@@ -9,163 +9,11 @@
//
#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
+#include <linux/mfd/mxic-mx25f0a.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
-#define HC_CFG 0x0
-#define HC_CFG_IF_CFG(x) ((x) << 27)
-#define HC_CFG_DUAL_SLAVE BIT(31)
-#define HC_CFG_INDIVIDUAL BIT(30)
-#define HC_CFG_NIO(x) (((x) / 4) << 27)
-#define HC_CFG_TYPE(s, t) ((t) << (23 + ((s) * 2)))
-#define HC_CFG_TYPE_SPI_NOR 0
-#define HC_CFG_TYPE_SPI_NAND 1
-#define HC_CFG_TYPE_SPI_RAM 2
-#define HC_CFG_TYPE_RAW_NAND 3
-#define HC_CFG_SLV_ACT(x) ((x) << 21)
-#define HC_CFG_CLK_PH_EN BIT(20)
-#define HC_CFG_CLK_POL_INV BIT(19)
-#define HC_CFG_BIG_ENDIAN BIT(18)
-#define HC_CFG_DATA_PASS BIT(17)
-#define HC_CFG_IDLE_SIO_LVL(x) ((x) << 16)
-#define HC_CFG_MAN_START_EN BIT(3)
-#define HC_CFG_MAN_START BIT(2)
-#define HC_CFG_MAN_CS_EN BIT(1)
-#define HC_CFG_MAN_CS_ASSERT BIT(0)
-
-#define INT_STS 0x4
-#define INT_STS_EN 0x8
-#define INT_SIG_EN 0xc
-#define INT_STS_ALL GENMASK(31, 0)
-#define INT_RDY_PIN BIT(26)
-#define INT_RDY_SR BIT(25)
-#define INT_LNR_SUSP BIT(24)
-#define INT_ECC_ERR BIT(17)
-#define INT_CRC_ERR BIT(16)
-#define INT_LWR_DIS BIT(12)
-#define INT_LRD_DIS BIT(11)
-#define INT_SDMA_INT BIT(10)
-#define INT_DMA_FINISH BIT(9)
-#define INT_RX_NOT_FULL BIT(3)
-#define INT_RX_NOT_EMPTY BIT(2)
-#define INT_TX_NOT_FULL BIT(1)
-#define INT_TX_EMPTY BIT(0)
-
-#define HC_EN 0x10
-#define HC_EN_BIT BIT(0)
-
-#define TXD(x) (0x14 + ((x) * 4))
-#define RXD 0x24
-
-#define SS_CTRL(s) (0x30 + ((s) * 4))
-#define LRD_CFG 0x44
-#define LWR_CFG 0x80
-#define RWW_CFG 0x70
-#define OP_READ BIT(23)
-#define OP_DUMMY_CYC(x) ((x) << 17)
-#define OP_ADDR_BYTES(x) ((x) << 14)
-#define OP_CMD_BYTES(x) (((x) - 1) << 13)
-#define OP_OCTA_CRC_EN BIT(12)
-#define OP_DQS_EN BIT(11)
-#define OP_ENHC_EN BIT(10)
-#define OP_PREAMBLE_EN BIT(9)
-#define OP_DATA_DDR BIT(8)
-#define OP_DATA_BUSW(x) ((x) << 6)
-#define OP_ADDR_DDR BIT(5)
-#define OP_ADDR_BUSW(x) ((x) << 3)
-#define OP_CMD_DDR BIT(2)
-#define OP_CMD_BUSW(x) (x)
-#define OP_BUSW_1 0
-#define OP_BUSW_2 1
-#define OP_BUSW_4 2
-#define OP_BUSW_8 3
-
-#define OCTA_CRC 0x38
-#define OCTA_CRC_IN_EN(s) BIT(3 + ((s) * 16))
-#define OCTA_CRC_CHUNK(s, x) ((fls((x) / 32)) << (1 + ((s) * 16)))
-#define OCTA_CRC_OUT_EN(s) BIT(0 + ((s) * 16))
-
-#define ONFI_DIN_CNT(s) (0x3c + (s))
-
-#define LRD_CTRL 0x48
-#define RWW_CTRL 0x74
-#define LWR_CTRL 0x84
-#define LMODE_EN BIT(31)
-#define LMODE_SLV_ACT(x) ((x) << 21)
-#define LMODE_CMD1(x) ((x) << 8)
-#define LMODE_CMD0(x) (x)
