomic(up, wctxt);
+}
+
+static bool univ8250_console_write_thread(struct console *co,
+					  struct cons_write_context *wctxt)
 {
 	struct uart_8250_port *up = &serial8250_ports[co->index];
 
-	serial8250_console_write(up, s, count);
+	return serial8250_console_write_thread(up, wctxt);
 }
 
 static int univ8250_console_setup(struct console *co, char *options)
@@ -669,12 +698,14 @@ static int univ8250_console_match(struct console *co, char *name, int idx,
 
 static struct console univ8250_console = {
 	.name		= "ttyS",
-	.write		= univ8250_console_write,
+	.write_atomic	= univ8250_console_write_atomic,
+	.write_thread	= univ8250_console_write_thread,
+	.port_lock	= univ8250_console_port_lock,
 	.device		= uart_console_device,
 	.setup		= univ8250_console_setup,
 	.exit		= univ8250_console_exit,
 	.match		= univ8250_console_match,
-	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
+	.flags		= CON_PRINTBUFFER | CON_ANYTIME | CON_NO_BKL,
 	.index		= -1,
 	.data		= &serial8250_reg,
 };
@@ -962,7 +993,7 @@ static void serial_8250_overrun_backoff_work(struct work_struct *work)
 	spin_lock_irqsave(&port->lock, flags);
 	up->ier |= UART_IER_RLSI | UART_IER_RDI;
 	up->port.read_status_mask |= UART_LSR_DR;
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 64770c62bbec..ccb70b20b1f4 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -185,6 +185,10 @@ static void xr17v35x_set_divisor(struct uart_port *p, unsigned int baud,
 
 static int xr17v35x_startup(struct uart_port *port)
 {
+	struct uart_8250_port *up = up_to_u8250p(port);
+
+	spin_lock_irq(&port->lock);
+
 	/*
 	 * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
 	 * MCR [7:5] and MSR [7:0]
@@ -195,7 +199,9 @@ static int xr17v35x_startup(struct uart_port *port)
 	 * Make sure all interrups are masked until initialization is
 	 * complete and the FIFOs are cleared
 	 */
-	serial_port_out(port, UART_IER, 0);
+	serial8250_set_IER(up, 0);
+
+	spin_unlock_irq(&port->lock);
 
 	return serial8250_do_startup(port);
 }
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 8aad15622a2e..74bb85b705e7 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -58,7 +58,8 @@ int fsl8250_handle_irq(struct uart_port *port)
 	if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
 		unsigned long delay;
 
-		up->ier = port->serial_in(port, UART_IER);
+		up->ier = serial8250_in_IER(up);
+
 		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
 			port->ops->stop_rx(port);
 		} else {
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 617b8ce60d6b..548904c3d11b 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -171,6 +171,7 @@ OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
 
 static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 {
+	struct uart_8250_port *up = up_to_u8250p(p);
 	int ier;
 
 	switch (offset) {
@@ -192,7 +193,7 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 		 * If we have enabled modem status IRQs we should enable
 		 * modem mode.
 		 */
-		ier = p->serial_in(p, UART_IER);
+		ier = serial8250_in_IER(up);
 
 		if (ier & UART_IER_MSI)
 			value |= UART_MCR_MDCE | UART_MCR_FCM;
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index fb1d5ec0940e..bf7ab55c8923 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -222,12 +222,38 @@ static void mtk8250_shutdown(struct uart_port *port)
 
 static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask)
 {
-	serial_out(up, UART_IER, serial_in(up, UART_IER) & (~mask));
+	struct uart_port *port = &up->port;
+	bool is_console;
+	int ier;
+
+	is_console = serial8250_is_console(port);
+
+	if (is_console)
+		serial8250_enter_unsafe(up);
+
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, ier & (~mask));
+
+	if (is_console)
+		serial8250_exit_unsafe(up);
 }
 
 static void mtk8250_enable_intrs(struct uart_8250_port *up, int mask)
 {
-	serial_out(up, UART_IER, serial_in(up, UART_IER) | mask);
+	struct uart_port *port = &up->port;
+	bool is_console;
+	int ier;
+
+	is_console = serial8250_is_console(port);
+
+	if (is_console)
+		serial8250_enter_unsafe(up);
+
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, ier | mask);
+
+	if (is_console)
+		serial8250_exit_unsafe(up);
 }
 
