diff mbox

[v4,18/21] fuse: Add support for pid namespaces

Message ID 1461699396-33000-19-git-send-email-seth.forshee@canonical.com (mailing list archive)
State New, archived
Headers show

Commit Message

Seth Forshee April 26, 2016, 7:36 p.m. UTC
When the userspace process servicing fuse requests is running in
a pid namespace then pids passed via the fuse fd are not being
translated into that process' namespace. Translation is necessary
for the pid to be useful to that process.

Since no use case currently exists for changing namespaces all
translations can be done relative to the pid namespace in use
when fuse_conn_init() is called. For fuse this translates to
mount time, and for cuse this is when /dev/cuse is opened. IO for
this connection from another namespace will return errors.

Requests from processes whose pid cannot be translated into the
target namespace are not permitted, except for requests
allocated via fuse_get_req_nofail_nopages. For no-fail requests
in.h.pid will be 0 if the pid translation fails.

File locking changes based on previous work done by Eric
Biederman.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
---
 fs/fuse/dev.c    | 19 +++++++++++++++----
 fs/fuse/file.c   | 22 +++++++++++++++++-----
 fs/fuse/fuse_i.h |  4 ++++
 fs/fuse/inode.c  |  3 +++
 4 files changed, 39 insertions(+), 9 deletions(-)

Comments

Sheng Yang July 20, 2016, 2:44 a.m. UTC | #1
On Tue, Apr 26, 2016 at 12:36 PM, Seth Forshee
<seth.forshee@canonical.com> wrote:
> When the userspace process servicing fuse requests is running in
> a pid namespace then pids passed via the fuse fd are not being
> translated into that process' namespace. Translation is necessary
> for the pid to be useful to that process.
>
> Since no use case currently exists for changing namespaces all
> translations can be done relative to the pid namespace in use
> when fuse_conn_init() is called. For fuse this translates to
> mount time, and for cuse this is when /dev/cuse is opened. IO for
> this connection from another namespace will return errors.
>
> Requests from processes whose pid cannot be translated into the
> target namespace are not permitted, except for requests
> allocated via fuse_get_req_nofail_nopages. For no-fail requests
> in.h.pid will be 0 if the pid translation fails.

Hi Seth,

This patch caused a regression in our major container use case with
FUSE in Ubuntu 16.04, as patch was checked in as Ubuntu Sauce in
Ubuntu 4.4.0-6.21 kernel.

The use case is:
1. Create a Docker container.
2. Inside the container, start the FUSE backend, and mounted fs.
3. Following step 2 in the container, create a loopback device to map
a file in the mounted fuse to create a block device, which will be
available to the whole system.

It works well before this commit.

The use case is broken because no matter which namespace losetup runs,
the real request from loopback device seems always come from init ns,
thus it will be in different ns running fuse backend. So the request
will got denied, because the ns running fuse won't able to see the
things from higher level(level 0 in fact) pid namespace.

I think since init pid ns has ability to access any process in the
system, it should able to access the fuse mounted by any pid namespace
process as well.

What you think?

