diff mbox

spi-topcliff-pch: Fix Kconfig dependencies

Message ID 20140516164718.5ea30de0@endymion.delvare (mailing list archive)
State Accepted
Commit 2b16069a7af4a4e6f6c2e599afe1301d0655487e
Headers show

Commit Message

Jean Delvare May 16, 2014, 2:47 p.m. UTC
The spi-topcliff-pch driver is for a companion chip to the Intel Atom
E600 series processors. These are 32-bit x86 processors so the driver
is only needed on X86_32. Add COMPILE_TEST as an alternative, so that
the driver can still be build-tested elsewhere.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mark Brown <broonie@kernel.org>
---
 drivers/spi/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Mark Brown May 16, 2014, 7:08 p.m. UTC | #1
On Fri, May 16, 2014 at 04:47:18PM +0200, Jean Delvare wrote:
> The spi-topcliff-pch driver is for a companion chip to the Intel Atom
> E600 series processors. These are 32-bit x86 processors so the driver
> is only needed on X86_32. Add COMPILE_TEST as an alternative, so that
> the driver can still be build-tested elsewhere.

Applied, thanks.
diff mbox

Patch

--- linux-3.15-rc5.orig/drivers/spi/Kconfig	2014-04-14 09:42:30.897098903 +0200
+++ linux-3.15-rc5/drivers/spi/Kconfig	2014-05-16 16:38:44.332233218 +0200
@@ -505,7 +505,7 @@  config SPI_TEGRA20_SLINK
 
 config SPI_TOPCLIFF_PCH
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	help
 	  SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
 	  used in some x86 embedded processors.