@@ -419,6 +419,13 @@ struct sdma_driver_data {
int num_events;
struct sdma_script_start_addrs *script_addrs;
bool check_ratio;
+ /*
+ * ecspi ERR009165 fixed should be done in sdma script
+ * and it be fixed in soc from i.mx6ul.
+ * please get more information from below link:
+ * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+ */
+ bool ecspi_fixed;
};
struct sdma_engine {
@@ -539,6 +546,31 @@ static struct sdma_driver_data sdma_imx6q = {
.script_addrs = &sdma_script_imx6q,
};
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1032,
+ .mcu_2_shp_addr = 960,
+ .app_2_mcu_addr = 683,
+ .shp_2_mcu_addr = 891,
+ .spdif_2_mcu_addr = 1100,
+ .mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+ .chnenbl0 = SDMA_CHNENBL0_IMX35,
+ .num_events = 48,
+ .script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+ .chnenbl0 = SDMA_CHNENBL0_IMX35,
+ .num_events = 48,
+ .script_addrs = &sdma_script_imx6sx,
+ .ecspi_fixed = true,
+};
+
static struct sdma_script_start_addrs sdma_script_imx7d = {
.ap_2_ap_addr = 644,
.uart_2_mcu_addr = 819,
@@ -562,6 +594,7 @@ static struct sdma_driver_data sdma_imx8mq = {
.num_events = 48,
.script_addrs = &sdma_script_imx7d,
.check_ratio = 1,
+ .ecspi_fixed = true,
};
static const struct platform_device_id sdma_devtypes[] = {
@@ -584,9 +617,15 @@ static const struct platform_device_id sdma_devtypes[] = {
.name = "imx6q-sdma",
.driver_data = (unsigned long)&sdma_imx6q,
}, {
+ .name = "imx6sx-sdma",
+ .driver_data = (unsigned long)&sdma_imx6sx,
+ }, {
.name = "imx7d-sdma",
.driver_data = (unsigned long)&sdma_imx7d,
}, {
+ .name = "imx6ul-sdma",
+ .driver_data = (unsigned long)&sdma_imx6ul,
+ }, {
.name = "imx8mq-sdma",
.driver_data = (unsigned long)&sdma_imx8mq,
}, {
@@ -602,7 +641,9 @@ static const struct of_device_id sdma_dt_ids[] = {
{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+ { .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+ { .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
{ /* sentinel */ }
};
@@ -1166,8 +1207,17 @@ static int sdma_config_channel(struct dma_chan *chan)
if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
sdmac->peripheral_type == IMX_DMATYPE_ASRC)
sdma_set_watermarklevel_for_p2p(sdmac);
- } else
+ } else {
+ /*
+ * ERR009165 fixed from i.mx6ul, no errata need,
+ * set bit31 to let sdma script skip the errata.
+ */
+ if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+ sdmac->direction == DMA_MEM_TO_DEV &&
+ sdmac->sdma->drvdata->ecspi_fixed)
+ __set_bit(31, &sdmac->watermark_level);
__set_bit(sdmac->event_id0, sdmac->event_mask);
+ }
/* Address */
sdmac->shp_addr = sdmac->per_address;
ECSPI issue fixed from i.mx6ul at hardware level, no need ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx from where i.mx6ul source. Signed-off-by: Robin Gong <yibin.gong@nxp.com> --- drivers/dma/imx-sdma.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)