diff mbox

[2/2] spi: clps711x: dts: Add bindings documentation for the CLPS711X SPI

Message ID 1388556609-11040-1-git-send-email-shc_work@mail.ru (mailing list archive)
State Changes Requested
Headers show

Commit Message

Alexander Shiyan Jan. 1, 2014, 6:10 a.m. UTC
This patch adds the devicetree documentation for the
Cirrus Logic CLPS711X SPI.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 .../devicetree/bindings/spi/spi-clps711x.txt       | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-clps711x.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
new file mode 100644
index 0000000..aa16903
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
@@ -0,0 +1,22 @@ 
+* ARM CLPS711X Serial Peripheral Interface (SPI)
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-spi".
+- reg: Offset and length of the register set for the device.
+- interrupts: Should contain SPI interrupt.
+- clocks: Phandle to SPI clock.
+- syscon: Phandle to SYSCON node used for SPI control (SYSCON3).
+- cs-gpios: Specifies the GPIO pins to be used for chipselects.
+
+Example:
+	spi: spi@80000500 {
+		compatible = "cirrus,clps711x-spi";
+		reg = <0x80000500 0x4>;
+		interrupts = <15>;
+		clocks = <&clks 10>;
+		syscon = <&syscon3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cs-gpios = <&portb 4 GPIO_ACTIVE_LOW>,
+			   <&portb 5 GPIO_ACTIVE_LOW>;
+	};