 static void mtk8250_set_flow_ctrl(struct uart_8250_port *up, int mode)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 734f092ef839..bfa50a26349d 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -334,8 +334,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 
 	/* drop TCR + TLR access, we setup XON/XOFF later */
 	serial8250_out_MCR(up, mcr);
-
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_dl_write(up, priv->quot);
@@ -523,16 +522,21 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state,
 	u8 efr;
 
 	pm_runtime_get_sync(port->dev);
+
+	spin_lock_irq(&port->lock);
+
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, efr | UART_EFR_ECB);
 	serial_out(up, UART_LCR, 0);
 
-	serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
+	serial8250_set_IER(up, (state != 0) ? UART_IERX_SLEEP : 0);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
 
+	spin_unlock_irq(&port->lock);
+
 	pm_runtime_mark_last_busy(port->dev);
 	pm_runtime_put_autosuspend(port->dev);
 }
@@ -649,7 +653,8 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 	if ((lsr & UART_LSR_OE) && up->overrun_backoff_time_ms > 0) {
 		unsigned long delay;
 
-		up->ier = port->serial_in(port, UART_IER);
+		spin_lock(&port->lock);
+		up->ier = serial8250_in_IER(up);
 		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
 			port->ops->stop_rx(port);
 		} else {
@@ -658,6 +663,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 			 */
 			cancel_delayed_work(&up->overrun_backoff);
 		}
+		spin_unlock(&port->lock);
 
 		delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
 		schedule_delayed_work(&up->overrun_backoff, delay);
@@ -707,8 +713,10 @@ static int omap_8250_startup(struct uart_port *port)
 	if (ret < 0)
 		goto err;
 
+	spin_lock_irq(&port->lock);
 	up->ier = UART_IER_RLSI | UART_IER_RDI;
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
+	spin_unlock_irq(&port->lock);
 
 #ifdef CONFIG_PM
 	up->capabilities |= UART_CAP_RPM;
@@ -748,8 +756,10 @@ static void omap_8250_shutdown(struct uart_port *port)
 	if (priv->habit & UART_HAS_EFR2)
 		serial_out(up, UART_OMAP_EFR2, 0x0);
 
+	spin_lock_irq(&port->lock);
 	up->ier = 0;
-	serial_out(up, UART_IER, 0);
+	serial8250_set_IER(up, 0);
+	spin_unlock_irq(&port->lock);
 
 	if (up->dma)
 		serial8250_release_dma(up);
@@ -797,7 +807,7 @@ static void omap_8250_unthrottle(struct uart_port *port)
 		up->dma->rx_dma(up);
 	up->ier |= UART_IER_RLSI | UART_IER_RDI;
 	port->read_status_mask |= UART_LSR_DR;
-	serial_out(up, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	pm_runtime_mark_last_busy(port->dev);
@@ -956,7 +966,7 @@ static void __dma_rx_complete(void *param)
 	__dma_rx_do_complete(p);
 	if (!priv->throttled) {
 		p->ier |= UART_IER_RLSI | UART_IER_RDI;
-		serial_out(p, UART_IER, p->ier);
+		serial8250_set_IER(p, p->ier);
 		if (!(priv->habit & UART_HAS_EFR2))
 			omap_8250_rx_dma(p);
 	}
@@ -1013,7 +1023,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p)
 			 * callback to run.
 			 */
 			p->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
-			serial_out(p, UART_IER, p->ier);
+			serial8250_set_IER(p, p->ier);
 		}
 		goto out;
 	}
@@ -1226,12 +1236,12 @@ static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir,
 		 * periodic timeouts, re-enable interrupts.
 		 */
 		up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
-		serial_out(up, UART_IER, up->ier);
+		serial8250_set_IER(up, up->ier);
 		omap_8250_rx_dma_flush(up);
 		serial_in(up, UART_IIR);
 		serial_out(up, UART_OMAP_EFR2, 0x0);
 		up->ier |= UART_IER_RLSI | UART_IER_RDI;
-		serial_out(up, UART_IER, up->ier);
+		serial8250_set_IER(up, up->ier);
 	}
 }
 
