| Message ID | 1418043214-14324-5-git-send-email-lee.jones@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Lee, On Mon, 08 Dec 2014, Lee Jones wrote: > The Synchronous Serial Controller is used to provide SPI. > > These are the ports which are located on the Stand-By Controller (SBC). After my series which adds stih410 SoC support, these nodes should now live in the common stih407-family.dtsi file (common to both SoC's). regards, Peter. -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 90bc090..80e2407 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -329,5 +329,36 @@ status = "disabled"; }; + + /* SBC SSC */ + spi@9540000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9541000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9542000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9542000 0x110>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; }; };
The Synchronous Serial Controller is used to provide SPI. These are the ports which are located on the Stand-By Controller (SBC). Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih407.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)