From patchwork Fri Oct 22 15:56:29 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alan Cox X-Patchwork-Id: 274591 Received: from lists.sourceforge.net (lists.sourceforge.net [216.34.181.88]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o9MGoRHw011270 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 22 Oct 2010 16:50:49 GMT Received: from localhost ([127.0.0.1] helo=sfs-ml-2.v29.ch3.sourceforge.com) by sfs-ml-2.v29.ch3.sourceforge.com with esmtp (Exim 4.69) (envelope-from ) id 1P9Kp1-0005uQ-1H; Fri, 22 Oct 2010 16:50:27 +0000 Received: from sog-mx-2.v43.ch3.sourceforge.com ([172.29.43.192] helo=mx.sourceforge.net) by sfs-ml-2.v29.ch3.sourceforge.com with esmtp (Exim 4.69) (envelope-from ) id 1P9Koz-0005uJ-EG for spi-devel-general@lists.sourceforge.net; Fri, 22 Oct 2010 16:50:25 +0000 X-ACL-Warn: Received: from lxorguk.ukuu.org.uk ([81.2.110.251]) by sog-mx-2.v43.ch3.sourceforge.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.69) id 1P9Kow-0004oJ-Sj for spi-devel-general@lists.sourceforge.net; Fri, 22 Oct 2010 16:50:25 +0000 Received: from localhost.localdomain (earthlight.etchedpixels.co.uk [81.2.110.250]) by lxorguk.ukuu.org.uk (8.14.4/8.14.1) with ESMTP id o9MGORxu016669; Fri, 22 Oct 2010 17:24:33 +0100 From: Alan Cox Subject: [PATCH] intel_mid_ssp_spi: Moorestown and Medfield SPI for SSP devices To: spi-devel-general@lists.sourceforge.net, dbrownell@users.sourceforge.net, grant.likely@secretlab.ca Date: Fri, 22 Oct 2010 16:56:29 +0100 Message-ID: <20101022155530.2739.29656.stgit@localhost.localdomain> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 X-Spam-Score: -0.3 (/) X-Spam-Report: Spam Filtering performed by mx.sourceforge.net. See http://spamassassin.org/tag/ for more details. -0.0 T_RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -0.3 AWL AWL: From: address is in the auto white-list X-Headers-End: 1P9Kow-0004oJ-Sj X-BeenThere: spi-devel-general@lists.sourceforge.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: Linux SPI core/device drivers discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: spi-devel-general-bounces@lists.sourceforge.net X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Fri, 22 Oct 2010 16:50:49 +0000 (UTC) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 78f9fd0..82e45cf 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -167,6 +167,14 @@ config SPI_IMX This enables using the Freescale i.MX SPI controllers in master mode. +config SPI_INTEL_MID_SSP + tristate "SSP SPI controller driver for Intel MID platforms (EXPERIMENTAL)" + depends on SPI_MASTER && INTEL_MID_DMAC && EXPERIMENTAL + help + This is the unified SSP SPI slave controller driver for the Intel + MID platforms, handling Moorestown & Medfield, master & slave + clock mode. + config SPI_LM70_LLP tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" depends on PARPORT && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 8bc1a5a..b427c2e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o +obj-$(CONFIG_SPI_INTEL_MID_SSP) += intel_mid_ssp_spi.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o diff --git a/drivers/spi/intel_mid_ssp_spi.c b/drivers/spi/intel_mid_ssp_spi.c new file mode 100644 index 0000000..2d6d881 --- /dev/null +++ b/drivers/spi/intel_mid_ssp_spi.c @@ -0,0 +1,1403 @@ +/* + * intel_mid_ssp_spi.c + * This driver supports Bulverde SSP core used on Intel MID platforms + * It supports SSP of Moorestown & Medfield platforms and handles clock + * slave & master modes. + * + * Copyright (c) 2010, Intel Corporation. + * Ken Mills + * Sylvain Centelles + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +/* + * Note: + * + * Supports DMA and non-interrupt polled transfers. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "intel_mid_ssp_spi.h" + +#define DRIVER_NAME "intel_mid_ssp_spi_unified" + +MODULE_AUTHOR("Ken Mills"); +MODULE_DESCRIPTION("Bulverde SSP core SPI contoller"); +MODULE_LICENSE("GPL"); + +static const struct pci_device_id pci_ids[]; + +#ifdef DUMP_RX +static void dump_trailer(const struct device *dev, char *buf, int len, int sz) +{ + int tlen1 = (len < sz ? len : sz); + int tlen2 = ((len - sz) > sz) ? sz : (len - sz); + unsigned char *p; + static char msg[MAX_SPI_TRANSFER_SIZE]; + + memset(msg, '\0', sizeof(msg)); + p = buf; + while (p < buf + tlen1) + sprintf(msg, "%s%02x", msg, (unsigned int)*p++); + + if (tlen2 > 0) { + sprintf(msg, "%s .....", msg); + p = (buf+len) - tlen2; + while (p < buf + len) + sprintf(msg, "%s%02x", msg, (unsigned int)*p++); + } + + dev_info(dev, "DUMP: %p[0:%d ... %d:%d]:%s", buf, tlen1 - 1, + len-tlen2, len - 1, msg); +} +#endif + +static inline u32 is_tx_fifo_empty(struct ssp_driver_context *drv_context) +{ + u32 sssr; + sssr = read_SSSR(drv_context->ioaddr); + if ((sssr & SSSR_TFL_MASK) || (sssr & SSSR_TNF) == 0) + return 0; + else + return 1; +} + +static inline u32 is_rx_fifo_empty(struct ssp_driver_context *drv_context) +{ + return ((read_SSSR(drv_context->ioaddr) & SSSR_RNE) == 0); +} + +static inline void disable_interface(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); +} + +static inline void disable_triggers(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + write_SSCR1(read_SSCR1(reg) & ~drv_context->cr1_sig, reg); +} + + +static void flush(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + u32 i = 0; + + /* If the transmit fifo is not empty, reset the interface. */ + if (!is_tx_fifo_empty(drv_context)) { + dev_err(&drv_context->pdev->dev, + "TX FIFO not empty. Reset of SPI IF"); + disable_interface(drv_context); + return; + } + + dev_dbg(&drv_context->pdev->dev, " SSSR=%x\r\n", read_SSSR(reg)); + while (!is_rx_fifo_empty(drv_context) && (i < SPI_FIFO_SIZE + 1)) { + read_SSDR(reg); + i++; + } + WARN(i > 0, "%d words flush occured\n", i); + + return; +} + +static int null_writer(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + u8 n_bytes = drv_context->n_bytes; + + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_context->tx == drv_context->tx_end)) + return 0; + + write_SSDR(0, reg); + drv_context->tx += n_bytes; + + return 1; +} + +static int