-
-#define LRD_ADDR 0x4c
-#define LWR_ADDR 0x88
-#define LRD_RANGE 0x50
-#define LWR_RANGE 0x8c
-
-#define AXI_SLV_ADDR 0x54
-
-#define DMAC_RD_CFG 0x58
-#define DMAC_WR_CFG 0x94
-#define DMAC_CFG_PERIPH_EN BIT(31)
-#define DMAC_CFG_ALLFLUSH_EN BIT(30)
-#define DMAC_CFG_LASTFLUSH_EN BIT(29)
-#define DMAC_CFG_QE(x) (((x) + 1) << 16)
-#define DMAC_CFG_BURST_LEN(x) (((x) + 1) << 12)
-#define DMAC_CFG_BURST_SZ(x) ((x) << 8)
-#define DMAC_CFG_DIR_READ BIT(1)
-#define DMAC_CFG_START BIT(0)
-
-#define DMAC_RD_CNT 0x5c
-#define DMAC_WR_CNT 0x98
-
-#define SDMA_ADDR 0x60
-
-#define DMAM_CFG 0x64
-#define DMAM_CFG_START BIT(31)
-#define DMAM_CFG_CONT BIT(30)
-#define DMAM_CFG_SDMA_GAP(x) (fls((x) / 8192) << 2)
-#define DMAM_CFG_DIR_READ BIT(1)
-#define DMAM_CFG_EN BIT(0)
-
-#define DMAM_CNT 0x68
-
-#define LNR_TIMER_TH 0x6c
-
-#define RDM_CFG0 0x78
-#define RDM_CFG0_POLY(x) (x)
-
-#define RDM_CFG1 0x7c
-#define RDM_CFG1_RDM_EN BIT(31)
-#define RDM_CFG1_SEED(x) (x)
-
-#define LWR_SUSP_CTRL 0x90
-#define LWR_SUSP_CTRL_EN BIT(31)
-
-#define DMAS_CTRL 0x9c
-#define DMAS_CTRL_DIR_READ BIT(31)
-#define DMAS_CTRL_EN BIT(30)
-
-#define DATA_STROB 0xa0
-#define DATA_STROB_EDO_EN BIT(2)
-#define DATA_STROB_INV_POL BIT(1)
-#define DATA_STROB_DELAY_2CYC BIT(0)
-
-#define IDLY_CODE(x) (0xa4 + ((x) * 4))
-#define IDLY_CODE_VAL(x, v) ((v) << (((x) % 4) * 8))
-
-#define GPIO 0xc4
-#define GPIO_PT(x) BIT(3 + ((x) * 16))
-#define GPIO_RESET(x) BIT(2 + ((x) * 16))
-#define GPIO_HOLDB(x) BIT(1 + ((x) * 16))
-#define GPIO_WPB(x) BIT((x) * 16)
-
-#define HC_VER 0xd0
-
-#define HW_TEST(x) (0xe0 + ((x) * 4))
-
struct mxic_spi {
struct clk *ps_clk;
struct clk *send_clk;
@@ -525,8 +373,8 @@ static int __maybe_unused mxic_spi_runtime_resume(struct device *dev)
static int mxic_spi_probe(struct platform_device *pdev)
{
+ struct mx25f0a_mfd *mxic_mfd = dev_get_drvdata(pdev->dev.parent);
struct spi_master *master;
- struct resource *res;
struct mxic_spi *mxic;
int ret;
@@ -552,8 +400,7 @@ static int mxic_spi_probe(struct platform_device *pdev)
if (IS_ERR(mxic->send_dly_clk))
return PTR_ERR(mxic->send_dly_clk);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
- mxic->regs = devm_ioremap_resource(&pdev->dev, res);
+ mxic->regs = mxic_mfd->base;
if (IS_ERR(mxic->regs))
return PTR_ERR(mxic->regs);
Patch a MFD driver for Macronix MX25F0A SPI controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> --- drivers/spi/spi-mxic.c | 159 +------------------------------------------------ 1 file changed, 3 insertions(+), 156 deletions(-)