mbox series

[0/6] spi: multi CS cleanup and controller CS limit removal

Message ID 20241012-spi_multi_cs_cleanup-v1-0-dc491113880d@gmail.com (mailing list archive)
Headers show
Series spi: multi CS cleanup and controller CS limit removal | expand

Message

Jonas Gorski Oct. 12, 2024, 9:53 a.m. UTC
This series aims at cleaning up the current multi CS parts and removing
the CS limit per controller that was introduced with the multi CS
support.

To do this, store the assigned chip selects per device in
spi_device::num_chipselects, which allows us to use that instead of
SPI_CS_CNT_MAX for most loops, as well as remove the initialization to
and the check for SPI_INVALID_CS.

This should hopefully make it obvious that SPI_CS_CNT_MAX only limits
accesses to arrays indexed by the number of chip selects of a device, not
the controller, and we can remove the check for
spi_controller::num_chipselects being less than SPI_CS_CNT_MAX in device
registration (which was the wrong place to do that anyway).

After having done that, we can reduce SPI_CS_CNT_MAX again to 4 without
breaking devices on higher CS lines.

Finally, rename SPI_CS_CNT_MAX to SPI_DEVICE_CNT_MAX to make it more
clear that this limit only applies to devices, not controllers.

There are still more issues left, but these can be addressed in future
submissions:

* The code allows multi-cs devices for any controller, as long as the
  device does not set parallel-memories.
* No current spi controller driver handles logical chip selects other
  than the first one, and always use it, regardless what cs_index_mask
  says.
* While most spi controllers should be able to handle devices that have
  multiple cs that just get enables selectively, but not at the same
  time, there is no way to tell that to the core (ties into the above).
* There is no parallel memories/multi cs flag for devices, so any
  implementing driver needs to check the device tree node, making it
  impossible to register these kind of devices via code.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
Jonas Gorski (6):
      spi: fix return code when spi device has too many chipselects
      spi: keep track of number of chipselects in spi_device
      spi: do not initialize device chipselects to SPI_INVALID_CS
      spi: don't check spi_controller::num_chipselect when parsing a dt device
      Revert "spi: Raise limit on number of chip selects"
      spi: rename SPI_CS_CNT_MAX => SPI_DEVICE_CS_CNT_MAX

 drivers/spi/spi-cadence-quadspi.c |  2 +-
 drivers/spi/spi.c                 | 71 +++++++++++++++------------------------
 include/linux/spi/spi.h           | 17 ++++++----
 3 files changed, 39 insertions(+), 51 deletions(-)
---
base-commit: c2a59c892f20379a3e48124a83491a12374cd7e0
change-id: 20241010-spi_multi_cs_cleanup-28b1a1516933

Best regards,