null_reader(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + u8 n_bytes = drv_context->n_bytes; + + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_context->rx < drv_context->rx_end)) { + read_SSDR(reg); + drv_context->rx += n_bytes; + } + + return drv_context->rx == drv_context->rx_end; +} + +static int u8_writer(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_context->tx == drv_context->tx_end)) + return 0; + + write_SSDR(*(u8 *)(drv_context->tx), reg); + ++drv_context->tx; + + return 1; +} + +static int u8_reader(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_context->rx < drv_context->rx_end)) { + *(u8 *)(drv_context->rx) = read_SSDR(reg); + ++drv_context->rx; + } + + return drv_context->rx == drv_context->rx_end; +} + +static int u16_writer(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_context->tx == drv_context->tx_end)) + return 0; + + write_SSDR(*(u16 *)(drv_context->tx), reg); + drv_context->tx += 2; + + return 1; +} + +static int u16_reader(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_context->rx < drv_context->rx_end)) { + *(u16 *)(drv_context->rx) = read_SSDR(reg); + drv_context->rx += 2; + } + + return drv_context->rx == drv_context->rx_end; +} + +static int u32_writer(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) + || (drv_context->tx == drv_context->tx_end)) + return 0; + + write_SSDR(*(u32 *)(drv_context->tx), reg); + drv_context->tx += 4; + + return 1; +} + +static int u32_reader(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + while ((read_SSSR(reg) & SSSR_RNE) + && (drv_context->rx < drv_context->rx_end)) { + *(u32 *)(drv_context->rx) = read_SSDR(reg); + drv_context->rx += 4; + } + + return drv_context->rx == drv_context->rx_end; +} + +static bool chan_filter(struct dma_chan *chan, void *param) +{ + struct ssp_driver_context *drv_context = + (struct ssp_driver_context *)param; + bool ret = false; + + if (!drv_context->dmac1) + return ret; + + if (chan->device->dev == &drv_context->dmac1->dev) + ret = true; + + return ret; +} + +/** + * unmap_dma_buffers() - Unmap the DMA buffers used during the last transfer. + * @drv_context: Pointer to the private driver context + */ +static void unmap_dma_buffers(struct ssp_driver_context *drv_context) +{ + struct device *dev = &drv_context->pdev->dev; + + if (!drv_context->dma_mapped) + return; + dma_unmap_single(dev, drv_context->rx_dma, drv_context->len, + PCI_DMA_FROMDEVICE); + dma_unmap_single(dev, drv_context->tx_dma, drv_context->len, + PCI_DMA_TODEVICE); + drv_context->dma_mapped = 0; +} + +/** + * intel_mid_ssp_spi_dma_done() - End of DMA transfer callback + * @arg: Pointer to the data provided at callback registration + * + * This function is set as callback for both RX and TX DMA transfers. The + * RX or TX 'done' flag is set acording to the direction of the ended + * transfer. Then, if both RX and TX flags are set, it means that the + * transfer job is completed. + */ +static void intel_mid_ssp_spi_dma_done(void *arg) +{ + struct callback_param *cb_param = (struct callback_param *)arg; + struct ssp_driver_context *drv_context = cb_param->drv_context; + struct device *dev = &drv_context->pdev->dev; + void *reg = drv_context->ioaddr; + + if (cb_param->direction == TX_DIRECTION) + drv_context->txdma_done = 1; + else + drv_context->rxdma_done = 1; + + dev_dbg(dev, "DMA callback for direction %d [RX done:%d] [TX done:%d]\n", + cb_param->direction, drv_context->rxdma_done, + drv_context->txdma_done); + + if (drv_context->txdma_done && drv_context->rxdma_done) { + /* Clear Status Register */ + write_SSSR(drv_context->clear_sr, reg); + dev_dbg(dev, "DMA done\n"); + /* Disable Triggers to DMA or to CPU*/ + disable_triggers(drv_context); + unmap_dma_buffers(drv_context); + + queue_work(drv_context->dma_wq, &drv_context->complete_work); + } +} + +/** + * intel_mid_ssp_spi_dma_init() - Initialize DMA + * @drv_context: Pointer to the private driver context + * + * This function is called at driver setup phase to allocate DMA + * ressources. + */ +static void intel_mid_ssp_spi_dma_init(struct ssp_driver_context *drv_context) +{ + struct intel_mid_dma_slave *rxs, *txs; + struct dma_slave_config *ds; + dma_cap_mask_t mask; + struct device *dev = &drv_context->pdev->dev; + unsigned int device_id; + + /* Configure RX channel parameters */ + rxs = &drv_context->dmas_rx; + ds = &rxs->dma_slave; + + ds->direction = DMA_FROM_DEVICE; + rxs->hs_mode = LNW_DMA_HW_HS; + rxs->cfg_mode = LNW_DMA_PER_TO_MEM; + ds->dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + ds->src_addr_width = drv_context->n_bytes; + + /* Use a DMA burst according to the FIFO thresholds */ + if (drv_context->rx_fifo_threshold == 8) { + ds->src_maxburst = 8; + ds->dst_maxburst = 8; + } else if (drv_context->rx_fifo_threshold == 4) { + ds->src_maxburst = 4; + ds->dst_maxburst = 4; + } else { + ds->src_maxburst = 1; + ds->dst_maxburst = 1; + } + + /* Configure TX channel parameters */ + txs = &drv_context->dmas_tx; + ds = &txs->dma_slave; + + ds->direction = DMA_TO_DEVICE; + txs->hs_mode = LNW_DMA_HW_HS; + txs->cfg_mode = LNW_DMA_MEM_TO_PER; + ds->src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + ds->dst_addr_width = drv_context->n_bytes; + + /* Use a DMA burst according to the FIFO thresholds */ + if (drv_context->rx_fifo_threshold == 8) { + ds->src_maxburst = 8; + ds->dst_maxburst = 8; + } else if (drv_context->rx_fifo_threshold == 4) { + ds->src_maxburst = 4; + ds->dst_maxburst = 4; + } else { + ds->src_maxburst = 1; + ds->dst_maxburst = 1; + } + + /* Nothing more to do if already initialized */ + if (drv_context->dma_initialized) + return; + + /* Use DMAC1 */ + if (drv_context->quirks & QUIRKS_PLATFORM_MRST) + device_id = PCI_MRST_DMAC1_ID; + else + device_id = PCI_MDFL_DMAC1_ID; + + drv_context->dmac1 = pci_get_device(PCI_VENDOR_ID_INTEL, + device_id, NULL); + + if (!drv_context->dmac1) { + dev_err(dev, "Can't find DMAC1"); + return; + } + + if (drv_context->quirks & QUIRKS_SRAM_ADDITIONAL_CPY) { + drv_context->virt_addr_sram_rx = ioremap_nocache(SRAM_BASE_ADDR, + 2 * MAX_SPI_TRANSFER_SIZE); + if (drv_context->virt_addr_sram_rx) + drv_context->virt_addr_sram_tx = + drv_context->virt_addr_sram_rx + + MAX_SPI_TRANSFER_SIZE; + else + dev_err(dev, "Virt_addr_sram_rx is null\n"); + } + + /* 1. Allocate rx channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + dma_cap_set(DMA_SLAVE, mask); + + drv_context->rxchan = dma_request_channel(mask, chan_filter, + drv_context); + if (!drv_context->rxchan) + goto err_exit; + + drv_context->rxchan->private = rxs; + + /* 2. Allocate tx channel */ + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_MEMCPY, mask); + + drv_context->txchan = dma_request_channel(mask, chan_filter, + drv_context); + + if (!drv_context->txchan) + goto free_rxchan; + else + drv_context->txchan->private = txs; + + /* set the dma done bit to 1 */ + drv_context->txdma_done = 1; + drv_context->rxdma_done = 1; + + drv_context->tx_param.drv_context = drv_context; + drv_context->tx_param.direction = TX_DIRECTION; + drv_context->rx_param.drv_context = drv_context; + drv_context->rx_param.direction = RX_DIRECTION; + + drv_context->dma_initialized = 1; + + return; + +free_rxchan: + dma_release_channel(drv_context->rxchan); +err_exit: + dev_err(dev, "Error : DMA Channel Not available\n"); + + if (drv_context->quirks & QUIRKS_SRAM_ADDITIONAL_CPY) + iounmap(drv_context->virt_addr_sram_rx); + + pci_dev_put(drv_context->dmac1); + return; +} + +/** + * intel_mid_ssp_spi_dma_exit() - Release DMA ressources + * @drv_context: Pointer to the private driver context + */ +static void intel_mid_ssp_spi_dma_exit(struct ssp_driver_context *drv_context) +{ + dma_release_channel(drv_context->txchan); + dma_release_channel(drv_context->rxchan); + + if (drv_context->quirks & QUIRKS_SRAM_ADDITIONAL_CPY) + iounmap(drv_context->virt_addr_sram_rx); + + pci_dev_put(drv_context->dmac1); +} + +/** + * dma_transfer() - Initiate a DMA transfer + * @drv_context: Pointer to the private driver context + */ +static void dma_transfer(struct ssp_driver_context *drv_context) +{ + dma_addr_t ssdr_addr; + struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL; + struct dma_chan *txchan, *rxchan; + enum dma_ctrl_flags flag; + struct device *dev = &drv_context->pdev->dev; + + /* get Data Read/Write address */ + ssdr_addr = (dma_addr_t)(drv_context->paddr + 0x10); + + if (drv_context->tx_dma) + drv_context->txdma_done = 0; + + if (drv_context->rx_dma) + drv_context->rxdma_done = 0; + + /* 2. prepare the RX dma transfer */ + txchan = drv_context->txchan; + rxchan = drv_context->rxchan; + + flag = DMA_PREP_INTERRUPT | DMA_CTRL_ACK; + + if (likely(drv_context->quirks & QUIRKS_DMA_USE_NO_TRAIL)) { + /* Since the DMA is configured to do 32bits access */ + /* to/from the DDR, the DMA transfer size must be */ + /* a multiple of 4 bytes */ + drv_context->len_dma_rx = drv_context->len & ~(4 - 1); + drv_context->len_dma_tx = drv_context->len_dma_rx; + + /* In Rx direction, TRAIL Bytes are handled by memcpy */ + if (drv_context->rx_dma && + (drv_context->len_dma_rx > + drv_context->rx_fifo_threshold * drv_context->n_bytes)) + drv_context->len_dma_rx = + TRUNCATE(drv_context->len_dma_rx, + drv_context->rx_fifo_threshold * + drv_context->n_bytes); + else if (!drv_context->rx_dma) + dev_err(dev, "ERROR : rx_dma is null\r\n"); + } else { + /* TRAIL Bytes are handled by DMA */ + if (drv_context->rx_dma) { + drv_context->len_dma_rx = drv_context->len; + drv_context->len_dma_tx = drv_context->len; + } else { + dev_err(dev, "ERROR : drv_context->rx_dma is null!\n"); + } + } + + rxdesc = rxchan->device->device_prep_dma_memcpy + (rxchan, /* DMA Channel */ + drv_context->rx_dma, /* DAR */ + ssdr_addr, /* SAR */ + drv_context->len_dma_rx, /* Data Length */ + flag); /* Flag */ + + if (rxdesc) { + rxdesc->callback = intel_mid_ssp_spi_dma_done; + rxdesc->callback_param = &drv_context->rx_param; + } else { + dev_dbg(dev, "rxdesc is null! (len_dma_rx:%d)\n", + drv_context->len_dma_rx); + drv_context->rxdma_done = 1; + } + + /* 3. prepare the TX dma transfer */ + if (drv_context->tx_dma) { + txdesc = txchan->device->device_prep_dma_memcpy + (txchan, /* DMA Channel */ + ssdr_addr, /* DAR */ + drv_context->tx_dma, /* SAR */ + drv_context->len_dma_tx, /* Data Length */ + flag); /* Flag */ + if (txdesc) { + txdesc->callback = intel_mid_ssp_spi_dma_done; + txdesc->callback_param = &drv_context->tx_param; + } else { + dev_dbg(dev, "txdesc is null! (len_dma_tx:%d)\n", + drv_context->len_dma_tx); + drv_context->txdma_done = 1; + } + } else { + dev_err(dev, "ERROR : drv_context->tx_dma is null!\n"); + return; + } + + dev_info(dev, "DMA transfer len:%d len_dma_tx:%d len_dma_rx:%d\n", + drv_context->len, drv_context->len_dma_tx, + drv_context->len_dma_rx); + + if (rxdesc || txdesc) { + if (rxdesc) { + dev_dbg(dev, "Firing DMA RX channel\n"); + rxdesc->tx_submit(rxdesc); + } + if (txdesc) { + dev_dbg(dev, "Firing DMA TX channel\n"); + txdesc->tx_submit(txdesc); + } + } else { + struct callback_param cb_param; + cb_param.drv_context = drv_context; + dev_dbg(dev, "Bypassing DMA transfer\n"); + intel_mid_ssp_spi_dma_done(&cb_param); + } +} + +/** + * map_dma_buffers() - Map DMA buffer before a transfer + * @drv_context: Pointer to the private drivzer context + */ +static int map_dma_buffers(struct ssp_driver_context *drv_context) +{ + struct device *dev = &drv_context->pdev->dev; + + if (unlikely(drv_context->dma_mapped)) { + dev_err(dev, "ERROR : DMA buffers already mapped\n"); + return 0; + } + if (unlikely(drv_context->quirks & QUIRKS_SRAM_ADDITIONAL_CPY)) { + /* Copy drv_context->tx into sram_tx */ + memcpy_toio(drv_context->virt_addr_sram_tx, drv_context->tx, + drv_context->len); +#ifdef DUMP_RX + dump_trailer(&drv_context->pdev->dev, drv_context->tx, + drv_context->len, 16); +#endif + drv_context->rx_dma = SRAM_RX_ADDR; + drv_context->tx_dma = SRAM_TX_ADDR; + } else { + /* no QUIRKS_SRAM_ADDITIONAL_CPY */ + if (unlikely(drv_context->dma_mapped)) + return 1; + + drv_context->tx_dma = + dma_map_single(dev, drv_context->tx, drv_context->len, + PCI_DMA_TODEVICE); + if (unlikely(dma_mapping_error(dev, drv_context->tx_dma))) { + dev_err(dev, "ERROR : tx dma mapping failed\n"); + return 0; + } + + drv_context->rx_dma = + dma_map_single(dev, drv_context->rx, drv_context->len, + PCI_DMA_FROMDEVICE); + if (unlikely(dma_mapping_error(dev, drv_context->rx_dma))) { + dma_unmap_single(dev, drv_context->tx_dma, + drv_context->len, DMA_TO_DEVICE); + dev_err(dev, "ERROR : rx dma mapping failed\n"); + return 0; + } + } + return 1; +} + +/** + * drain_trail() - Handle trailing bytes of a transfer + * @drv_context: Pointer to the private driver context + * + * This function handles the trailing bytes of a transfer for the case + * they are not handled by the DMA. + */ +void drain_trail(struct ssp_driver_context *drv_context) +{ + struct device *dev = &drv_context->pdev->dev; + void *reg = drv_context->ioaddr; + + if (drv_context->len != drv_context->len_dma_rx) { + dev_dbg(dev, "Handling trailing bytes. SSSR:%08x\n", + read_SSSR(reg)); + drv_context->rx += drv_context->len_dma_rx; + drv_context->tx += drv_context->len_dma_tx; + + while ((drv_context->tx != drv_context->tx_end) || + (drv_context->rx != drv_context->rx_end)) { + drv_context->read(drv_context); + drv_context->write(drv_context); + } + } +} + +/** + * sram_to_ddr_cpy() - Copy data from Langwell SDRAM to DDR + * @drv_context: Pointer to the private driver context + */ +static void sram_to_ddr_cpy(struct ssp_driver_context *drv_context) +{ + u32 length = drv_context->len; + + if ((drv_context->quirks & QUIRKS_DMA_USE_NO_TRAIL) + && (drv_context->len > drv_context->rx_fifo_threshold * + drv_context->n_bytes)) + length = TRUNCATE(drv_context->len, + drv_context->rx_fifo_threshold * drv_context->n_bytes); + + memcpy_fromio(drv_context->rx, drv_context->virt_addr_sram_rx, length); +} + +static void int_transfer_complete(struct ssp_driver_context *drv_context) +{ + void *reg = drv_context->ioaddr; + struct spi_message *msg; + struct device *dev = &drv_context->pdev->dev; + + if (unlikely(drv_context->quirks & QUIRKS_USE_PM_QOS)) + pm_qos_update_request(&drv_context->pm_qos_req, + PM_QOS_DEFAULT_VALUE); + + if (unlikely(drv_context->quirks & QUIRKS_SRAM_ADDITIONAL_CPY)) + sram_to_ddr_cpy(drv_context); + + if (likely(drv_context->quirks & QUIRKS_DMA_USE_NO_TRAIL)) + drain_trail(drv_context); + else + /* Stop getting Time Outs */ + write_SSTO(0, reg); + + drv_context->cur_msg->status = 0; + drv_context->cur_msg->actual_length = drv_context->len; + +#ifdef DUMP_RX + dump_trailer(dev, drv_context->rx, drv_context->len, 16); +#endif + + dev_dbg(dev, "End of transfer. SSSR:%08X\n", read_SSSR(reg)); + msg = drv_context->cur_msg; + if (likely(msg->complete)) + msg->complete(msg->context); +} + +static void int_transfer_complete_work(struct work_struct *work) +{ + struct ssp_driver_context *drv_context = container_of(work, + struct ssp_driver_context, complete_work); + + int_transfer_complete(drv_context); +} + +static void poll_transfer_complete(struct ssp_driver_context *drv_context) +{ + struct spi_message *msg; + + /* Update total byte transfered return count actual bytes read */ + drv_context->cur_msg->actual_length += + drv_context->len - (drv_context->rx_end - drv_context->rx); + + drv_context->cur_msg->status = 0; + + msg = drv_context->cur_msg; + if (likely(msg->complete)) + msg->complete(msg->context); +} + +/** + * ssp_int() - Interrupt handler + * @irq + * @dev_id + * + * The SSP interrupt is not used for transfer which are handled by + * DMA or polling: only under/over run are catched to detect + * broken transfers. + */ +static irqreturn_t ssp_int(int irq, void *dev_id) +{ + struct ssp_driver_context *drv_context = dev_id; + void *reg = drv_context->ioaddr; + struct device *dev = &drv_context->pdev->dev; + u32 status = read_SSSR(reg); + + /* It should never be our interrupt since SSP will */ + /* only trigs interrupt for under/over run. */ + if (likely(!(status & drv_context->mask_sr))) + return IRQ_NONE; + + if (status & SSSR_ROR || status & SSSR_TUR) { + dev_err(dev, "--- SPI ROR or TUR occurred : SSSR=%x\n", status); + WARN_ON(1); + if (status & SSSR_ROR) + dev_err(dev, "we have Overrun\n"); + if (status & SSSR_TUR) + dev_err(dev, "we have Underrun\n"); + } + + /* We can fall here when not using DMA mode */ + if (!drv_context->cur_msg) { + disable_interface(drv_context); + disable_triggers(drv_context); + } + /* clear status register */ + write_SSSR(drv_context->clear_sr, reg); + return IRQ_HANDLED; +} + +static void poll_transfer(unsigned long data) +{ + struct ssp_driver_context *drv_context = + (struct ssp_driver_context *)data; + + if (drv_context->tx) + while (drv_context->tx != drv_context->tx_end) { + drv_context->write(drv_context); + drv_context->read(drv_context); + } + + while (!drv_context->read(drv_context)) + cpu_relax(); + + poll_transfer_complete(drv_context); +} + +/** + * start_bitbanging() - Clock synchronization by bit banging + * @drv_context: Pointer to private driver context + * + * This clock synchronization will be removed as soon as it is + * handled by the SCU. + */ +static void start_bitbanging(struct ssp_driver_context *drv_context) +{ + u32 sssr; + u32 count = 0; + u32 cr0; + void *i2c_reg = drv_context->I2C_ioaddr; + struct device *dev = &drv_context->pdev->dev; + void *reg = drv_context->ioaddr; + struct chip_data *chip = spi_get_ctldata(drv_context->cur_msg->spi); + cr0 = chip->cr0; + + dev_warn(dev, "In %s : Starting bit banging\n",\ + __func__); + if (read_SSSR(reg) & SSP_NOT_SYNC) + dev_warn(dev, "SSP clock desynchronized.\n"); + if (!(read_SSCR0(reg) & SSCR0_SSE)) + dev_warn(dev, "in SSCR0, SSP disabled.