@@ -215,9 +215,14 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
return 0;
}
-static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable)
+static void orion_spi_set_cs(struct spi_device *spi, bool enable)
{
- if (enable)
+ struct orion_spi *orion_spi;
+
+ orion_spi = spi_master_get_devdata(spi->master);
+
+ /* Chip select logic is inverted from spi_set_cs */
+ if (!enable)
orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
else
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
@@ -332,64 +337,31 @@ out:
return xfer->len - count;
}
-static int orion_spi_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
+static int orion_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *t)
{
- struct orion_spi *orion_spi = spi_master_get_devdata(master);
- struct spi_device *spi = m->spi;
- struct spi_transfer *t = NULL;
- int par_override = 0;
int status = 0;
- int cs_active = 0;
-
- /* Load defaults */
- status = orion_spi_setup_transfer(spi, NULL);
+ status = orion_spi_setup_transfer(spi, t);
if (status < 0)
- goto msg_done;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (par_override || t->speed_hz || t->bits_per_word) {
- par_override = 1;
- status = orion_spi_setup_transfer(spi, t);
- if (status < 0)
- break;
- if (!t->speed_hz && !t->bits_per_word)
- par_override = 0;
- }
-
- if (!cs_active) {
- orion_spi_set_cs(orion_spi, 1);
- cs_active = 1;
- }
+ return status;
- if (t->len)
- m->actual_length += orion_spi_write_read(spi, t);
+ if (t->len)
+ orion_spi_write_read(spi, t);
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (t->cs_change) {
- orion_spi_set_cs(orion_spi, 0);
- cs_active = 0;
- }
- }
-
-msg_done:
- if (cs_active)
- orion_spi_set_cs(orion_spi, 0);
-
- m->status = status;
- spi_finalize_current_message(master);
+ return status;
+}
- return 0;
+static int orion_spi_setup(struct spi_device *spi)
+{
+ return orion_spi_setup_transfer(spi, NULL);
}
static int orion_spi_reset(struct orion_spi *orion_spi)
{
/* Verify that the CS is deasserted */
- orion_spi_set_cs(orion_spi, 0);
-
+ orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
return 0;
}
@@ -442,9 +414,10 @@ static int orion_spi_probe(struct platform_device *pdev)
/* we support only mode 0, and no options */
master->mode_bits = SPI_CPHA | SPI_CPOL;
-
- master->transfer_one_message = orion_spi_transfer_one_message;
+ master->set_cs = orion_spi_set_cs;
+ master->transfer_one = orion_spi_transfer_one;
master->num_chipselect = ORION_NUM_CHIPSELECTS;
+ master->setup = orion_spi_setup;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->auto_runtime_pm = true;
This commit changes spi-orion to provide setup, set_cs, and transfer_one functions instead of transfer_one_message. This allows chip select support for both native and GPIO chip selects to be added. Signed-off-by: Ken Wilson <ken.wilson@opengear.com> --- drivers/spi/spi-orion.c | 73 ++++++++++++++++--------------------------------- 1 file changed, 23 insertions(+), 50 deletions(-)