From patchwork Mon May 2 11:19:24 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stefan Roese X-Patchwork-Id: 8991271 Return-Path: X-Original-To: patchwork-linux-spi@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 6C5169F1D3 for ; Mon, 2 May 2016 11:19:46 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 153E320109 for ; Mon, 2 May 2016 11:19:45 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 97E5520165 for ; Mon, 2 May 2016 11:19:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753716AbcEBLTn (ORCPT ); Mon, 2 May 2016 07:19:43 -0400 Received: from mx1.mailbox.org ([80.241.60.212]:47935 "EHLO mx1.mailbox.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753519AbcEBLTm (ORCPT ); Mon, 2 May 2016 07:19:42 -0400 Received: from smtp1.mailbox.org (smtp1.mailbox.org [80.241.60.240]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.mailbox.org (Postfix) with ESMTPS id 36CD6423BF; Mon, 2 May 2016 13:19:40 +0200 (CEST) X-Virus-Scanned: amavisd-new at heinlein-support.de Received: from smtp1.mailbox.org ([80.241.60.240]) by hefe.heinlein-support.de (hefe.heinlein-support.de [91.198.250.172]) (amavisd-new, port 10030) with ESMTP id 0yI_u0R6AIob; Mon, 2 May 2016 13:19:25 +0200 (CEST) From: Stefan Roese To: linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni , Gregory CLEMENT , Andrew Lunn , Mark Brown Subject: [PATCH v7] spi: orion.c: Add direct access mode Date: Mon, 2 May 2016 13:19:24 +0200 Message-Id: <1462187964-21876-1-git-send-email-sr@denx.de> Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org X-Spam-Status: No, score=-7.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch adds support for the direct access mode to the Orion SPI driver which is used on the Marvell Armada based SoCs. In this direct mode, all data written to (or read from) a specifically mapped MBus window (linked to one SPI chip-select on one of the SPI controllers) will be transferred directly to the SPI bus. Without the need to control the SPI registers in between. This can improve the SPI transfer rate in such cases. Both, direct-read and -write mode are supported. But only the write mode has been tested. This mode especially benefits from the SPI direct mode, as the data bytes are written head-to-head to the SPI bus, without any additional addresses. One use-case for this direct write mode is, programming a FPGA bitstream image into the FPGA connected to the SPI bus at maximum speed. This mode is described in chapter "22.5.2 Direct Write to SPI" in the Marvell Armada XP Functional Spec Datasheet. Signed-off-by: Stefan Roese Cc: Thomas Petazzoni Cc: Gregory CLEMENT Cc: Andrew Lunn Acked-by: Arnd Bergmann Cc: Mark Brown --- v7: - Changed tx function to only write the really intended number of bytes (drop DIV_ROUND_UP) as suggested by Arnd. - Added Arnd's Acked-by v6: - Switched from memcpy() to writesl() for the TX transfer. - Only one page is mapped via ioremap as this is sufficient for the currently implemented simple TX transfer. - Removed max_transfer_size() as its not needed with the current one page mapping that supports an unlimited amount of SPI data. - Added a comment to the 'reg' description in the DT bindings documentation as suggested by Arnd. - Changed 'reg' and 'ranges' to use '<' and '>' in this file. - Changed size to 0xffffffff in this file. - Added a small paragraph to the commit text, describing the possibility to support SPI-NOR & SPI-NAND devices via this direct access mode. v5: - Added some documentation for the direct mode to the orion-spi DT bindings document, including an example and a reference to the mbus DT bindings documentation. v4: - Add max_transfer_size() - Fall back from direct-write mode to PIO mode when - transfer size is exceedeed - non-8bit transfers - Restrict to direct-write mode for now. SPI direct read mode can be added later, when someone has a platform supporting this mode. v3: - Used static MBus windows again, as suggested by Arnd - No new DT bindings needed for this. The MBus windows need to be configured in the 'reg' property of the SPI controller. This is done in a separate patch for the Armada platforms. - The direct mapping is configured and enable by adding the specific MBus entry to the 'ranges' property of the 'soc' node in the board dts file. v2: - Use one MBus window for each SPI controller instead of one for for each SPI device. This MBus window is re-assigned, once the CS changes. - Assert the CS over the entire message - Don't restrict the direct access mode to only direct write mode - Add check for max size before using memcpy() - Remove spidev from DT bindings documentation .../devicetree/bindings/spi/spi-orion.txt | 49 +++++++++++- drivers/spi/spi-orion.c | 87 ++++++++++++++++++++++ 2 files changed, 135 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index 98bc698..4f629cc 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -8,7 +8,15 @@ Required properties: - "marvell,armada-380-spi", for the Armada 38x SoCs - "marvell,armada-390-spi", for the Armada 39x SoCs - "marvell,armada-xp-spi", for the Armada XP SoCs -- reg : offset and length of the register set for the device +- reg : offset and length of the register set for the device. + This property can optionally have additional entries to configure + the SPI direct access mode that some of the Marvell SoCs support + additionally to the