\n"); + + dev_dbg(dev, "SSP not ready, start CLK sync\n"); + + write_SSCR0(cr0 & ~SSCR0_SSE, reg); + write_SSPSP(0x02010007, reg); + + write_SSTO(chip->timeout, reg); + write_SSCR0(cr0, reg); + + /* + * This routine uses the DFx block to override the SSP inputs + * and outputs allowing us to bit bang SSPSCLK. On Langwell, + * we have to generate the clock to clear busy. + */ + write_I2CDATA(0x3, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CCTRL(0x01070034, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CDATA(0x00000099, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CCTRL(0x01070038, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + sssr = read_SSSR(reg); + + /* Bit bang the clock until CSS clears */ + while ((sssr & 0x400000) && (count < MAX_BITBANGING_LOOP)) { + write_I2CDATA(0x2, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CCTRL(0x01070034, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CDATA(0x3, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CCTRL(0x01070034, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + sssr = read_SSSR(reg); + count++; + } + if (count >= MAX_BITBANGING_LOOP) + dev_err(dev, "ERROR in %s : infinite loop \ + on bit banging. Aborting\n", __func__); + + dev_dbg(dev, "---Bit bang count=%d\n", count); + + write_I2CDATA(0x0, i2c_reg); + udelay(I2C_ACCESS_USDELAY); + write_I2CCTRL(0x01070038, i2c_reg); +} + +static unsigned int ssp_get_clk_div(int speed) +{ + return max(100000000 / speed, 4) - 1; +} + +/** + * transfer() - Start a SPI transfer + * @spi: Pointer to the spi_device struct + * @msg: Pointer to the spi_message struct + */ +static int transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct ssp_driver_context *drv_context = \ + spi_master_get_devdata(spi->master); + struct chip_data *chip = NULL; + struct spi_transfer *transfer = NULL; + void *reg = drv_context->ioaddr; + u32 cr1; + struct device *dev = &drv_context->pdev->dev; + chip = spi_get_ctldata(msg->spi); + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + drv_context->cur_msg = msg; + + /* We handle only one transfer message since the protocol module has to + control the out of band signaling. */ + transfer = list_entry(msg->transfers.next, + struct spi_transfer, + transfer_list); + + /* Check transfer length */ + if (unlikely((transfer->len > MAX_SPI_TRANSFER_SIZE) || + (transfer->len == 0))) { + dev_warn(dev, "transfer length null or greater than %d\n", + MAX_SPI_TRANSFER_SIZE); + dev_warn(dev, "length = %d\n", transfer->len); + msg->status = -EINVAL; + + if (msg->complete) + msg->complete(msg->context); + + return 0; + } + + /* Flush any remaining data (in case of failed previous transfer) */ + flush(drv_context); + + drv_context->tx = (void *)transfer->tx_buf; + drv_context->rx = (void *)transfer->rx_buf; + drv_context->len = transfer->len; + drv_context->write = chip->write; + drv_context->read = chip->read; + + if (likely(chip->dma_enabled)) { + drv_context->dma_mapped = map_dma_buffers(drv_context); + if (unlikely(!drv_context->dma_mapped)) + return 0; + } else { + drv_context->write = drv_context->tx ? + chip->write : null_writer; + drv_context->read = drv_context->rx ? + chip->read : null_reader; + } + drv_context->tx_end = drv_context->tx + transfer->len; + drv_context->rx_end = drv_context->rx + transfer->len; + + /* Clear status */ + write_SSSR(drv_context->clear_sr, reg); + + /* setup the CR1 control register */ + cr1 = chip->cr1 | drv_context->cr1_sig; + + if (likely(drv_context->quirks & QUIRKS_DMA_USE_NO_TRAIL)) { + /* in case of len smaller than burst size, adjust the RX */ + /* threshold. All other cases will use the default threshold */ + /* value. The RX fifo threshold must be aligned with the DMA */ + /* RX transfer size, which may be limited to a multiple of 4 */ + /* bytes due to 32bits DDR access. */ + if (drv_context->len / drv_context->n_bytes <= + drv_context->rx_fifo_threshold) { + u32 rx_fifo_threshold; + + rx_fifo_threshold = (drv_context->len & ~(4 - 1)) / + drv_context->n_bytes; + cr1 &= ~(SSCR1_RFT); + cr1 |= SSCR1_RxTresh(rx_fifo_threshold) + & SSCR1_RFT; + } else { + write_SSTO(chip->timeout, reg); + } + } + + dev_dbg(dev, + "transfer len:%d n_bytes:%d cr0:%x cr1:%x", + drv_context->len, drv_context->n_bytes, chip->cr0, cr1); + + /* first set CR1 */ + write_SSCR1(cr1, reg); + + /* Do bitbanging only if SSP not-enabled or not-synchronized */ + if (unlikely(((read_SSSR(reg) & SSP_NOT_SYNC) || + (!(read_SSCR0(reg) & SSCR0_SSE))) && + (drv_context->quirks & QUIRKS_BIT_BANGING))) { + start_bitbanging(drv_context); + } else { + /* (re)start the SSP */ + write_SSCR0(chip->cr0, reg); + } + + if (likely(chip->dma_enabled)) { + if (unlikely(drv_context->quirks & QUIRKS_USE_PM_QOS)) + pm_qos_update_request(&drv_context->pm_qos_req, + MIN_EXIT_LATENCY); + dma_transfer(drv_context); + } else { + tasklet_schedule(&drv_context->poll_transfer); + } + + return 0; +} + +/** + * setup() - Driver setup procedure + * @spi: Pointeur to the spi_device struct + */ +static int setup(struct spi_device *spi) +{ + struct intel_mid_ssp_spi_chip *chip_info = NULL; + struct chip_data *chip; + struct ssp_driver_context *drv_context = + spi_master_get_devdata(spi->master); + u32 tx_fifo_threshold; + u32 burst_size; + u32 clk_div; + + if (!spi->bits_per_word) + spi->bits_per_word = DFLT_BITS_PER_WORD; + + if ((spi->bits_per_word < MIN_BITS_PER_WORD + || spi->bits_per_word > MAX_BITS_PER_WORD)) + return -EINVAL; + + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, + "failed setup: can't allocate chip data\n"); + return -ENOMEM; + } + } + chip->cr0 = SSCR0_Motorola | SSCR0_DataSize(spi->bits_per_word > 16 ? + spi->bits_per_word - 16 : spi->bits_per_word) + | SSCR0_SSE + | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); + + /* protocol drivers may change the chip settings, so... */ + /* if chip_info exists, use it */ + chip_info = spi->controller_data; + + /* chip_info isn't always needed */ + chip->cr1 = 0; + if (chip_info) { + burst_size = chip_info->burst_size; + if (burst_size > IMSS_FIFO_BURST_8) + burst_size = DFLT_FIFO_BURST_SIZE; + + chip->timeout = chip_info->timeout; + + if (chip_info->enable_loopback) + chip->cr1 |= SSCR1_LBM; + + chip->dma_enabled = chip_info->dma_enabled; + + } else { + /* if no chip_info provided by protocol driver, */ + /* set default values */ + dev_info(&spi->dev, "setting default chip values\n"); + + burst_size = DFLT_FIFO_BURST_SIZE; + + chip->dma_enabled = 1; + if (drv_context->quirks & QUIRKS_DMA_USE_NO_TRAIL) + chip->timeout = 0; + else + chip->timeout = DFLT_TIMEOUT_VAL; + } + /* Set FIFO thresholds according to burst_size */ + if (burst_size == IMSS_FIFO_BURST_8) + drv_context->rx_fifo_threshold = 8; + else if (burst_size == IMSS_FIFO_BURST_4) + drv_context->rx_fifo_threshold = 4; + else + drv_context->rx_fifo_threshold = 1; + tx_fifo_threshold = SPI_FIFO_SIZE - drv_context->rx_fifo_threshold; + chip->cr1 |= (SSCR1_RxTresh(drv_context->rx_fifo_threshold) & + SSCR1_RFT) | (SSCR1_TxTresh(tx_fifo_threshold) & + SSCR1_TFT); + + drv_context->dma_mapped = 0; + + /* setting phase and polarity. spi->mode comes from boardinfo */ + if ((spi->mode & SPI_CPHA) != 0) + chip->cr1 |= SSCR1_SPH; + if ((spi->mode & SPI_CPOL) != 0) + chip->cr1 |= SSCR1_SPO; + + if (drv_context->quirks & QUIRKS_SPI_SLAVE_CLOCK_MODE) + /* set slave mode */ + chip->cr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR; + chip->cr1 |= SSCR1_SCFR; /* clock is not free running */ + + dev_dbg(&spi->dev, "%d bits/word, mode %d\n", + spi->bits_per_word, + spi->mode & 0x3); + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->read = u16_reader; + chip->write = u16_writer; + } else if (spi->bits_per_word <= 32) { + chip->cr0 |= SSCR0_EDSS; + chip->n_bytes = 4; + chip->read = u32_reader; + chip->write = u32_writer; + } else { + dev_err(&spi->dev, "invalid wordsize\n"); + return -EINVAL; + } + + if ((drv_context->quirks & QUIRKS_SPI_SLAVE_CLOCK_MODE) == 0) { + chip->speed_hz = spi->max_speed_hz; + clk_div = ssp_get_clk_div(chip->speed_hz); + chip->cr0 |= clk_div << 8; + } + chip->bits_per_word = spi->bits_per_word; + + spi_set_ctldata(spi, chip); + + /* setup of drv_context members that will not change across transfers */ + drv_context->n_bytes = chip->n_bytes; + + if (chip->dma_enabled) { + intel_mid_ssp_spi_dma_init(drv_context); + drv_context->cr1_sig = SSCR1_TSRE | SSCR1_RSRE; + drv_context->mask_sr = SSSR_ROR | SSSR_TUR; + if (drv_context->quirks & QUIRKS_DMA_USE_NO_TRAIL) + drv_context->cr1_sig |= SSCR1_TRAIL; + } else { + drv_context->cr1_sig = SSCR1_RIE | SSCR1_TIE | SSCR1_TINTE; + drv_context->mask_sr = SSSR_RFS | SSSR_TFS | + SSSR_ROR | SSSR_TUR | SSSR_TINT; + } + drv_context->clear_sr = SSSR_TUR | SSSR_ROR | SSSR_TINT; + + return 0; +} + +/** + * cleanup() - Driver cleanup procedure + * @spi: Pointer to the spi_device struct + */ +static void cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + struct ssp_driver_context *drv_context = + spi_master_get_devdata(spi->master); + + if (drv_context->dma_initialized) + intel_mid_ssp_spi_dma_exit(drv_context); + + /* Remove the PM_QOS request */ + if (drv_context->quirks & QUIRKS_USE_PM_QOS) + pm_qos_remove_request(&drv_context->pm_qos_req); + + kfree(chip); + spi_set_ctldata(spi, NULL); +} + +/** + * intel_mid_ssp_spi_probe() - Driver probe procedure + * @pdev: Pointer to the pci_dev struct + * @ent: Pointer to the pci_device_id struct + */ +static int intel_mid_ssp_spi_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct device *dev = &pdev->dev; + struct spi_master *master; + struct ssp_driver_context *drv_context = 0; + int status; + u32 iolen = 0; + u8 ssp_cfg; + int pos; + void __iomem *syscfg_ioaddr; + unsigned long syscfg; + + /* Check if the SSP we are probed for has been allocated */ + /* to operate as SPI. This information is retreived from */ + /* the field adid of the Vendor-Specific PCI capability */ + /* which is used as a configuration register. */ + pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR); + if (pos > 0) { + pci_read_config_byte(pdev, + pos + VNDR_CAPABILITY_ADID_OFFSET, + &ssp_cfg); + } else { + dev_info(dev, "No Vendor Specific PCI capability\n"); + goto err_abort_probe; + } + if (SSP_CFG_GET_MODE(ssp_cfg) != SSP_CFG_SPI_MODE_ID) { + dev_info(dev, "Unsupported SSP mode (%02xh)\n", + ssp_cfg); + goto err_abort_probe; + } + + dev_info(dev, "found PCI SSP controller" + " (ID: %04xh:%04xh cfg: %02xh)\n", + pdev->vendor, pdev->device, ssp_cfg); + + status = pci_enable_device(pdev); + if (status) + return status; + + /* Allocate Slave with space for drv_context and null dma buffer */ + master = spi_alloc_master(dev, sizeof(struct ssp_driver_context)); + + if (!master) { + dev_err(dev, "cannot alloc spi_slave\n"); + status = -ENOMEM; + goto err_free_0; + } + + drv_context = spi_master_get_devdata(master); + drv_context->master = master; + + drv_context->pdev = pdev; + drv_context->quirks = ent->driver_data; + + /* Set platform & configuration quirks */ + if (drv_context->quirks & QUIRKS_PLATFORM_MRST) { + /* Apply bit banging workarround on MRST */ + drv_context->quirks |= QUIRKS_BIT_BANGING; + /* MRST slave mode workarrounds */ + if (SSP_CFG_IS_SPI_SLAVE(ssp_cfg)) + drv_context->quirks |= + QUIRKS_USE_PM_QOS | + QUIRKS_SRAM_ADDITIONAL_CPY; + } + drv_context->quirks |= QUIRKS_DMA_USE_NO_TRAIL; + if (SSP_CFG_IS_SPI_SLAVE(ssp_cfg)) + drv_context->quirks |= QUIRKS_SPI_SLAVE_CLOCK_MODE; + + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->bus_num = SSP_CFG_GET_SPI_BUS_NB(ssp_cfg); + master->num_chipselect = 1; + master->cleanup = cleanup; + master->setup = setup; + master->transfer = transfer; + drv_context->dma_wq = create_workqueue("intel_mid_ssp_spi"); + INIT_WORK(&drv_context->complete_work, int_transfer_complete_work); + + drv_context->dma_initialized = 0; + + /* get basic io resource and map it */ + drv_context->paddr = pci_resource_start(pdev, 0); + iolen = pci_resource_len(pdev, 0); + + status = pci_request_region(pdev, 0, dev_name(&pdev->dev)); + if (status) + goto err_free_1; + + drv_context->ioaddr = + ioremap_nocache(drv_context->paddr, iolen); + if (!drv_context->ioaddr) { + status = -ENOMEM; + goto err_free_2; + } + dev_dbg(dev, "paddr = : %08lx", drv_context->paddr); + dev_dbg(dev, "ioaddr = : %p\n", drv_context->ioaddr); + dev_dbg(dev, "attaching to IRQ: %04x\n", pdev->irq); + dev_dbg(dev, "quirks = : %08lx\n", drv_context->quirks); + + if (drv_context->quirks & QUIRKS_BIT_BANGING) { + /* Bit banging on the clock is done through */ + /* DFT which is available through I2C. */ + /* get base address of I2C_Serbus registers */ + drv_context->I2C_paddr = 0xff12b000; + drv_context->I2C_ioaddr = + ioremap_nocache(drv_context->I2C_paddr, 0x10); + if (!drv_context->I2C_ioaddr) { + status = -ENOMEM; + goto err_free_3; + } + } + + /* Attach to IRQ */ + drv_context->irq = pdev->irq; + status = request_irq(drv_context->irq, ssp_int, IRQF_SHARED, + "intel_mid_ssp_spi", drv_context); + if (status < 0) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_free_4; + } + + if (drv_context->quirks & QUIRKS_PLATFORM_MDFL) { + /* get base address of DMA selector. */ + syscfg = drv_context->paddr - SYSCFG; + syscfg_ioaddr = ioremap_nocache(syscfg, 0x10); + if (!syscfg_ioaddr) { + status = -ENOMEM; + goto err_free_5; + } + iowrite32(ioread32(syscfg_ioaddr) | 2, syscfg_ioaddr); + } + + tasklet_init(&drv_context->poll_transfer, poll_transfer, + (unsigned long)drv_context); + + /* Register with the SPI framework */ + dev_info(dev, "register with SPI framework (bus spi%d)\n", + master->bus_num); + + status = spi_register_master(master); + + if (status != 0) { + dev_err(dev, "problem registering spi\n"); + goto err_free_5; + } + + pci_set_drvdata(pdev, drv_context); + + /* Create the PM_QOS request */ + if (drv_context->quirks & QUIRKS_USE_PM_QOS) + pm_qos_add_request(&drv_context->pm_qos_req, + PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); + + return status; + +err_free_5: + free_irq(drv_context->irq, drv_context); +err_free_4: + iounmap(drv_context->I2C_ioaddr); +err_free_3: + iounmap(drv_context->ioaddr); +err_free_2: + pci_release_region(pdev, 0); +err_free_1: + spi_master_put(master); +err_free_0: + pci_disable_device(pdev); + + return status; +err_abort_probe: + dev_info(dev, "Abort probe for SSP %04xh:%04xh\n", + pdev->vendor, pdev->device); + return -ENODEV; +} + +/** + * intel_mid_ssp_spi_remove() - driver remove procedure + * @pdev: Pointer to the pci_dev struct + */ +static void __devexit intel_mid_ssp_spi_remove(struct pci_dev *pdev) +{ + struct ssp_driver_context *drv_context = pci_get_drvdata(pdev); + + if (!drv_context) + return; + + /* Release IRQ */ + free_irq(drv_context->irq, drv_context); + + iounmap(drv_context->ioaddr); + if (drv_context->quirks & QUIRKS_BIT_BANGING) + iounmap(drv_context->I2C_ioaddr); + + /* disconnect from the SPI framework */ + spi_unregister_master(drv_context->master); + + pci_set_drvdata(pdev, NULL); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + + return; +} + +#ifdef CONFIG_PM +/** + * intel_mid_ssp_spi_suspend() - Driver suspend procedure + * @pdev: Pointer to the pci_dev struct + * @state: pm_message_t + */ +static int intel_mid_ssp_spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ssp_driver_context *drv_context = pci_get_drvdata(pdev); + dev_dbg(&pdev->dev, "suspend\n"); + + tasklet_disable(&drv_context->poll_transfer); + + return 0; +} + +/** + * intel_mid_ssp_spi_resume() - Driver resume procedure + * @pdev: Pointer to the pci_dev struct + */ +static int intel_mid_ssp_spi_resume(struct pci_dev *pdev) +{ + struct ssp_driver_context *drv_context = pci_get_drvdata(pdev); + dev_dbg(&pdev->dev, "resume\n"); + + tasklet_enable(&drv_context->poll_transfer); + + return 0; +} +#else +#define intel_mid_ssp_spi_suspend NULL +#define intel_mid_ssp_spi_resume NULL +#endif /* CONFIG_PM */ + + +static const struct pci_device_id pci_ids[] __devinitdata = { + /* MRST SSP0 */ + { PCI_VDEVICE(INTEL, 0x0815), QUIRKS_PLATFORM_MRST}, + /* MDFL SSP0 */ + { PCI_VDEVICE(INTEL, 0x0832), QUIRKS_PLATFORM_MDFL}, + /* MDFL SSP1 */ + { PCI_VDEVICE(INTEL, 0x0825), QUIRKS_PLATFORM_MDFL}, + /* MDFL SSP3 */ + { PCI_VDEVICE(INTEL, 0x0816), QUIRKS_PLATFORM_MDFL}, + {}, +}; + +static struct pci_driver intel_mid_ssp_spi_driver = { + .name = DRIVER_NAME, + .id_table = pci_ids, + .probe = intel_mid_ssp_spi_probe, + .remove = __devexit_p(intel_mid_ssp_spi_remove), + .suspend = intel_mid_ssp_spi_suspend, + .resume = intel_mid_ssp_spi_resume, +}; + +static int __init intel_mid_ssp_spi_init(void) +{ + return pci_register_driver(&intel_mid_ssp_spi_driver); +} + +late_initcall(intel_mid_ssp_spi_init); + +static void __exit intel_mid_ssp_spi_exit(void) +{ + pci_unregister_driver(&intel_mid_ssp_spi_driver); +} + +module_exit(intel_mid_ssp_spi_exit); + diff --git a/drivers/spi/intel_mid_ssp_spi.h b/drivers/spi/intel_mid_ssp_spi.h new file mode 100644 index 0000000..aef2fa8 --- /dev/null +++ b/drivers/spi/intel_mid_ssp_spi.h @@ -0,0 +1,321 @@ +/* + * Copyright (C) Intel 2009 + * Ken Mills + * Sylvain Centelles + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ +#ifndef INTEL_MID_SSP_SPI_H_ +#define INTEL_MID_SSP_SPI_H_ + +#define PCI_MRST_DMAC1_ID 0x0814 +#define PCI_MDFL_DMAC1_ID 0x0827 + +#define SSP_NOT_SYNC 0x400000 +#define MAX_SPI_TRANSFER_SIZE 8192 +#define MAX_BITBANGING_LOOP 10000 +#define SPI_FIFO_SIZE 16 + +/* PM QoS define */ +#define MIN_EXIT_LATENCY 20 + +/* SSP assignement configuration from PCI config */ +#define SSP_CFG_GET_MODE(ssp_cfg) ((ssp_cfg) & 0x07) +#define SSP_CFG_GET_SPI_BUS_NB(ssp_cfg) (((ssp_cfg) >> 3) & 0x07) +#define SSP_CFG_IS_SPI_SLAVE(ssp_cfg) ((ssp_cfg) & 0x40) +#define SSP_CFG_SPI_MODE_ID 1 +/* adid field offset is 6 inside the vendor specific capability */ +#define VNDR_CAPABILITY_ADID_OFFSET 6 + +/* Driver's quirk flags */ +/* This workarround bufferizes data in the audio fabric SDRAM from */ +/* where the DMA transfers will operate. Should be enabled only for */ +/* SPI slave mode. */ +#define QUIRKS_SRAM_ADDITIONAL_CPY 1 +/* If set the trailing bytes won't be handled by the DMA. */ +/* Trailing byte feature not fully available. */ +#define QUIRKS_DMA_USE_NO_TRAIL 2 +/* If set, the driver will use PM_QOS to reduce the latency */ +/* introduced by the deeper C-states which may produce over/under */ +/* run issues. Must be used in slave mode. In master mode, the */ +/* latency is not critical, but setting this workarround may */ +/* improve the SPI throughput. */ +#define QUIRKS_USE_PM_QOS 4 +/* This quirks is set on Moorestown */ +#define QUIRKS_PLATFORM_MRST 8 +/* This quirks is set on Medfield */ +#define QUIRKS_PLATFORM_MDFL 16 +/* If set, the driver will apply the bitbanging workarround needed */ +/* to enable defective Langwell stepping A SSP. The defective SSP */ +/* can be enabled