From patchwork Mon Mar 4 16:34:33 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: larsi@wh2.tu-dresden.de X-Patchwork-Id: 2213431 Return-Path: X-Original-To: patchwork-spi-devel-general@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from lists.sourceforge.net (lists.sourceforge.net [216.34.181.88]) by patchwork2.kernel.org (Postfix) with ESMTP id AA1C7DF2F2 for ; Mon, 4 Mar 2013 16:53:51 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=sfs-ml-1.v29.ch3.sourceforge.com) by sfs-ml-1.v29.ch3.sourceforge.com with esmtp (Exim 4.76) (envelope-from ) id 1UCYe6-0001Hx-Jl; Mon, 04 Mar 2013 16:53:50 +0000 Received: from sog-mx-3.v43.ch3.sourceforge.com ([172.29.43.193] helo=mx.sourceforge.net) by sfs-ml-1.v29.ch3.sourceforge.com with esmtp (Exim 4.76) (envelope-from ) id 1UCYe4-0001Hi-9q for spi-devel-general@lists.sourceforge.net; Mon, 04 Mar 2013 16:53:48 +0000 X-ACL-Warn: Received: from atlantis.wh2.tu-dresden.de ([141.30.228.39]) by sog-mx-3.v43.ch3.sourceforge.com with esmtp (Exim 4.76) id 1UCYe0-0006Sg-SS for spi-devel-general@lists.sourceforge.net; Mon, 04 Mar 2013 16:53:48 +0000 Received: from lem-wkst-02.routerb3c0c6.com (p50998852.dip0.t-ipconnect.de [80.153.136.82]) by atlantis.wh2.tu-dresden.de (Postfix) with ESMTPA id 62E6083A6B6; Mon, 4 Mar 2013 17:33:54 +0100 (CET) From: Lars Poeschel To: poeschel@lemonage.de, grant.likely@secretlab.ca, rob.herring@calxeda.com, rob@landley.net, linus.walleij@linaro.org, devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, spi-devel-general@lists.sourceforge.net Subject: [PATCH v3] gpio: mcp23s08: convert driver to DT Date: Mon, 4 Mar 2013 17:34:33 +0100 Message-Id: <1362414873-17676-1-git-send-email-larsi@wh2.tu-dresden.de> X-Mailer: git-send-email 1.7.10.4 X-Spam-Score: -0.6 (/) X-Spam-Report: Spam Filtering performed by mx.sourceforge.net. See http://spamassassin.org/tag/ for more details. -0.6 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain X-Headers-End: 1UCYe0-0006Sg-SS X-BeenThere: spi-devel-general@lists.sourceforge.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: Linux SPI core/device drivers discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: spi-devel-general-bounces@lists.sourceforge.net From: Lars Poeschel This converts the mcp23s08 driver to be able to be used with device tree. There is a "spi-present-mask" device tree property, that allows to use multiple of this spi chips on the same chipselect. Signed-off-by: Lars Poeschel --- v3: - removed mcp,chips device tree property in favour of a mcp,spi-present-mask and a flag for the pullup of every gpio - seperated the match table. Now there is one for i2c and one for spi - do the of reading stuff on stack of the probe function - no devm any more v2: - squashed booth patches together - fixed build warning, when CONFIG_OF is not defined - use of_match_ptr macro for of_match_table create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt new file mode 100644 index 0000000..99a2985 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -0,0 +1,43 @@ +Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for +8-/16-bit I/O expander with serial interface (I2C/SPI) + +Required properties: +- compatible : Should be + - "mcp,mcp23s08" for 8 GPIO SPI version + - "mcp,mcp23s17" for 16 GPIO SPI version + - "mcp,mcp23008" for 8 GPIO I2C version or + - "mcp,mcp23017" for 16 GPIO I2C version of the chip +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. Flags currently used: + bit0 : activate a ~100k pullup +- gpio-controller : Marks the device node as a GPIO controller. +- reg : For an address on its bus + +Required device specific properties (only for SPI chips): +- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI + chips - as the name suggests. Multiple chips can share the same + SPI chipselect. Set bit 0-7 in this mask to 1 if there is a chip + connected with this spi address. If you have a chip with address 3 + connected, you have to set bit3 to 1, which is 0x08. mcp23s08 only + supports bits 0-3. It is not possible to mix mcp23s08 and mcp23s17 + on the same chipselect. Set at least one bit to 1 for SPI chips. +- spi-max-frequency = The maximum frequency this chip is able to handle + +Example I2C: +gpiom1: gpio@20 { + compatible = "mcp,mcp23017"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; +}; + +Example SPI: +gpiom1: gpio@0 { + compatible = "mcp,mcp23s17"; + gpio-controller; + #gpio-cells = <2>; + spi-present-mask = <0x01>; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 3cea0ea..a8ca469 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include /** * MCP types supported by driver @@ -21,6 +23,11 @@ #define MCP_TYPE_008 2 #define MCP_TYPE_017 3 +/** + * Flags used in device tree + */ +#define MCP_DT_FLAG_PULLUP 0x01 + /* Registers are all 8 bits wide. * * The mcp23s17 has twice as many bits, and can be configured to work @@ -75,6 +82,25 @@ struct mcp23s08_driver_data { struct mcp23s08 chip[]; }; +#ifdef CONFIG_OF +static int mcp23s08_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags); + +static int mcp23s08_set_pullup(struct mcp23s08 *mcp, unsigned offset) +{ + int status; + u16 value; + + mutex_lock(&mcp->lock); + value = mcp->cache[MCP_GPPU] | (1 << offset); + status = mcp->ops->write(mcp, MCP_GPPU, value); + if (!status) + mcp->cache[MCP_GPPU] = value; + mutex_unlock(&mcp->lock); + + return status; +} +#endif /* CONFIG_OF */ /*----------------------------------------------------------------------*/ #if IS_ENABLED(CONFIG_I2C) @@ -383,6 +409,11 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, mcp->chip.direction_output = mcp23s08_direction_output; mcp->chip.set = mcp23s08_set; mcp->chip.dbg_show = mcp23s08_dbg_show; +#ifdef CONFIG_OF + mcp->chip.of_xlate = mcp23s08_of_xlate; + mcp->chip.of_gpio_n_cells = 2; + mcp->chip.of_node = dev->of_node; +#endif switch (type) { #ifdef CONFIG_SPI_MASTER @@ -473,6 +504,50 @@ fail: /*----------------------------------------------------------------------*/ +#ifdef CONFIG_OF +#ifdef CONFIG_SPI_MASTER +static struct of_device_id mcp23s08_spi_of_match[] = { + { + .compatible = "mcp,mcp23s08", .data = (void *) MCP_TYPE_S08, + }, + { + .compatible = "mcp,mcp23s17", .data = (void *) MCP_TYPE_S17, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match); +#endif + +#if IS_ENABLED(CONFIG_I2C) +static struct of_device_id mcp23s08_i2c_of_match[] = { + { + .compatible = "mcp,mcp23008", .data = (void *) MCP_TYPE_008, + }, + { + .compatible = "mcp,mcp23017", .data = (void *) MCP_TYPE_017, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match); +#endif + +static int mcp23s08_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + struct mcp23s08 *mcp = container_of(gc, struct mcp23s08, chip); + + if (flags) + *flags = gpiospec->args[1]; + + if (gpiospec->args[1] & MCP_DT_FLAG_PULLUP) + mcp23s08_set_pullup(mcp, gpiospec->args[0]); + + return gpiospec->args[0]; +} + +#endif /* CONFIG_OF */ + + #if IS_ENABLED(CONFIG_I2C) static int mcp230xx_probe(struct i2c_client *client, @@ -480,12 +555,23 @@ static int mcp230xx_probe(struct i2c_client *client, { struct mcp23s08_platform_data *pdata; struct mcp23s08 *mcp; - int status; - - pdata = client->dev.platform_data; - if (!pdata || !gpio_is_valid(pdata->base)) { - dev_dbg(&client->dev, "invalid or missing platform data\n"); - return -EINVAL; + int status, base, pullups; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match), + &client->dev); + if (match) { + base = -1; + pullups = 0; + } else { + pdata = client->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&client->dev, + "invalid or missing platform data\n"); + return -EINVAL; + } + base = pdata->base; + pullups = pdata->chip[0].pullups; } mcp = kzalloc(sizeof *mcp, GFP_KERNEL); @@ -493,8 +579,7 @@ static int mcp230xx_probe(struct i2c_client *client, return -ENOMEM; status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, - id->driver_data, pdata->base, - pdata->chip[0].pullups); + id->driver_data, base, pullups); if (status) goto fail; @@ -531,6 +616,7 @@ static struct i2c_driver mcp230xx_driver = { .driver = { .name = "mcp230xx", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mcp23s08_i2c_of_match), }, .probe = mcp230xx_probe, .remove = mcp230xx_remove, @@ -565,28 +651,55 @@ static int mcp23s08_probe(struct spi_device *spi) unsigned chips = 0; struct mcp23s08_driver_data *data; int status, type; - unsigned base; - - type = spi_get_device_id(spi)->driver_data; - - pdata = spi->dev.platform_data; - if (!pdata || !gpio_is_valid(pdata->base)) { - dev_dbg(&spi->dev, "invalid or missing platform data\n"); - return -EINVAL; - } + unsigned base = -1, + ngpio = 0, + pullups[ARRAY_SIZE(pdata->chip)]; + const struct of_device_id *match; + u32 spi_present_mask = 0; + + match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev); + if (match) { + type = (int)match->data; + status = of_property_read_u32(spi->dev.of_node, + "mcp,spi-present-mask", &spi_present_mask); + if (status) { + dev_err(&spi->dev, "DT has no spi-present-mask\n"); + return -ENODEV; + } + if ((spi_present_mask <= 0) || (spi_present_mask >= 256)) { + dev_err(&spi->dev, "invalid spi-present-mask\n"); + return -ENODEV; + } - for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { - if (!pdata->chip[addr].is_present) - continue; - chips++; - if ((type == MCP_TYPE_S08) && (addr > 3)) { - dev_err(&spi->dev, - "mcp23s08 only supports address 0..3\n"); + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) + pullups[addr] = 0; + } else { + type = spi_get_device_id(spi)->driver_data; + pdata = spi->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&spi->dev, + "invalid or missing platform data\n"); return -EINVAL; } + + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { + if (!pdata->chip[addr].is_present) + continue; + chips++; + if ((type == MCP_TYPE_S08) && (addr > 3)) { + dev_err(&spi->dev, + "mcp23s08 only supports address 0..3\n"); + return -EINVAL; + } + spi_present_mask |= 1 << addr; + pullups[addr] = pdata->chip[addr].pullups; + } + + if (!chips) + return -ENODEV; + + base = pdata->base; } - if (!chips) - return -ENODEV; data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08), GFP_KERNEL); @@ -594,21 +707,22 @@ static int mcp23s08_probe(struct spi_device *spi) return -ENOMEM; spi_set_drvdata(spi, data); - base = pdata->base; for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { - if (!pdata->chip[addr].is_present) + if (!(spi_present_mask & (1 << addr))) continue; chips--; data->mcp[addr] = &data->chip[chips]; status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, 0x40 | (addr << 1), type, base, - pdata->chip[addr].pullups); + pullups[addr]); if (status < 0) goto fail; - base += (type == MCP_TYPE_S17) ? 16 : 8; + if (base != -1) + base += (type == MCP_TYPE_S17) ? 16 : 8; + ngpio += (type == MCP_TYPE_S17) ? 16 : 8; } - data->ngpio = base - pdata->base; + data->ngpio = ngpio; /* NOTE: these chips have a relatively sane IRQ framework, with * per-signal masking and level/edge triggering. It's not yet @@ -668,6 +782,7 @@ static struct spi_driver mcp23s08_driver = { .driver = { .name = "mcp23s08", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mcp23s08_spi_of_match), }, };