--Sheng

>
> File locking changes based on previous work done by Eric
> Biederman.
>
> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
> Acked-by: Miklos Szeredi <mszeredi@redhat.com>
> ---
>  fs/fuse/dev.c    | 19 +++++++++++++++----
>  fs/fuse/file.c   | 22 +++++++++++++++++-----
>  fs/fuse/fuse_i.h |  4 ++++
>  fs/fuse/inode.c  |  3 +++
>  4 files changed, 39 insertions(+), 9 deletions(-)
>
> diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
> index cbece1221417..4e91b2ac25a7 100644
> --- a/fs/fuse/dev.c
> +++ b/fs/fuse/dev.c
> @@ -19,6 +19,7 @@
>  #include <linux/pipe_fs_i.h>
>  #include <linux/swap.h>
>  #include <linux/splice.h>
> +#include <linux/sched.h>
>
>  MODULE_ALIAS_MISCDEV(FUSE_MINOR);
>  MODULE_ALIAS("devname:fuse");
> @@ -124,11 +125,11 @@ static void __fuse_put_request(struct fuse_req *req)
>         atomic_dec(&req->count);
>  }
>
> -static void fuse_req_init_context(struct fuse_req *req)
> +static void fuse_req_init_context(struct fuse_conn *fc, struct fuse_req *req)
>  {
>         req->in.h.uid = from_kuid_munged(&init_user_ns, current_fsuid());
>         req->in.h.gid = from_kgid_munged(&init_user_ns, current_fsgid());
> -       req->in.h.pid = current->pid;
> +       req->in.h.pid = pid_nr_ns(task_pid(current), fc->pid_ns);
>  }
>
>  void fuse_set_initialized(struct fuse_conn *fc)
> @@ -181,10 +182,14 @@ static struct fuse_req *__fuse_get_req(struct fuse_conn *fc, unsigned npages,
>                 goto out;
>         }
>
> -       fuse_req_init_context(req);
> +       fuse_req_init_context(fc, req);
>         __set_bit(FR_WAITING, &req->flags);
>         if (for_background)
>                 __set_bit(FR_BACKGROUND, &req->flags);
> +       if (req->in.h.pid == 0) {
> +               fuse_put_request(fc, req);
> +               return ERR_PTR(-EOVERFLOW);
> +       }
>
>         return req;
>
> @@ -274,7 +279,7 @@ struct fuse_req *fuse_get_req_nofail_nopages(struct fuse_conn *fc,
>         if (!req)
>                 req = get_reserved_req(fc, file);
>
> -       fuse_req_init_context(req);
> +       fuse_req_init_context(fc, req);
>         __set_bit(FR_WAITING, &req->flags);
>         __clear_bit(FR_BACKGROUND, &req->flags);
>         return req;
> @@ -1243,6 +1248,9 @@ static ssize_t fuse_dev_do_read(struct fuse_dev *fud, struct file *file,
>         struct fuse_in *in;
>         unsigned reqsize;
>
> +       if (task_active_pid_ns(current) != fc->pid_ns)
> +               return -EIO;
> +
>   restart:
>         spin_lock(&fiq->waitq.lock);
>         err = -EAGAIN;
> @@ -1872,6 +1880,9 @@ static ssize_t fuse_dev_do_write(struct fuse_dev *fud,
>         struct fuse_req *req;
>         struct fuse_out_header oh;
>
> +       if (task_active_pid_ns(current) != fc->pid_ns)
> +               return -EIO;
> +
>         if (nbytes < sizeof(struct fuse_out_header))
>                 return -EINVAL;
>
> diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> index 719924d6c706..b5c616c5ec98 100644
> --- a/fs/fuse/file.c
> +++ b/fs/fuse/file.c
> @@ -2067,7 +2067,8 @@ static int fuse_direct_mmap(struct file *file, struct vm_area_struct *vma)
>         return generic_file_mmap(file, vma);
>  }
>
> -static int convert_fuse_file_lock(const struct fuse_file_lock *ffl,
> +static int convert_fuse_file_lock(struct fuse_conn *fc,
> +                                 const struct fuse_file_lock *ffl,
>                                   struct file_lock *fl)
>  {
>         switch (ffl->type) {
> @@ -2082,7 +2083,14 @@ static int convert_fuse_file_lock(const struct fuse_file_lock *ffl,
>
>                 fl->fl_start = ffl->start;
>                 fl->fl_end = ffl->end;
> -               fl->fl_pid = ffl->pid;
> +
> +               /*
> +                * Convert pid into the caller's pid namespace. If the pid
> +                * does not map into the namespace fl_pid will get set to 0.
> +                */
> +               rcu_read_lock();
> +               fl->fl_pid = pid_vnr(find_pid_ns(ffl->pid, fc->pid_ns));
> +               rcu_read_unlock();
>                 break;
>
>         default:
> @@ -2131,7 +2139,7 @@ static int fuse_getlk(struct file *file, struct file_lock *fl)
>         args.out.args[0].value = &outarg;
>         err = fuse_simple_request(fc, &args);
>         if (!err)
> -               err = convert_fuse_file_lock(&outarg.lk, fl);
> +               err = convert_fuse_file_lock(fc, &outarg.lk, fl);
>
>         return err;
>  }
> @@ -2143,7 +2151,8 @@ static int fuse_setlk(struct file *file, struct file_lock *fl, int flock)
>         FUSE_ARGS(args);
>         struct fuse_lk_in inarg;
