diff mbox series

[v2,05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi

Message ID 1578673089-3484-6-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State Superseded
Headers show
Series add device tree for SAM9X60 SoC and SAM9X60-EK board | expand

Commit Message

Claudiu Beznea Jan. 10, 2020, 4:17 p.m. UTC
Add microchip,sam9x60-isi to DT bindings documentation.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/media/atmel-isi.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Rob Herring (Arm) Jan. 13, 2020, 11:25 p.m. UTC | #1
On Fri, 10 Jan 2020 18:17:57 +0200, Claudiu Beznea wrote:
> Add microchip,sam9x60-isi to DT bindings documentation.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/media/atmel-isi.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Alexandre Belloni Jan. 14, 2020, 9:51 a.m. UTC | #2
On 10/01/2020 18:17:57+0200, Claudiu Beznea wrote:
> Add microchip,sam9x60-isi to DT bindings documentation.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/media/atmel-isi.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
Hans Verkuil Jan. 14, 2020, 12:21 p.m. UTC | #3
On 1/10/20 5:17 PM, Claudiu Beznea wrote:
> Add microchip,sam9x60-isi to DT bindings documentation.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/media/atmel-isi.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
> index 332513a151cc..8924c7545b63 100644
> --- a/Documentation/devicetree/bindings/media/atmel-isi.txt
> +++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
> @@ -2,7 +2,7 @@ Atmel Image Sensor Interface (ISI)
>  ----------------------------------
>  
>  Required properties for ISI:
> -- compatible: must be "atmel,at91sam9g45-isi".
> +- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
>  - reg: physical base address and length of the registers set for the device.
>  - interrupts: should contain IRQ line for the ISI.
>  - clocks: list of clock specifiers, corresponding to entries in the clock-names
> 

Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Regards,

	Hans
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
index 332513a151cc..8924c7545b63 100644
--- a/Documentation/devicetree/bindings/media/atmel-isi.txt
+++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
@@ -2,7 +2,7 @@  Atmel Image Sensor Interface (ISI)
 ----------------------------------
 
 Required properties for ISI:
-- compatible: must be "atmel,at91sam9g45-isi".
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
 - reg: physical base address and length of the registers set for the device.
 - interrupts: should contain IRQ line for the ISI.
 - clocks: list of clock specifiers, corresponding to entries in the clock-names