Message ID | 1417534844-25080-5-git-send-email-lee.jones@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Maxime, Can you ping these up please? > The Synchronous Serial Controller is used to provide SPI. > > These are the ports which are located on the Stand-By Controller (SBC). > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > --- > arch/arm/boot/dts/stih407.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi > index 90bc090..80e2407 100644 > --- a/arch/arm/boot/dts/stih407.dtsi > +++ b/arch/arm/boot/dts/stih407.dtsi > @@ -329,5 +329,36 @@ > > status = "disabled"; > }; > + > + /* SBC SSC */ > + spi@9540000 { > + compatible = "st,comms-ssc4-spi"; > + reg = <0x9540000 0x110>; > + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_sysin>; > + clock-names = "ssc"; > + > + status = "disabled"; > + }; > + > + spi@9541000 { > + compatible = "st,comms-ssc4-spi"; > + reg = <0x9541000 0x110>; > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_sysin>; > + clock-names = "ssc"; > + > + status = "disabled"; > + }; > + > + spi@9542000 { > + compatible = "st,comms-ssc4-spi"; > + reg = <0x9542000 0x110>; > + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_sysin>; > + clock-names = "ssc"; > + > + status = "disabled"; > + }; > }; > };
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 90bc090..80e2407 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -329,5 +329,36 @@ status = "disabled"; }; + + /* SBC SSC */ + spi@9540000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9541000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9542000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9542000 0x110>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; }; };
The Synchronous Serial Controller is used to provide SPI. These are the ports which are located on the Stand-By Controller (SBC). Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih407.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)