diff mbox

[v6,6/8] efi: load SSTDs from EFI variables

Message ID 1467713392-24825-1-git-send-email-octavian.purdila@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Octavian Purdila July 5, 2016, 10:09 a.m. UTC
This patch allows SSDTs to be loaded from EFI variables. It works by
specifying the EFI variable name containing the SSDT to be loaded. All
variables with the same name (regardless of the vendor GUID) will be
loaded.

Note that we can't use acpi_install_table and we must rely on the
dynamic ACPI table loading and bus re-scanning mechanisms. That is
because I2C/SPI controllers are initialized earlier then the EFI
subsystems and all I2C/SPI ACPI devices are enumerated when the
I2C/SPI controllers are initialized.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
---

As the rest of the series remains unchanged and it got Acks from most
of the other patches, I've resend only this patch. Rafael, please let
me know if you prefer to resend the whole series.

Changes from v5:

* enable duplicate detection to avoid firmware bugs that returns the
same variable over and over again; this requires pushing the entry
allocation back into efivar_ssdt_iter() and creating a temporary list
that is iterated over in efivar_ssdt_load()

* marked efivar_ssdt with __initdata


 Documentation/acpi/ssdt-overlays.txt | 67 +++++++++++++++++++++++++
 Documentation/kernel-parameters.txt  |  7 +++
 drivers/firmware/efi/efi.c           | 96 ++++++++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)

Comments

Matt Fleming July 6, 2016, 11:58 a.m. UTC | #1
On Tue, 05 Jul, at 01:09:52PM, Octavian Purdila wrote:
> This patch allows SSDTs to be loaded from EFI variables. It works by
> specifying the EFI variable name containing the SSDT to be loaded. All
> variables with the same name (regardless of the vendor GUID) will be
> loaded.
> 
> Note that we can't use acpi_install_table and we must rely on the
> dynamic ACPI table loading and bus re-scanning mechanisms. That is
> because I2C/SPI controllers are initialized earlier then the EFI
> subsystems and all I2C/SPI ACPI devices are enumerated when the
> I2C/SPI controllers are initialized.
> 
> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
> ---
> 
> As the rest of the series remains unchanged and it got Acks from most
> of the other patches, I've resend only this patch. Rafael, please let
> me know if you prefer to resend the whole series.
> 
> Changes from v5:
> 
> * enable duplicate detection to avoid firmware bugs that returns the
> same variable over and over again; this requires pushing the entry
> allocation back into efivar_ssdt_iter() and creating a temporary list
> that is iterated over in efivar_ssdt_load()
> 
> * marked efivar_ssdt with __initdata
> 
> 
>  Documentation/acpi/ssdt-overlays.txt | 67 +++++++++++++++++++++++++
>  Documentation/kernel-parameters.txt  |  7 +++
>  drivers/firmware/efi/efi.c           | 96 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 170 insertions(+)

Looks fine to me. Thanks Octavian.

Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt
index 8050259..c4b57ba 100644
--- a/Documentation/acpi/ssdt-overlays.txt
+++ b/Documentation/acpi/ssdt-overlays.txt
@@ -89,3 +89,70 @@  cp ssdt.aml kernel/firmware/acpi
 # on top:
 find kernel | cpio -H newc --create > /boot/instrumented_initrd
 cat /boot/initrd >>/boot/instrumented_initrd
+
+== Loading ACPI SSDTs from EFI variables ==
+
+This is the preferred method, when EFI is supported on the platform, because it
+allows a persistent, OS independent way of storing the user defined SSDTs. There
+is also work underway to implement EFI support for loading user defined SSDTs
+and using this method will make it easier to convert to the EFI loading
+mechanism when that will arrive.
+
+In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line
+parameter can be used. The argument for the option is the variable name to
+use. If there are multiple variables with the same name but with different
+vendor GUIDs, all of them will be loaded.
+
+In order to store the AML code in an EFI variable the efivarfs filesystem can be
+used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all
+recent distribution.
+
+Creating a new file in /sys/firmware/efi/efivars will automatically create a new
+EFI variable. Updating a file in /sys/firmware/efi/efivars will update the EFI
+variable. Please note that the file name needs to be specially formatted as
+"Name-GUID" and that the first 4 bytes in the file (little-endian format)
+represent the attributes of the EFI variable (see EFI_VARIABLE_MASK in
+include/linux/efi.h). Writing to the file must also be done with one write
+operation.
+
+For example, you can use the following bash script to create/update an EFI
+variable with the content from a given file:
+
+#!/bin/sh -e
+
+while ! [ -z "$1" ]; do
+        case "$1" in
+        "-f") filename="$2"; shift;;
+        "-g") guid="$2"; shift;;
+        *) name="$1";;
+        esac
+        shift
+done
+
+usage()
+{
+        echo "Syntax: ${0##*/} -f filename [ -g guid ] name"
+        exit 1
+}
+
+[ -n "$name" -a -f "$filename" ] || usage
+
+EFIVARFS="/sys/firmware/efi/efivars"
+
+[ -d "$EFIVARFS" ] || exit 2
+
+if stat -tf $EFIVARFS | grep -q -v de5e81e4; then
+        mount -t efivarfs none $EFIVARFS
+fi
+
+# try to pick up an existing GUID
+[ -n "$guid" ] || guid=$(find "$EFIVARFS" -name "$name-*" | head -n1 | cut -f2- -d-)
+
+# use a randomly generated GUID
+[ -n "$guid" ] || guid="$(cat /proc/sys/kernel/random/uuid)"
+
+# efivarfs expects all of the data in one write
+tmp=$(mktemp)
+/bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp
+dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp)
+rm $tmp
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 82b42c9..bbfb56f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1185,6 +1185,13 @@  bytes respectively. Such letter suffixes can also be entirely omitted.
 			Address Range Mirroring feature even if your box
 			doesn't support it.
 
