diff mbox series

[3/3] spi: uniphier: introduce polling mode

Message ID 1567488661-11428-4-git-send-email-hayashibara.keiji@socionext.com (mailing list archive)
State Accepted
Commit 37ffab81709805c674f164948e03ba0d3fe371b6
Headers show
Series spi: uniphier: introduce polling mode and fix bug | expand

Commit Message

Keiji Hayashibara Sept. 3, 2019, 5:31 a.m. UTC
Introduce new polling mode for short size transfer. Either the estimated
transfer time is estimated to exceed 200us, or polling loop actually exceeds
200us, it switches to irq mode.

Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
---
 drivers/spi/spi-uniphier.c | 81 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 66 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
index d40ad93..6b83b25 100644
--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -7,6 +7,7 @@ 
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -16,6 +17,7 @@ 
 #include <asm/unaligned.h>
 
 #define SSI_TIMEOUT_MS		2000
+#define SSI_POLL_TIMEOUT_US	200
 #define SSI_MAX_CLK_DIVIDER	254
 #define SSI_MIN_CLK_DIVIDER	4
 
@@ -290,21 +292,23 @@  static void uniphier_spi_recv(struct uniphier_spi_priv *priv)
 
 static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv)
 {
-	unsigned int tx_count;
+	unsigned int fifo_threshold, fill_bytes;
 	u32 val;
 
-	tx_count = DIV_ROUND_UP(priv->tx_bytes,
+	fifo_threshold = DIV_ROUND_UP(priv->rx_bytes,
 				bytes_per_word(priv->bits_per_word));
-	tx_count = min(tx_count, SSI_FIFO_DEPTH);
+	fifo_threshold = min(fifo_threshold, SSI_FIFO_DEPTH);
+
+	fill_bytes = fifo_threshold - (priv->rx_bytes - priv->tx_bytes);
 
 	/* set fifo threshold */
 	val = readl(priv->base + SSI_FC);
 	val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK);
-	val |= FIELD_PREP(SSI_FC_TXFTH_MASK, tx_count);
-	val |= FIELD_PREP(SSI_FC_RXFTH_MASK, tx_count);
+	val |= FIELD_PREP(SSI_FC_TXFTH_MASK, fifo_threshold);
+	val |= FIELD_PREP(SSI_FC_RXFTH_MASK, fifo_threshold);
 	writel(val, priv->base + SSI_FC);
 
-	while (tx_count--)
+	while (fill_bytes--)
 		uniphier_spi_send(priv);
 }
 
@@ -323,20 +327,14 @@  static void uniphier_spi_set_cs(struct spi_device *spi, bool enable)
 	writel(val, priv->base + SSI_FPS);
 }
 
-static int uniphier_spi_transfer_one(struct spi_master *master,
-				     struct spi_device *spi,
-				     struct spi_transfer *t)
+static int uniphier_spi_transfer_one_irq(struct spi_master *master,
+					 struct spi_device *spi,
+					 struct spi_transfer *t)
 {
 	struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
 	struct device *dev = master->dev.parent;
 	unsigned long time_left;
 
-	/* Terminate and return success for 0 byte length transfer */
-	if (!t->len)
-		return 0;
-
-	uniphier_spi_setup_transfer(spi, t);
-
 	reinit_completion(&priv->xfer_done);
 
 	uniphier_spi_fill_tx_fifo(priv);
@@ -356,6 +354,59 @@  static int uniphier_spi_transfer_one(struct spi_master *master,
 	return priv->error;
 }
 
+static int uniphier_spi_transfer_one_poll(struct spi_master *master,
+					  struct spi_device *spi,
+					  struct spi_transfer *t)
+{
+	struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+	int loop = SSI_POLL_TIMEOUT_US * 10;
+
+	while (priv->tx_bytes) {
+		uniphier_spi_fill_tx_fifo(priv);
+
+		while ((priv->rx_bytes - priv->tx_bytes) > 0) {
+			while (!(readl(priv->base + SSI_SR) & SSI_SR_RNE)
+								&& loop--)
+				ndelay(100);
+
+			if (loop == -1)
+				goto irq_transfer;
+
+			uniphier_spi_recv(priv);
+		}
+	}
+
+	return 0;
+
+irq_transfer:
+	return uniphier_spi_transfer_one_irq(master, spi, t);
+}
+
+static int uniphier_spi_transfer_one(struct spi_master *master,
+				     struct spi_device *spi,
+				     struct spi_transfer *t)
+{
+	struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
+	unsigned long threshold;
+
+	/* Terminate and return success for 0 byte length transfer */
+	if (!t->len)
+		return 0;
+
+	uniphier_spi_setup_transfer(spi, t);
+
+	/*
+	 * If the transfer operation will take longer than
+	 * SSI_POLL_TIMEOUT_US, it should use irq.
+	 */
+	threshold = DIV_ROUND_UP(SSI_POLL_TIMEOUT_US * priv->speed_hz,
+					USEC_PER_SEC * BITS_PER_BYTE);
+	if (t->len > threshold)
+		return uniphier_spi_transfer_one_irq(master, spi, t);
+	else
+		return uniphier_spi_transfer_one_poll(master, spi, t);
+}
+
 static int uniphier_spi_prepare_transfer_hardware(struct spi_master *master)
 {
 	struct uniphier_spi_priv *priv = spi_master_get_devdata(master);