normal indirect access (PIO) mode. The values + for the MBus "target" and "attribute" are defined in the Marvell + SoC "Functional Specifications" Manual in the chapter "Marvell + Core Processor Address Decoding". + The eight register sets following the control registers refer to + chip-select lines 0 through 7 respectively. - cell-index : Which of multiple SPI controllers is this. Optional properties: - interrupts : Is currently not used. @@ -23,3 +31,42 @@ Example: interrupts = <23>; status = "disabled"; }; + +Example with SPI direct mode support (optionally): + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = , /* control */ + , /* CS0 */ + , /* CS1 */ + , /* CS2 */ + , /* CS3 */ + , /* CS4 */ + , /* CS5 */ + , /* CS6 */ + ; /* CS7 */ + interrupts = <23>; + status = "disabled"; + }; + +To enable the direct mode, the board specific 'ranges' property in the +'soc' node needs to add the entries for the desired SPI controllers +and its chip-selects that are used in the direct mode instead of PIO +mode. Here an example for this (SPI controller 0, device 1 and SPI +controller 1, device 2 are used in direct mode. All other SPI device +are used in the default indirect (PIO) mode): + soc { + /* + * Enable the SPI direct access by configuring an entry + * here in the board-specific ranges property + */ + ranges = , /* internal regs */ + , /* BootROM */ + , /* SPI0-DEV1 */ + ; /* SPI1-DEV2 */ + +For further information on the MBus bindings, please see the MBus +DT documentation: +Documentation/devicetree/bindings/bus/mvebu-mbus.txt diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index a87cfd4..71ea533 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -43,6 +44,9 @@ #define ORION_SPI_INT_CAUSE_REG 0x10 #define ORION_SPI_TIMING_PARAMS_REG 0x18 +/* Register for the "Direct Mode" */ +#define SPI_DIRECT_WRITE_CONFIG_REG 0x20 + #define ORION_SPI_TMISO_SAMPLE_MASK (0x3 << 6) #define ORION_SPI_TMISO_SAMPLE_1 (1 << 6) #define ORION_SPI_TMISO_SAMPLE_2 (2 << 6) @@ -78,11 +82,18 @@ struct orion_spi_dev { bool is_errata_50mhz_ac; }; +struct orion_direct_acc { + void __iomem *vaddr; + u32 size; +}; + struct orion_spi { struct spi_master *master; void __iomem *base; struct clk *clk; const struct orion_spi_dev *devdata; + + struct orion_direct_acc direct_access[ORION_NUM_CHIPSELECTS]; }; static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) @@ -372,10 +383,38 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) { unsigned int count; int word_len; + struct orion_spi *orion_spi; + int cs = spi->chip_select; word_len = spi->bits_per_word; count = xfer->len; + orion_spi = spi_master_get_devdata(spi->master); + + /* + * Use SPI direct write mode if base address is available. Otherwise + * fall back to PIO mode for this transfer. + */ + if ((orion_spi->direct_access[cs].vaddr) && (xfer->tx_buf) && + (word_len == 8)) { + unsigned int cnt = count >> 2; + unsigned int rem = count % 4; + + /* + * Send the TX-data to the SPI device via the direct + * mapped address window + */ + writesl(orion_spi->direct_access[cs].vaddr, xfer->tx_buf, cnt); + if (rem) { + u32 *buf = (u32 *)xfer->tx_buf; + + writesb(orion_spi->direct_access[cs].vaddr, &buf[cnt], + rem); + } + + return count; + } + if (word_len == 8) { const u8 *tx = xfer->tx_buf; u8 *rx = xfer->rx_buf; @@ -425,6 +464,10 @@ static int orion_spi_reset(struct orion_spi *orion_spi) { /* Verify that the CS is deasserted */ orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); + + /* Don't deassert CS between the direct mapped SPI transfers */ + writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG)); + return 0; } @@ -504,6 +547,7 @@ static int orion_spi_probe(struct platform_device *pdev) struct resource *r; unsigned long tclk_hz; int status = 0; + struct device_node *np; master = spi_alloc_master(&pdev->dev, sizeof(*spi)); if (master == NULL) { @@ -576,6 +620,49 @@ static int orion_spi_probe(struct platform_device *pdev) goto out_rel_clk; } + /* Scan all SPI devices of this controller for direct mapped devices */ + for_each_available_child_of_node(pdev->dev.of_node, np) { + u32 cs; + + /* Get chip-select number from the "reg" property */ + status = of_property_read_u32(np, "reg", &cs); + if (status) { + dev_err(&pdev->dev, + "%s has no valid 'reg' property (%d)\n", + np->full_name, status); + status = 0; + continue; + } + + /* + * Check if an address is configured for this SPI device. If + * not, the MBus mapping via the 'ranges' property in the 'soc' + * node is not configured and this device should not use the + * direct mode. In this case, just continue with the next + * device. + */ + status = of_address_to_resource(pdev->dev.of_node, cs + 1, r); + if (status) + continue; + + /* + * Only map one page for direct access. This is enough for the + * simple TX transfer which only writes to the first word. + * This needs to get extended for the direct SPI-NOR / SPI-NAND + * support, once this gets implemented. + */ + spi->direct_access[cs].vaddr = devm_ioremap(&pdev->dev, + r->start, + PAGE_SIZE); + if (IS_ERR(spi->direct_access[cs].vaddr)) { + status = PTR_ERR(spi->direct_access[cs].vaddr); + goto out_rel_clk; + } + spi->direct_access[cs].size = PAGE_SIZE; + + dev_info(&pdev->dev, "CS%d configured for direct access\n", cs); + } + pm_runtime_set_active(&pdev->dev); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);