@@ -49,22 +49,42 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
- /* clock starts at inactive polarity */
- for (word <<= (32 - bits); likely(bits); bits--) {
-
- /* setup MSB (to slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_TX) == 0)
- setmosi(spi, word & (1 << 31));
- spidelay(nsecs); /* T(setup) */
-
- setsck(spi, !cpol);
- spidelay(nsecs);
-
- /* sample MSB (from slave) on leading edge */
- if ((flags & SPI_MASTER_NO_RX) == 0)
- word |= getmiso(spi);
- setsck(spi, cpol);
- word <<= 1;
+ if (spi->mode & SPI_LSB_FIRST) {
+ /* clock starts at inactive polarity */
+ for (; likely(bits); bits--) {
+
+ /* setup MSB (to slave) on trailing edge */
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & 1);
+ spidelay(nsecs); /* T(setup) */
+
+ setsck(spi, !cpol);
+ spidelay(nsecs);
+
+ /* sample LSB (from slave) on leading edge */
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= getmiso(spi);
+ setsck(spi, cpol);
+ word >>= 1;
+ }
+ } else {
+ /* clock starts at inactive polarity */
+ for (word <<= (32 - bits); likely(bits); bits--) {
+
+ /* setup MSB (to slave) on trailing edge */
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
+ spidelay(nsecs); /* T(setup) */
+
+ setsck(spi, !cpol);
+ spidelay(nsecs);
+
+ /* sample MSB (from slave) on leading edge */
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= getmiso(spi);
+ setsck(spi, cpol);
+ word <<= 1;
+ }
}
return word;
}
@@ -76,22 +96,42 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
{
/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
- /* clock starts at inactive polarity */
- for (word <<= (32 - bits); likely(bits); bits--) {
+ if (spi->mode & SPI_LSB_FIRST) {
+ /* clock starts at inactive polarity */
+ for (; likely(bits); bits--) {
+
+ /* setup MSB (to slave) on leading edge */
+ setsck(spi, !cpol);
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & 1);
+ spidelay(nsecs); /* T(setup) */
+
+ setsck(spi, cpol);
+ spidelay(nsecs);
+
+ /* sample MSB (from slave) on trailing edge */
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= getmiso(spi);
+ word >>= 1;
+ }
+ } else {
+ /* clock starts at inactive polarity */
+ for (word <<= (32 - bits); likely(bits); bits--) {
- /* setup MSB (to slave) on leading edge */
- setsck(spi, !cpol);
- if ((flags & SPI_MASTER_NO_TX) == 0)
- setmosi(spi, word & (1 << 31));
- spidelay(nsecs); /* T(setup) */
+ /* setup MSB (to slave) on leading edge */
+ setsck(spi, !cpol);
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(spi, word & (1 << 31));
+ spidelay(nsecs); /* T(setup) */
- setsck(spi, cpol);
- spidelay(nsecs);
+ setsck(spi, cpol);
+ spidelay(nsecs);
- /* sample MSB (from slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_RX) == 0)
- word |= getmiso(spi);
- word <<= 1;
+ /* sample MSB (from slave) on trailing edge */
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= getmiso(spi);
+ word <<= 1;
+ }
}
return word;
}
@@ -432,7 +432,8 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
spin_lock_init(&bitbang->lock);
if (!master->mode_bits)
- master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST
+ | bitbang->flags;
if (master->transfer || master->transfer_one_message)
return -EINVAL;
The bitbang spi driver currently only supports the MSB mode. This patch adds the possibility to clock the data in LSB mode. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- drivers/spi/spi-bitbang-txrx.h | 98 +++++++++++++++++++++++++++++------------- drivers/spi/spi-bitbang.c | 3 +- 2 files changed, 71 insertions(+), 30 deletions(-)