diff mbox

[v2,4/6] mtd: m25p80: add a read function to read page by page

Message ID 1280735524-17547-5-git-send-email-Mingkai.hu@freescale.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Hu Mingkai-B21284 Aug. 2, 2010, 7:52 a.m. UTC
None
diff mbox

Patch

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 5f00075..30e4568 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -376,6 +376,81 @@  static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 }
 
 /*
+ * Read an address range from the flash chip page by page.
+ * Some controller has transaction length limitation such as the
+ * Freescale's eSPI controller can only trasmit 0xFFFF bytes one
+ * time, so we have to read page by page if the len is more than
+ * the limitation.
+ */
+static int m25p80_page_read(struct mtd_info *mtd, loff_t from, size_t len,
+	size_t *retlen, u_char *buf)
+{
+	struct m25p *flash = mtd_to_m25p(mtd);
+	struct spi_transfer t[2];
+	struct spi_message m;
+	u32 i, page_size = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
+			dev_name(&flash->spi->dev), __func__, "from",
+			(u32)from, len);
+
+	/* sanity checks */
+	if (!len)
+		return 0;
+
+	if (from + len > flash->mtd.size)
+		return -EINVAL;
+
+	spi_message_init(&m);
+	memset(t, 0, (sizeof t));
+
+	/* NOTE:
+	 * OPCODE_FAST_READ (if available) is faster.
+	 * Should add 1 byte DUMMY_BYTE.
+	 */
+	t[0].tx_buf = flash->command;
+	t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	spi_message_add_tail(&t[1], &m);
+
+	/* Byte count starts at zero. */
+	if (retlen)
+		*retlen = 0;
+
+	mutex_lock(&flash->lock);
+
+	/* Wait till previous write/erase is done. */
+	if (wait_till_ready(flash)) {
+		/* REVISIT status return?? */
+		mutex_unlock(&flash->lock);
+		return 1;
+	}
+
+	/* Set up the write data buffer. */
+	flash->command[0] = OPCODE_READ;
+
+	for (i = page_size; i < len; i += page_size) {
+		page_size = len - i;
+		if (page_size > flash->page_size)
+			page_size = flash->page_size;
+		m25p_addr2cmd(flash, from + i, flash->command);
+		t[1].len = page_size;
+		t[1].rx_buf = buf + i;
+
+		spi_sync(flash->spi, &m);
+
+		*retlen += m.actual_length - m25p_cmdsz(flash)
+			- FAST_READ_DUMMY_BYTE;
+	}
+
+	mutex_unlock(&flash->lock);
+
+	return 0;
+}
+
+/*
  * Write an address range to the flash chip.  Data must be written in
  * FLASH_PAGESIZE chunks.  The address range may be any size provided
  * it is within the physical boundaries.
@@ -877,6 +952,9 @@  static int __devinit m25p_probe(struct spi_device *spi)
 	flash->mtd.erase = m25p80_erase;
 	flash->mtd.read = m25p80_read;
 
+	if (spi->master->flags & SPI_MASTER_TRANS_LIMIT)
+		flash->mtd.read = m25p80_page_read;
+
 	/* sst flash chips use AAI word program */
 	if (info->jedec_id >> 16 == 0xbf)
 		flash->mtd.write = sst_write;
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index 61987cf..e15b7dc 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -470,6 +470,7 @@  static struct spi_master * __devinit fsl_espi_probe(struct device *dev,
 		goto err_probe;
 
 	master->setup = fsl_espi_setup;
+	master->flags = SPI_MASTER_TRANS_LIMIT;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
 	mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index af56071..0729cbd 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -261,6 +261,7 @@  struct spi_master {
 #define SPI_MASTER_HALF_DUPLEX	BIT(0)		/* can't do full duplex */
 #define SPI_MASTER_NO_RX	BIT(1)		/* can't do buffer read */
 #define SPI_MASTER_NO_TX	BIT(2)		/* can't do buffer write */
+#define SPI_MASTER_TRANS_LIMIT	BIT(3)		/* have trans length limit */
 
 	/* Setup mode and clock, etc (spi driver may call many times).
 	 *