>         int opcode = (fl->fl_flags & FL_SLEEP) ? FUSE_SETLKW : FUSE_SETLK;
> -       pid_t pid = fl->fl_type != F_UNLCK ? current->tgid : 0;
> +       struct pid *pid = fl->fl_type != F_UNLCK ? task_tgid(current) : NULL;
> +       pid_t pid_nr = pid_nr_ns(pid, fc->pid_ns);
>         int err;
>
>         if (fl->fl_lmops && fl->fl_lmops->lm_grant) {
> @@ -2155,7 +2164,10 @@ static int fuse_setlk(struct file *file, struct file_lock *fl, int flock)
>         if (fl->fl_flags & FL_CLOSE)
>                 return 0;
>
> -       fuse_lk_fill(&args, file, fl, opcode, pid, flock, &inarg);
> +       if (pid && pid_nr == 0)
> +               return -EOVERFLOW;
> +
> +       fuse_lk_fill(&args, file, fl, opcode, pid_nr, flock, &inarg);
>         err = fuse_simple_request(fc, &args);
>
>         /* locking is restartable */
> diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
> index eddbe02c4028..9145445a759a 100644
> --- a/fs/fuse/fuse_i.h
> +++ b/fs/fuse/fuse_i.h
> @@ -23,6 +23,7 @@
>  #include <linux/poll.h>
>  #include <linux/workqueue.h>
>  #include <linux/kref.h>
> +#include <linux/pid_namespace.h>
>
>  /** Max number of pages that can be used in a single read request */
>  #define FUSE_MAX_PAGES_PER_REQ 32
> @@ -465,6 +466,9 @@ struct fuse_conn {
>         /** The group id for this mount */
>         kgid_t group_id;
>
> +       /** The pid namespace for this mount */
> +       struct pid_namespace *pid_ns;
> +
>         /** The fuse mount flags for this mount */
>         unsigned flags;
>
> diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
> index 1ce67668a8e1..eade0bfa4488 100644
> --- a/fs/fuse/inode.c
> +++ b/fs/fuse/inode.c
> @@ -20,6 +20,7 @@
>  #include <linux/random.h>
>  #include <linux/sched.h>
>  #include <linux/exportfs.h>
> +#include <linux/pid_namespace.h>
>
>  MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
>  MODULE_DESCRIPTION("Filesystem in Userspace");
> @@ -609,6 +610,7 @@ void fuse_conn_init(struct fuse_conn *fc)
>         fc->connected = 1;
>         fc->attr_version = 1;
>         get_random_bytes(&fc->scramble_key, sizeof(fc->scramble_key));
> +       fc->pid_ns = get_pid_ns(task_active_pid_ns(current));
>  }
>  EXPORT_SYMBOL_GPL(fuse_conn_init);
>
> @@ -617,6 +619,7 @@ void fuse_conn_put(struct fuse_conn *fc)
>         if (atomic_dec_and_test(&fc->count)) {
>                 if (fc->destroy_req)
>                         fuse_request_free(fc->destroy_req);
> +               put_pid_ns(fc->pid_ns);
>                 fc->release(fc);
>         }
>  }
> --
> 2.7.4
>
Seth Forshee July 20, 2016, 12:52 p.m. UTC | #2
On Tue, Jul 19, 2016 at 07:44:11PM -0700, Sheng Yang wrote:
> On Tue, Apr 26, 2016 at 12:36 PM, Seth Forshee
> <seth.forshee@canonical.com> wrote:
> > When the userspace process servicing fuse requests is running in
> > a pid namespace then pids passed via the fuse fd are not being
> > translated into that process' namespace. Translation is necessary
> > for the pid to be useful to that process.
> >
> > Since no use case currently exists for changing namespaces all
> > translations can be done relative to the pid namespace in use
> > when fuse_conn_init() is called. For fuse this translates to
> > mount time, and for cuse this is when /dev/cuse is opened. IO for
> > this connection from another namespace will return errors.
> >
> > Requests from processes whose pid cannot be translated into the
> > target namespace are not permitted, except for requests
> > allocated via fuse_get_req_nofail_nopages. For no-fail requests
> > in.h.pid will be 0 if the pid translation fails.
> 
> Hi Seth,
> 
> This patch caused a regression in our major container use case with
> FUSE in Ubuntu 16.04, as patch was checked in as Ubuntu Sauce in
> Ubuntu 4.4.0-6.21 kernel.
> 
> The use case is:
> 1. Create a Docker container.
> 2. Inside the container, start the FUSE backend, and mounted fs.
> 3. Following step 2 in the container, create a loopback device to map
> a file in the mounted fuse to create a block device, which will be
> available to the whole system.
> 
> It works well before this commit.
> 
> The use case is broken because no matter which namespace losetup runs,
> the real request from loopback device seems always come from init ns,
> thus it will be in different ns running fuse backend. So the request
> will got denied, because the ns running fuse won't able to see the
> things from higher level(level 0 in fact) pid namespace.
> 
> I think since init pid ns has ability to access any process in the
> system, it should able to access the fuse mounted by any pid namespace
> process as well.
> 
> What you think?