@@ -1717,12 +1727,16 @@ static int omap8250_runtime_resume(struct device *dev)
 
 	up = serial8250_get_port(priv->line);
 
+	spin_lock_irq(&up->port.lock);
+
 	if (omap8250_lost_context(up))
 		omap8250_restore_regs(up);
 
 	if (up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2))
 		omap_8250_rx_dma(up);
 
+	spin_unlock_irq(&up->port.lock);
+
 	priv->latency = priv->calc_latency;
 	schedule_work(&priv->qos_work);
 	return 0;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fa43df05342b..f1976d9a8a38 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -744,6 +744,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 	serial8250_rpm_get(p);
 
 	if (p->capabilities & UART_CAP_SLEEP) {
+		spin_lock_irq(&p->port.lock);
 		if (p->capabilities & UART_CAP_EFR) {
 			lcr = serial_in(p, UART_LCR);
 			efr = serial_in(p, UART_EFR);
@@ -751,25 +752,18 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 			serial_out(p, UART_EFR, UART_EFR_ECB);
 			serial_out(p, UART_LCR, 0);
 		}
-		serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+		serial8250_set_IER(p, sleep ? UART_IERX_SLEEP : 0);
 		if (p->capabilities & UART_CAP_EFR) {
 			serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
 			serial_out(p, UART_EFR, efr);
 			serial_out(p, UART_LCR, lcr);
 		}
+		spin_unlock_irq(&p->port.lock);
 	}
 
 	serial8250_rpm_put(p);
 }
 
-static void serial8250_clear_IER(struct uart_8250_port *up)
-{
-	if (up->capabilities & UART_CAP_UUE)
-		serial_out(up, UART_IER, UART_IER_UUE);
-	else
-		serial_out(up, UART_IER, 0);
-}
-
 #ifdef CONFIG_SERIAL_8250_RSA
 /*
  * Attempts to turn on the RSA FIFO.  Returns zero on failure.
@@ -1033,8 +1027,10 @@ static int broken_efr(struct uart_8250_port *up)
  */
 static void autoconfig_16550a(struct uart_8250_port *up)
 {
+	struct uart_port *port = &up->port;
 	unsigned char status1, status2;
 	unsigned int iersave;
+	bool is_console;
 
 	up->port.type = PORT_16550A;
 	up->capabilities |= UART_CAP_FIFO;
@@ -1150,6 +1146,11 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 		return;
 	}
 
+	is_console = serial8250_is_console(port);
+
+	if (is_console)
+		serial8250_enter_unsafe(up);
+
 	/*
 	 * Try writing and reading the UART_IER_UUE bit (b6).
 	 * If it works, this is probably one of the Xscale platform's
@@ -1185,6 +1186,9 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	}
 	serial_out(up, UART_IER, iersave);
 
+	if (is_console)
+		serial8250_exit_unsafe(up);
+
 	/*
 	 * We distinguish between 16550A and U6 16550A by counting
 	 * how many bytes are in the FIFO.
@@ -1226,6 +1230,13 @@ static void autoconfig(struct uart_8250_port *up)
 	up->bugs = 0;
 
 	if (!(port->flags & UPF_BUGGY_UART)) {
+		bool is_console;
+
+		is_console = serial8250_is_console(port);
+
+		if (is_console)
+			serial8250_enter_unsafe(up);
+
 		/*
 		 * Do a simple existence test first; if we fail this,
 		 * there's no point trying anything else.
@@ -1255,6 +1266,10 @@ static void autoconfig(struct uart_8250_port *up)
 #endif
 		scratch3 = serial_in(up, UART_IER) & UART_IER_ALL_INTR;
 		serial_out(up, UART_IER, scratch);
+
+		if (is_console)
+			serial8250_exit_unsafe(up);
+
 		if (scratch2 != 0 || scratch3 != UART_IER_ALL_INTR) {
 			/*
 			 * We failed; there's nothing here
@@ -1376,6 +1391,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
 	unsigned char save_ICP = 0;
 	unsigned int ICP = 0;
 	unsigned long irqs;
+	bool is_console;
 	int irq;
 
 	if (port->flags & UPF_FOURPORT) {
@@ -1385,8 +1401,12 @@ static void autoconfig_irq(struct uart_8250_port *up)
 		inb_p(ICP);
 	}
 