only once, and should never be disabled. */ +#define QUIRKS_BIT_BANGING 32 +/* If set, SPI is in slave clock mode */ +#define QUIRKS_SPI_SLAVE_CLOCK_MODE 64 + +/* Uncomment to get RX and TX short dumps after each transfer */ +/* #define DUMP_RX 1 */ +#define MAX_TRAILING_BYTE_RETRY 16 +#define MAX_TRAILING_BYTE_LOOP 100 +#define DELAY_TO_GET_A_WORD 3 +#define DFLT_TIMEOUT_VAL 500 + +#define DEFINE_SSP_REG(reg, off) \ +static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \ +static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); } + +#define RX_DIRECTION 0 +#define TX_DIRECTION 1 + +#define I2C_ACCESS_USDELAY 10 + +#define DFLT_BITS_PER_WORD 16 +#define MIN_BITS_PER_WORD 4 +#define MAX_BITS_PER_WORD 32 +#define DFLT_FIFO_BURST_SIZE IMSS_FIFO_BURST_8 + +#define TRUNCATE(x, a) ((x) & ~((a)-1)) + +DEFINE_SSP_REG(SSCR0, 0x00) +DEFINE_SSP_REG(SSCR1, 0x04) +DEFINE_SSP_REG(SSSR, 0x08) +DEFINE_SSP_REG(SSITR, 0x0c) +DEFINE_SSP_REG(SSDR, 0x10) +DEFINE_SSP_REG(SSTO, 0x28) +DEFINE_SSP_REG(SSPSP, 0x2c) + +DEFINE_SSP_REG(I2CCTRL, 0x00); +DEFINE_SSP_REG(I2CDATA, 0x04); + +DEFINE_SSP_REG(GPLR1, 0x04); +DEFINE_SSP_REG(GPDR1, 0x0c); +DEFINE_SSP_REG(GPSR1, 0x14); +DEFINE_SSP_REG(GPCR1, 0x1C); +DEFINE_SSP_REG(GAFR1_U, 0x44); + +#define SYSCFG 0x20bc0 + +#define SRAM_BASE_ADDR 0xfffdc000 +#define SRAM_RX_ADDR SRAM_BASE_ADDR +#define SRAM_TX_ADDR (SRAM_BASE_ADDR + MAX_SPI_TRANSFER_SIZE) + +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's SPI mode */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ + +#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ +#define SSCR0_EDSS (1 << 20) /* Extended data size select */ +#define SSCR0_NCS (1 << 21) /* Network clock select */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun int mask */ +#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun int mask */ +#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame */ +#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Tx FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Rx FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Tx FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Rx FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Rx FIFO Overrun */ +#define SSSR_TFL_MASK (0x0F << 8) /* Tx FIFO level field mask */ + +#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Int Mask */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run int Mask */ +#define SSCR0_NCS (1 << 21) /* Network Clock Select */ +#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ + +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ +#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ +#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ +#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ +#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ +#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ +#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_PINTE (1 << 18) /* Trailing Byte Interupt Enable */ +#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ +#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ + +#define SSSR_BCE (1 << 23) /* Bit Count Error */ +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ +#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ +#define SSSR_EOC (1 << 20) /* End Of Chain */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ + +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x)((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ + +/* + * For testing SSCR1 changes that require SSP restart, basically + * everything except the service and interrupt enables + */ + +#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ + | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ + | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \ + | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \ + | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ + | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) + +struct callback_param { + void *drv_context; + u32 direction; +}; + +struct ssp_driver_context { + /* Driver model hookup */ + struct pci_dev *pdev; + + /* SPI framework hookup */ + struct spi_master *master; + + /* SSP register addresses */ + unsigned long paddr; + void *ioaddr; + int irq; + + /* I2C registers */ + dma_addr_t I2C_paddr; + void *I2C_ioaddr; + + /* SSP masks*/ + u32 cr1_sig; + u32 cr1; + u32 clear_sr; + u32 mask_sr; + + /* PM_QOS request */ + struct pm_qos_request_list pm_qos_req; + + struct tasklet_struct poll_transfer; + + spinlock_t lock; + + /* Current message transfer state info */ + struct spi_message *cur_msg; + size_t len; + size_t len_dma_rx; + size_t len_dma_tx; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + bool dma_initialized; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + u8 n_bytes; + int (*write)(struct ssp_driver_context *drv_context); + int (*read)(struct ssp_driver_context *drv_context); + + struct intel_mid_dma_slave dmas_tx; + struct intel_mid_dma_slave dmas_rx; + struct dma_chan *txchan; + struct dma_chan *rxchan; + struct workqueue_struct *dma_wq; + struct work_struct complete_work; + + u8 __iomem *virt_addr_sram_tx; + u8 __iomem *virt_addr_sram_rx; + + int txdma_done; + int rxdma_done; + struct callback_param tx_param; + struct callback_param rx_param; + struct pci_dev *dmac1; + + unsigned long quirks; + u32 rx_fifo_threshold; +}; + +struct chip_data { + u32 cr0; + u32 cr1; + u32 timeout; + u8 n_bytes; + u8 dma_enabled; + u8 bits_per_word; + u32 speed_hz; + int (*write)(struct ssp_driver_context *drv_context); + int (*read)(struct ssp_driver_context *drv_context); +}; + + +enum intel_mid_ssp_spi_fifo_burst { + IMSS_FIFO_BURST_1, + IMSS_FIFO_BURST_4, + IMSS_FIFO_BURST_8 +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct intel_mid_ssp_spi_chip { + enum intel_mid_ssp_spi_fifo_burst burst_size; + u32 timeout; + u8 enable_loopback; + u8 dma_enabled; +}; + + +#define SPI_DIB_NAME_LEN 16 +#define SPI_DIB_SPEC_INFO_LEN 10 + +struct spi_dib_header { + u32 signature; + u32 length; + u8 rev; + u8 checksum; + u8 dib[0]; +} __attribute__((packed)); + +#endif /*INTEL_MID_SSP_SPI_H_*/