It sounds like we need to remove the restriction on accessing the
filesystem from a different pid namespace. I don't think this poses a
security problem. However there's no pid mapping that is usable by the
userspace fuse process, so what do we put in the fuse request? Probably
the only candidates are 0 and 0xffffffff.

So a question for the fuse developers - is one value or the other
preferrable for fuse_in_header.pid when the pid cannot be mapped, and is
this going to cause problems for any fuse filesystems? I suspect that
few filesystems actually look at the pid anyway, and already for a
filesystem mounted in a pid namespace the values being given to
userspace won't be correct for the namespace of the fuse process.

Seth
Sheng Yang July 20, 2016, 10:28 p.m. UTC | #3
On Wed, Jul 20, 2016 at 5:52 AM, Seth Forshee
<seth.forshee@canonical.com> wrote:
> On Tue, Jul 19, 2016 at 07:44:11PM -0700, Sheng Yang wrote:
>> On Tue, Apr 26, 2016 at 12:36 PM, Seth Forshee
>> <seth.forshee@canonical.com> wrote:
>> > When the userspace process servicing fuse requests is running in
>> > a pid namespace then pids passed via the fuse fd are not being
>> > translated into that process' namespace. Translation is necessary
>> > for the pid to be useful to that process.
>> >
>> > Since no use case currently exists for changing namespaces all
>> > translations can be done relative to the pid namespace in use
>> > when fuse_conn_init() is called. For fuse this translates to
>> > mount time, and for cuse this is when /dev/cuse is opened. IO for
>> > this connection from another namespace will return errors.
>> >
>> > Requests from processes whose pid cannot be translated into the
>> > target namespace are not permitted, except for requests
>> > allocated via fuse_get_req_nofail_nopages. For no-fail requests
>> > in.h.pid will be 0 if the pid translation fails.
>>
>> Hi Seth,
>>
>> This patch caused a regression in our major container use case with
>> FUSE in Ubuntu 16.04, as patch was checked in as Ubuntu Sauce in
>> Ubuntu 4.4.0-6.21 kernel.
>>
>> The use case is:
>> 1. Create a Docker container.
>> 2. Inside the container, start the FUSE backend, and mounted fs.
>> 3. Following step 2 in the container, create a loopback device to map
>> a file in the mounted fuse to create a block device, which will be
>> available to the whole system.
>>
>> It works well before this commit.
>>
>> The use case is broken because no matter which namespace losetup runs,
>> the real request from loopback device seems always come from init ns,
>> thus it will be in different ns running fuse backend. So the request
>> will got denied, because the ns running fuse won't able to see the
>> things from higher level(level 0 in fact) pid namespace.
>>
>> I think since init pid ns has ability to access any process in the
>> system, it should able to access the fuse mounted by any pid namespace
>> process as well.
>>
>> What you think?
>
> It sounds like we need to remove the restriction on accessing the
> filesystem from a different pid namespace. I don't think this poses a
> security problem. However there's no pid mapping that is usable by the
> userspace fuse process, so what do we put in the fuse request? Probably
> the only candidates are 0 and 0xffffffff.

Thanks Seth, I don't think it will be a security problem either, if we
remove the restriction.

>
> So a question for the fuse developers - is one value or the other
> preferrable for fuse_in_header.pid when the pid cannot be mapped, and is
> this going to cause problems for any fuse filesystems? I suspect that
> few filesystems actually look at the pid anyway, and already for a
> filesystem mounted in a pid namespace the values being given to
> userspace won't be correct for the namespace of the fuse process.
>

At least in our system we're not looking into the pid at all.