-	if (uart_console(port))
+	is_console = serial8250_is_console(port);
+
+	if (is_console) {
 		console_lock();
+		serial8250_enter_unsafe(up);
+	}
 
 	/* forget possible initially masked and pending IRQ */
 	probe_irq_off(probe_irq_on());
@@ -1418,8 +1438,10 @@ static void autoconfig_irq(struct uart_8250_port *up)
 	if (port->flags & UPF_FOURPORT)
 		outb_p(save_ICP, ICP);
 
-	if (uart_console(port))
+	if (is_console) {
+		serial8250_exit_unsafe(up);
 		console_unlock();
+	}
 
 	port->irq = (irq > 0) ? irq : 0;
 }
@@ -1432,7 +1454,7 @@ static void serial8250_stop_rx(struct uart_port *port)
 
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	up->port.read_status_mask &= ~UART_LSR_DR;
-	serial_port_out(port, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 
 	serial8250_rpm_put(up);
 }
@@ -1462,7 +1484,7 @@ void serial8250_em485_stop_tx(struct uart_8250_port *p)
 		serial8250_clear_and_reinit_fifos(p);
 
 		p->ier |= UART_IER_RLSI | UART_IER_RDI;
-		serial_port_out(&p->port, UART_IER, p->ier);
+		serial8250_set_IER(p, p->ier);
 	}
 }
 EXPORT_SYMBOL_GPL(serial8250_em485_stop_tx);
@@ -1709,7 +1731,7 @@ static void serial8250_disable_ms(struct uart_port *port)
 	mctrl_gpio_disable_ms(up->gpios);
 
 	up->ier &= ~UART_IER_MSI;
-	serial_port_out(port, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 }
 
 static void serial8250_enable_ms(struct uart_port *port)
@@ -1725,7 +1747,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 	up->ier |= UART_IER_MSI;
 
 	serial8250_rpm_get(up);
-	serial_port_out(port, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 	serial8250_rpm_put(up);
 }
 
@@ -2160,9 +2182,10 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	serial8250_rpm_get(up);
 	/*
 	 *	First save the IER then disable the interrupts
+	 *
+	 *	Best-effort IER access because other CPUs are quiesced.
 	 */
-	ier = serial_port_in(port, UART_IER);
-	serial8250_clear_IER(up);
+	__serial8250_clear_IER(up, NULL, &ier);
 
 	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
 	/*
@@ -2175,7 +2198,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
-	serial_port_out(port, UART_IER, ier);
+	__serial8250_set_IER(up, NULL, ier);
 	serial8250_rpm_put(up);
 }
 
@@ -2186,6 +2209,7 @@ int serial8250_do_startup(struct uart_port *port)
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
 	unsigned char iir;
+	bool is_console;
 	int retval;
 	u16 lsr;
 
@@ -2203,21 +2227,25 @@ int serial8250_do_startup(struct uart_port *port)
 	serial8250_rpm_get(up);
 	if (port->type == PORT_16C950) {
 		/* Wake up and initialize UART */
+		spin_lock_irqsave(&port->lock, flags);
 		up->acr = 0;
 		serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
 		serial_port_out(port, UART_EFR, UART_EFR_ECB);
-		serial_port_out(port, UART_IER, 0);
+		serial8250_set_IER(up, 0);
 		serial_port_out(port, UART_LCR, 0);
 		serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
 		serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
 		serial_port_out(port, UART_EFR, UART_EFR_ECB);
 		serial_port_out(port, UART_LCR, 0);
+		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
 	if (port->type == PORT_DA830) {
 		/* Reset the port */
-		serial_port_out(port, UART_IER, 0);
+		spin_lock_irqsave(&port->lock, flags);
+		serial8250_set_IER(up, 0);
 		serial_port_out(port, UART_DA830_PWREMU_MGMT, 0);
+		spin_unlock_irqrestore(&port->lock, flags);
 		mdelay(10);
 
