diff mbox

[2/5] spi-topcliff-pch: Fix SSN Control issue

Message ID 1315295914-6862-2-git-send-email-tomoya-linux@dsn.okisemi.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Tomoya Sept. 6, 2011, 7:58 a.m. UTC
During processing 1 command/data series,
SSN should keep LOW.
However, currently, SSN becomes HIGH.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
 drivers/spi/spi-topcliff-pch.c |   10 +++-------
 1 files changed, 3 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 1b98b7e..b5c681a 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -58,6 +58,7 @@ 
 #define PCH_SLEEP_TIME		10
 
 #define SSN_LOW			0x02U
+#define SSN_HIGH		0x03U
 #define SSN_NO_CONTROL		0x00U
 #define PCH_MAX_CS		0xFF
 #define PCI_DEVICE_ID_GE_SPI	0x8816
@@ -758,10 +759,6 @@  static void pch_spi_set_ir(struct pch_spi_data *data)
 
 	wait_event_interruptible(data->wait, data->transfer_complete);
 
-	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
-	dev_dbg(&data->master->dev,
-		"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
-
 	/* clear all interrupts */
 	pch_spi_writereg(data->master, PCH_SPSR,
 			 pch_spi_readreg(data->master, PCH_SPSR));
@@ -850,9 +847,6 @@  static void pch_spi_start_transfer(struct pch_spi_data *data)
 	kfree(dma->sg_rx_p);
 
 	spin_lock_irqsave(&data->lock, flags);
-	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
-	dev_dbg(&data->master->dev,
-		"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
 
 	/* clear fifo threshold, disable interrupts, disable SPI transfer */
 	pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
@@ -1162,6 +1156,7 @@  static void pch_spi_process_messages(struct work_struct *pwork)
 	if (data->use_dma)
 		pch_spi_request_dma(data,
 				    data->current_msg->spi->bits_per_word);
+	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
 	do {
 		/* If we are already processing a message get the next
 		transfer structure from the message otherwise retrieve
@@ -1220,6 +1215,7 @@  static void pch_spi_process_messages(struct work_struct *pwork)
 
 	} while (data->cur_trans != NULL);
 
+	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
 	if (data->use_dma)
 		pch_spi_release_dma(data);
 }