--Sheng

> Seth
>
Miklos Szeredi July 21, 2016, 7:25 a.m. UTC | #4
On Wed, Jul 20, 2016 at 2:52 PM, Seth Forshee
<seth.forshee@canonical.com> wrote:

> It sounds like we need to remove the restriction on accessing the
> filesystem from a different pid namespace. I don't think this poses a
> security problem. However there's no pid mapping that is usable by the
> userspace fuse process, so what do we put in the fuse request? Probably
> the only candidates are 0 and 0xffffffff.
>
> So a question for the fuse developers - is one value or the other
> preferrable for fuse_in_header.pid when the pid cannot be mapped, and is
> this going to cause problems for any fuse filesystems? I suspect that
> few filesystems actually look at the pid anyway, and already for a
> filesystem mounted in a pid namespace the values being given to
> userspace won't be correct for the namespace of the fuse process.

pid = 0 sounds good.

The pid from the request is used for example to get the auxiliary
group list by libfuse (fuse_req_getgroups()).   That's not used by all
filesystems and it will return an error in case it can't find the proc
entry (which it won't for pid == 0).

It would be nice if we could transfer the group list through the
userspace/kernel protocol, since then it wouldn't depend on proc and
on being in the same pid namespace.  But that's another story.

Thanks,
Miklos
diff mbox

Patch

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index cbece1221417..4e91b2ac25a7 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -19,6 +19,7 @@ 
 #include <linux/pipe_fs_i.h>
 #include <linux/swap.h>
 #include <linux/splice.h>
+#include <linux/sched.h>
 
 MODULE_ALIAS_MISCDEV(FUSE_MINOR);
 MODULE_ALIAS("devname:fuse");
@@ -124,11 +125,11 @@  static void __fuse_put_request(struct fuse_req *req)
 	atomic_dec(&req->count);
 }
 
-static void fuse_req_init_context(struct fuse_req *req)
+static void fuse_req_init_context(struct fuse_conn *fc, struct fuse_req *req)
 {
 	req->in.h.uid = from_kuid_munged(&init_user_ns, current_fsuid());
 	req->in.h.gid = from_kgid_munged(&init_user_ns, current_fsgid());
-	req->in.h.pid = current->pid;
+	req->in.h.pid = pid_nr_ns(task_pid(current), fc->pid_ns);
 }
 
 void fuse_set_initialized(struct fuse_conn *fc)
@@ -181,10 +182,14 @@  static struct fuse_req *__fuse_get_req(struct fuse_conn *fc, unsigned npages,
 		goto out;
 	}
 
-	fuse_req_init_context(req);
+	fuse_req_init_context(fc, req);
 	__set_bit(FR_WAITING, &req->flags);
 	if (for_background)
 		__set_bit(FR_BACKGROUND, &req->flags);
+	if (req->in.h.pid == 0) {
+		fuse_put_request(fc, req);
+		return ERR_PTR(-EOVERFLOW);
+	}
 
 	return req;
 
@@ -274,7 +279,7 @@  struct fuse_req *fuse_get_req_nofail_nopages(struct fuse_conn *fc,
 	if (!req)
 		req = get_reserved_req(fc, file);
 
-	fuse_req_init_context(req);
+	fuse_req_init_context(fc, req);
 	__set_bit(FR_WAITING, &req->flags);
 	__clear_bit(FR_BACKGROUND, &req->flags);
 	return req;
@@ -1243,6 +1248,9 @@  static ssize_t fuse_dev_do_read(struct fuse_dev *fud, struct file *file,
 	struct fuse_in *in;
 	unsigned reqsize;
 
+	if (task_active_pid_ns(current) != fc->pid_ns)
+		return -EIO;
+
  restart:
 	spin_lock(&fiq->waitq.lock);
 	err = -EAGAIN;
@@ -1872,6 +1880,9 @@  static ssize_t fuse_dev_do_write(struct fuse_dev *fud,
 	struct fuse_req *req;
 	struct fuse_out_header oh;
 
+	if (task_active_pid_ns(current) != fc->pid_ns)
+		return -EIO;
+
 	if (nbytes < sizeof(struct fuse_out_header))
 		return -EINVAL;
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 719924d6c706..b5c616c5ec98 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2067,7 +2067,8 @@  static int fuse_direct_mmap(struct file *file, struct vm_area_struct *vma)
 	return generic_file_mmap(file, vma);
 }
 