 		/* Enable Tx, Rx and free run mode */
@@ -2315,6 +2343,8 @@ int serial8250_do_startup(struct uart_port *port)
 	if (retval)
 		goto out;
 
+	is_console = serial8250_is_console(port);
+
 	if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
 		unsigned char iir1;
 
@@ -2331,6 +2361,9 @@ int serial8250_do_startup(struct uart_port *port)
 		 */
 		spin_lock_irqsave(&port->lock, flags);
 
+		if (is_console)
+			serial8250_enter_unsafe(up);
+
 		wait_for_xmitr(up, UART_LSR_THRE);
 		serial_port_out_sync(port, UART_IER, UART_IER_THRI);
 		udelay(1); /* allow THRE to set */
@@ -2341,6 +2374,9 @@ int serial8250_do_startup(struct uart_port *port)
 		iir = serial_port_in(port, UART_IIR);
 		serial_port_out(port, UART_IER, 0);
 
+		if (is_console)
+			serial8250_exit_unsafe(up);
+
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		if (port->irqflags & IRQF_SHARED)
@@ -2395,10 +2431,14 @@ int serial8250_do_startup(struct uart_port *port)
 	 * Do a quick test to see if we receive an interrupt when we enable
 	 * the TX irq.
 	 */
+	if (is_console)
+		serial8250_enter_unsafe(up);
 	serial_port_out(port, UART_IER, UART_IER_THRI);
 	lsr = serial_port_in(port, UART_LSR);
 	iir = serial_port_in(port, UART_IIR);
 	serial_port_out(port, UART_IER, 0);
+	if (is_console)
+		serial8250_exit_unsafe(up);
 
 	if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
 		if (!(up->bugs & UART_BUG_TXEN)) {
@@ -2430,7 +2470,7 @@ int serial8250_do_startup(struct uart_port *port)
 	if (up->dma) {
 		const char *msg = NULL;
 
-		if (uart_console(port))
+		if (is_console)
 			msg = "forbid DMA for kernel console";
 		else if (serial8250_request_dma(up))
 			msg = "failed to request DMA";
@@ -2481,7 +2521,7 @@ void serial8250_do_shutdown(struct uart_port *port)
 	 */
 	spin_lock_irqsave(&port->lock, flags);
 	up->ier = 0;
-	serial_port_out(port, UART_IER, 0);
+	serial8250_set_IER(up, 0);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	synchronize_irq(port->irq);
@@ -2847,7 +2887,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (up->capabilities & UART_CAP_RTOIE)
 		up->ier |= UART_IER_RTOIE;
 
-	serial_port_out(port, UART_IER, up->ier);
+	serial8250_set_IER(up, up->ier);
 
 	if (up->capabilities & UART_CAP_EFR) {
 		unsigned char efr = 0;
@@ -3312,12 +3352,21 @@ EXPORT_SYMBOL_GPL(serial8250_set_defaults);
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 
-static void serial8250_console_putchar(struct uart_port *port, unsigned char ch)
+static bool serial8250_console_putchar(struct uart_port *port, unsigned char ch,
+				       struct cons_write_context *wctxt)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 
 	wait_for_xmitr(up, UART_LSR_THRE);
+	if (!console_can_proceed(wctxt))
+		return false;
 	serial_port_out(port, UART_TX, ch);
+	if (ch == '\n')
+		up->console_newline_needed = false;
+	else
+		up->console_newline_needed = true;
+
+	return true;
 }
 
 /*
@@ -3346,33 +3395,134 @@ static void serial8250_console_restore(struct uart_8250_port *up)
 	serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
 }
 