+	efivar_ssdt=	[EFI; X86] Name of an EFI variable that contains an SSDT
+			that is to be dynamically loaded by Linux. If there are
+			multiple variables with the same name but with different
+			vendor GUIDs, all of them will be loaded. See
+			Documentation/acpi/ssdt-overlays.txt for details.
+
+
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 05509f3..8730fd4 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -24,6 +24,9 @@ 
 #include <linux/of_fdt.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/ucs2_string.h>
 
 #include <asm/early_ioremap.h>
 
@@ -195,6 +198,96 @@  static void generic_ops_unregister(void)
 	efivars_unregister(&generic_efivars);
 }
 
+#if IS_ENABLED(CONFIG_ACPI)
+#define EFIVAR_SSDT_NAME_MAX	16
+static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata;
+static int __init efivar_ssdt_setup(char *str)
+{
+	if (strlen(str) < sizeof(efivar_ssdt))
+		memcpy(efivar_ssdt, str, strlen(str));
+	else
+		pr_warn("efivar_ssdt: name too long: %s\n", str);
+	return 0;
+}
+__setup("efivar_ssdt=", efivar_ssdt_setup);
+
+static __init int efivar_ssdt_iter(efi_char16_t *name, efi_guid_t vendor,
+				   unsigned long name_size, void *data)
+{
+	struct efivar_entry *entry;
+	struct list_head *list = data;
+	char utf8_name[EFIVAR_SSDT_NAME_MAX];
+	int limit = min_t(unsigned long, EFIVAR_SSDT_NAME_MAX, name_size);
+
+	ucs2_as_utf8(utf8_name, name, limit - 1);
+	if (strncmp(utf8_name, efivar_ssdt, limit) != 0)
+		return 0;
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return 0;
+
+	memcpy(entry->var.VariableName, name, name_size);
+	memcpy(&entry->var.VendorGuid, &vendor, sizeof(efi_guid_t));
+
+	efivar_entry_add(entry, list);
+
+	return 0;
+}
+
+static __init int efivar_ssdt_load(void)
+{
+	LIST_HEAD(entries);
+	struct efivar_entry *entry, *aux;
+	unsigned long size;
+	void *data;
+	int ret;
+
+	ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
+
+	list_for_each_entry_safe(entry, aux, &entries, list) {
+		pr_info("loading SSDT from variable %s-%pUl\n", efivar_ssdt,
+			&entry->var.VendorGuid);
+
+		list_del(&entry->list);
+
+		ret = efivar_entry_size(entry, &size);
+		if (ret) {
+			pr_err("failed to get var size\n");
+			goto free_entry;
+		}
+
+		data = kmalloc(size, GFP_KERNEL);
+		if (!data)
+			goto free_entry;
+
+		ret = efivar_entry_get(entry, NULL, &size, data);
+		if (ret) {
+			pr_err("failed to get var data\n");
+			goto free_data;
+		}
+
+		ret = acpi_load_table(data);
+		if (ret) {
+			pr_err("failed to load table: %d\n", ret);
+			goto free_data;
+		}
+
+		goto free_entry;
+
+free_data:
+		kfree(data);
+
+free_entry:
+		kfree(entry);
+	}
+
+	return ret;
+}
+#else
+static inline int efivar_ssdt_load(void) { return 0; }
+#endif
+
 /*
  * We register the efi subsystem with the firmware subsystem and the
  * efivars subsystem with the efi subsystem, if the system was booted with
@@ -218,6 +311,9 @@  static int __init efisubsys_init(void)
 	if (error)
 		goto err_put;
 
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		efivar_ssdt_load();
+
 	error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
 	if (error) {
 		pr_err("efi: Sysfs attribute export failed with error %d.\n",