-static int convert_fuse_file_lock(const struct fuse_file_lock *ffl,
+static int convert_fuse_file_lock(struct fuse_conn *fc,
+				  const struct fuse_file_lock *ffl,
 				  struct file_lock *fl)
 {
 	switch (ffl->type) {
@@ -2082,7 +2083,14 @@  static int convert_fuse_file_lock(const struct fuse_file_lock *ffl,
 
 		fl->fl_start = ffl->start;
 		fl->fl_end = ffl->end;
-		fl->fl_pid = ffl->pid;
+
+		/*
+		 * Convert pid into the caller's pid namespace. If the pid
+		 * does not map into the namespace fl_pid will get set to 0.
+		 */
+		rcu_read_lock();
+		fl->fl_pid = pid_vnr(find_pid_ns(ffl->pid, fc->pid_ns));
+		rcu_read_unlock();
 		break;
 
 	default:
@@ -2131,7 +2139,7 @@  static int fuse_getlk(struct file *file, struct file_lock *fl)
 	args.out.args[0].value = &outarg;
 	err = fuse_simple_request(fc, &args);
 	if (!err)
-		err = convert_fuse_file_lock(&outarg.lk, fl);
+		err = convert_fuse_file_lock(fc, &outarg.lk, fl);
 
 	return err;
 }
@@ -2143,7 +2151,8 @@  static int fuse_setlk(struct file *file, struct file_lock *fl, int flock)
 	FUSE_ARGS(args);
 	struct fuse_lk_in inarg;
 	int opcode = (fl->fl_flags & FL_SLEEP) ? FUSE_SETLKW : FUSE_SETLK;
-	pid_t pid = fl->fl_type != F_UNLCK ? current->tgid : 0;
+	struct pid *pid = fl->fl_type != F_UNLCK ? task_tgid(current) : NULL;
+	pid_t pid_nr = pid_nr_ns(pid, fc->pid_ns);
 	int err;
 
 	if (fl->fl_lmops && fl->fl_lmops->lm_grant) {
@@ -2155,7 +2164,10 @@  static int fuse_setlk(struct file *file, struct file_lock *fl, int flock)
 	if (fl->fl_flags & FL_CLOSE)
 		return 0;
 
-	fuse_lk_fill(&args, file, fl, opcode, pid, flock, &inarg);
+	if (pid && pid_nr == 0)
+		return -EOVERFLOW;
+
+	fuse_lk_fill(&args, file, fl, opcode, pid_nr, flock, &inarg);
 	err = fuse_simple_request(fc, &args);
 
 	/* locking is restartable */
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index eddbe02c4028..9145445a759a 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -23,6 +23,7 @@ 
 #include <linux/poll.h>
 #include <linux/workqueue.h>
 #include <linux/kref.h>
+#include <linux/pid_namespace.h>
 
 /** Max number of pages that can be used in a single read request */
 #define FUSE_MAX_PAGES_PER_REQ 32
@@ -465,6 +466,9 @@  struct fuse_conn {
 	/** The group id for this mount */
 	kgid_t group_id;
 
+	/** The pid namespace for this mount */
+	struct pid_namespace *pid_ns;
+
 	/** The fuse mount flags for this mount */
 	unsigned flags;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 1ce67668a8e1..eade0bfa4488 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -20,6 +20,7 @@ 
 #include <linux/random.h>
 #include <linux/sched.h>
 #include <linux/exportfs.h>
+#include <linux/pid_namespace.h>
 
 MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
 MODULE_DESCRIPTION("Filesystem in Userspace");
@@ -609,6 +610,7 @@  void fuse_conn_init(struct fuse_conn *fc)
 	fc->connected = 1;
 	fc->attr_version = 1;
 	get_random_bytes(&fc->scramble_key, sizeof(fc->scramble_key));
+	fc->pid_ns = get_pid_ns(task_active_pid_ns(current));
 }
 EXPORT_SYMBOL_GPL(fuse_conn_init);
 
@@ -617,6 +619,7 @@  void fuse_conn_put(struct fuse_conn *fc)
 	if (atomic_dec_and_test(&fc->count)) {
 		if (fc->destroy_req)
 			fuse_request_free(fc->destroy_req);
+		put_pid_ns(fc->pid_ns);
 		fc->release(fc);
 	}
 }