+static bool __serial8250_console_write(struct uart_port *port, struct cons_write_context *wctxt,
+		const char *s, unsigned int count,
+		bool (*putchar)(struct uart_port *, unsigned char, struct cons_write_context *))
+{
+	bool finished = false;
+	unsigned int i;
+
+	for (i = 0; i < count; i++, s++) {
+		if (*s == '\n') {
+			if (!putchar(port, '\r', wctxt))
+				goto out;
+		}
+		if (!putchar(port, *s, wctxt))
+			goto out;
+	}
+	finished = true;
+out:
+	return finished;
+}
+
+static bool serial8250_console_write(struct uart_port *port, struct cons_write_context *wctxt,
+		const char *s, unsigned int count,
+		bool (*putchar)(struct uart_port *, unsigned char, struct cons_write_context *))
+{
+	return __serial8250_console_write(port, wctxt, s, count, putchar);
+}
+
+static bool atomic_print_line(struct uart_8250_port *up,
+			      struct cons_write_context *wctxt)
+{
+	struct uart_port *port = &up->port;
+	char buf[4];
+
+	if (up->console_newline_needed &&
+	    !__serial8250_console_write(port, wctxt, "\n", 1, serial8250_console_putchar)) {
+		return false;
+	}
+
+	sprintf(buf, "A%d", raw_smp_processor_id());
+	if (!__serial8250_console_write(port, wctxt, buf, strlen(buf), serial8250_console_putchar))
+		return false;
+
+	return __serial8250_console_write(port, wctxt, wctxt->outbuf, wctxt->len,
+					  serial8250_console_putchar);
+}
+
+static void atomic_console_reacquire(struct cons_write_context *wctxt,
+				     struct cons_write_context *wctxt_init)
+{
+	memcpy(wctxt, wctxt_init, sizeof(*wctxt));
+	while (!console_try_acquire(wctxt)) {
+		cpu_relax();
+		memcpy(wctxt, wctxt_init, sizeof(*wctxt));
+	}
+}
+
 /*
- * Print a string to the serial port using the device FIFO
- *
- * It sends fifosize bytes and then waits for the fifo
- * to get empty.
+ * It should be possible to support a hostile takeover in an unsafe
+ * section if it is write_atomic() that is being taken over. But where
+ * to put this policy?
  */
-static void serial8250_console_fifo_write(struct uart_8250_port *up,
-					  const char *s, unsigned int count)
+bool serial8250_console_write_atomic(struct uart_8250_port *up,
+				     struct cons_write_context *wctxt)
 {
-	int i;
-	const char *end = s + count;
-	unsigned int fifosize = up->tx_loadsz;
-	bool cr_sent = false;
-
-	while (s != end) {
-		wait_for_lsr(up, UART_LSR_THRE);
-
-		for (i = 0; i < fifosize && s != end; ++i) {
-			if (*s == '\n' && !cr_sent) {
-				serial_out(up, UART_TX, '\r');
-				cr_sent = true;
-			} else {
-				serial_out(up, UART_TX, *s++);
-				cr_sent = false;
-			}
+	struct cons_write_context wctxt_init = {};
+	struct cons_context *ctxt_init = &ACCESS_PRIVATE(&wctxt_init, ctxt);
+	struct cons_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
+	bool can_print = true;
+	unsigned int ier;
+
+	/* With write_atomic, another context may hold the port->lock. */
+
+	ctxt_init->console = ctxt->console;
+	ctxt_init->prio = ctxt->prio;
+	ctxt_init->thread = ctxt->thread;
+
+	touch_nmi_watchdog();
+
+	/*
+	 * Enter unsafe in order to disable interrupts. If the console is
+	 * lost before the interrupts are disabled, bail out because another
+	 * context took over the printing. If the console is lost after the
+	 * interrutps are disabled, the console must be reacquired in order
+	 * to re-enable the interrupts. However in that case no printing is
+	 * allowed because another context took over the printing.
+	 */
+
+	if (!console_enter_unsafe(wctxt))
+		return false;
+
+	if (!__serial8250_clear_IER(up, wctxt, &ier))
+		return false;
+
+	if (console_exit_unsafe(wctxt)) {
+		can_print = atomic_print_line(up, wctxt);
+		if (!can_print)
+			atomic_console_reacquire(wctxt, &wctxt_init);
+
+		if (can_print) {
+			can_print = console_can_proceed(wctxt);
+			if (can_print)
+				wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+			else
+				atomic_console_reacquire(wctxt, &wctxt_init);
+		}
+	} else {
+		atomic_console_reacquire(wctxt, &wctxt_init);
+	}
+
+	/*
+	 * Enter unsafe in order to enable interrupts. If the console is
+	 * lost before the interrupts are enabled, the console must be
+	 * reacquired in order to re-enable the interrupts.
+	 */
+
+	for (;;) {
+		if (console_enter_unsafe(wctxt) &&
+		    __serial8250_set_IER(up, wctxt, ier)) {
+			break;
 		}
+
+		/* HW-IRQs still disabled. Reacquire to enable them. */
+		atomic_console_reacquire(wctxt, &wctxt_init);
 	}
+
+	console_exit_unsafe(wctxt);
+
+	return can_print;
 }
 
 /*
@@ -3384,64 +3534,54 @@ static void serial8250_console_fifo_write(struct uart_8250_port *up,
  *	Doing runtime PM is really a bad idea for the kernel console.
  *	Thus, we assume the function is called when device is powered up.
  */
-void serial8250_console_write(struct uart_8250_port *up, const char *s,
-			      unsigned int count)
+bool serial8250_console_write_thread(struct uart_8250_port *up,
+				     struct cons_write_context *wctxt)
 {
 	struct uart_8250_em485 *em485 = up->em485;
 	struct uart_port *port = &up->port;
-	unsigned long flags;
-	unsigned int ier, use_fifo;
-	int locked = 1;
-
-	touch_nmi_watchdog();
-
-	if (oops_in_progress)
-		locked = spin_trylock_irqsave(&port->lock, flags);
-	else
-		spin_lock_irqsave(&port->lock, flags);
+	unsigned int count = wctxt->len;
+	const char *s = wctxt->outbuf;
+	bool finished = false;
+	unsigned int ier;
+	char buf[4];
 
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
-	ier = serial_port_in(port, UART_IER);
-	serial8250_clear_IER(up);
+	if (!console_enter_unsafe(wctxt) ||
+	    !__serial8250_clear_IER(up, wctxt, &ier)) {
+		goto out;
+	}
+	if (!console_exit_unsafe(wctxt))
+		goto out;
 
 	/* check scratch reg to see if port powered off during system sleep */
 	if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+		if (!console_enter_unsafe(wctxt))
+			goto out;
 		serial8250_console_restore(up);
+		if (!console_exit_unsafe(wctxt))
+			goto out;
 		up->canary = 0;
 	}
 
 	if (em485) {
-		if (em485->tx_stopped)
+		if (em485->tx_stopped) {
+			if (!console_enter_unsafe(wctxt))
+				goto out;
 			up->rs485_start_tx(up);
-		mdelay(port->rs485.delay_rts_before_send);
+			if (!console_exit_unsafe(wctxt))
+				goto out;
+		}
+		mdelay(port->rs485.delay_rts_before_send); /* WTF?! Seriously?! */
 	}
 
-	use_fifo = (up->capabilities & UART_CAP_FIFO) &&
-		/*
-		 * BCM283x requires to check the fifo
-		 * after each byte.
-		 */
-		!(up->capabilities & UART_CAP_MINI) &&
-		/*
-		 * tx_loadsz contains the transmit fifo size
-		 */
-		up->tx_loadsz > 1 &&
-		(up->fcr & UART_FCR_ENABLE_FIFO) &&
-		port->state &&
-		test_bit(TTY_PORT_INITIALIZED, &port->state->port.iflags) &&
-		/*
-		 * After we put a data in the fifo, the controller will send
-		 * it regardless of the CTS state. Therefore, only use fifo
-		 * if we don't use control flow.
-		 */
-		!(up->port.flags & UPF_CONS_FLOW);
+	sprintf(buf, "T%d", raw_smp_processor_id());
+	if (serial8250_console_write(port, wctxt, buf, strlen(buf), serial8250_console_putchar))
+		finished = serial8250_console_write(port, wctxt, s, count, serial8250_console_putchar);
 
-	if (likely(use_fifo))
-		serial8250_console_fifo_write(up, s, count);
-	else
-		uart_console_write(port, s, count, serial8250_console_putchar);
+	if (!finished)
+		goto out;
 
 	/*
 	 *	Finally, wait for transmitter to become empty
@@ -3450,12 +3590,20 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
 	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
 
 	if (em485) {
-		mdelay(port->rs485.delay_rts_after_send);
-		if (em485->tx_stopped)
+		mdelay(port->rs485.delay_rts_after_send); /* WTF?! Seriously?! */
+		if (em485->tx_stopped) {
+			if (!console_enter_unsafe(wctxt))
+				goto out;
 			up->rs485_stop_tx(up);
+			if (!console_exit_unsafe(wctxt))
+				goto out;
+		}
 	}
-
-	serial_port_out(port, UART_IER, ier);
+	if (!console_enter_unsafe(wctxt))
+		goto out;
+	WARN_ON_ONCE(!__serial8250_set_IER(up, wctxt, ier));
+	if (!console_exit_unsafe(wctxt))
+		goto out;
 
 	/*
 	 *	The receive handling will happen properly because the
@@ -3464,11 +3612,15 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
 	 *	call it if we have saved something in the saved flags
 	 *	while processing with interrupts off.
 	 */
-	if (up->msr_saved_flags)
+	if (up->msr_saved_flags) {
+		if (!console_enter_unsafe(wctxt))
+			goto out;
 		serial8250_modem_status(up);
-
-	if (locked)
-		spin_unlock_irqrestore(&port->lock, flags);
+		if (!console_exit_unsafe(wctxt))
+			goto out;
+	}
+out:
+	return finished;
 }
 
 static unsigned int probe_baud(struct uart_port *port)
@@ -3488,6 +3640,7 @@ static unsigned int probe_baud(struct uart_port *port)
 
 int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
 {
+	struct uart_8250_port *up = up_to_u8250p(port);
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
@@ -3497,6 +3650,8 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
 	if (!port->iobase && !port->membase)
 		return -ENODEV;
 
+	up->console_newline_needed = false;
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else if (probe)
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 978dc196c29b..22656e8370ea 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -9,6 +9,7 @@ config SERIAL_8250
 	depends on !S390
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
+	select HAVE_ATOMIC_CONSOLE
 	help
 	  This selects whether you want to include the driver for the standard
 	  serial ports.  The standard answer is Y.  People who might say N
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 2bd32c8ece39..9901f916dc1a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2336,8 +2336,11 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 	 * able to Re-start_rx later.
 	 */
 	if (!console_suspend_enabled && uart_console(uport)) {
-		if (uport->ops->start_rx)
+		if (uport->ops->start_rx) {
+			spin_lock_irq(&uport->lock);
 			uport->ops->stop_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
 		goto unlock;
 	}
 
@@ -2430,8 +2433,11 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		if (console_suspend_enabled)
 			uart_change_pm(state, UART_PM_STATE_ON);
 		uport->ops->set_termios(uport, &termios, NULL);
-		if (!console_suspend_enabled && uport->ops->start_rx)
+		if (!console_suspend_enabled && uport->ops->start_rx) {
+			spin_lock_irq(&uport->lock);
 			uport->ops->start_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
 		if (console_suspend_enabled)
 			console_start(uport->cons);
 	}
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 19376bee9667..9055a22992ed 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -125,6 +125,8 @@ struct uart_8250_port {
 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
 	unsigned char		msr_saved_flags;
 
+	bool			console_newline_needed;
+
 	struct uart_8250_dma	*dma;
 	const struct uart_8250_ops *ops;
 
@@ -139,6 +141,9 @@ struct uart_8250_port {
 	/* Serial port overrun backoff */
 	struct delayed_work overrun_backoff;
 	u32 overrun_backoff_time_ms;
+
+	struct cons_write_context wctxt;
+	int cookie;
 };
 
 static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
@@ -178,8 +183,10 @@ void serial8250_tx_chars(struct uart_8250_port *up);
 unsigned int serial8250_modem_status(struct uart_8250_port *up);
 void serial8250_init_port(struct uart_8250_port *up);
 void serial8250_set_defaults(struct uart_8250_port *up);
-void serial8250_console_write(struct uart_8250_port *up, const char *s,
-			      unsigned int count);
+bool serial8250_console_write_atomic(struct uart_8250_port *up,
+				     struct cons_write_context *wctxt);
+bool serial8250_console_write_thread(struct uart_8250_port *up,
+				     struct cons_write_context *wctxt);
 int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
 int serial8250_console_exit(struct uart_port *port);
 
