diff mbox

[1/2] spi: atmel: factorize reusable code for SPI controller init

Message ID 20170414082243.23002-1-quentin.schulz@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Quentin Schulz April 14, 2017, 8:22 a.m. UTC 
The SPI controller configuration during the init can be reused, for the
resume function for example.

Let's move this configuration to a separate function.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
 drivers/spi/spi-atmel.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

Comments

Alexandre Belloni April 14, 2017, 10:35 a.m. UTC | #1 
On 14/04/2017 at 10:22:42 +0200, Quentin Schulz wrote:
> The SPI controller configuration during the init can be reused, for the
> resume function for example.
> 
> Let's move this configuration to a separate function.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Note that this one has already been applied.
Mark Brown April 14, 2017, 5:03 p.m. UTC | #2 
On Fri, Apr 14, 2017 at 10:22:42AM +0200, Quentin Schulz wrote:
> The SPI controller configuration during the init can be reused, for the
> resume function for example.

Please don't resubmit patches that have already been applied, you should
submit patches against current code in the tree you're expecting things
to be applied to.  If any updates are needed to a patch that's already
been applied you should submit incremental patches which make those
updates.  This avoids having to change published git commits which could
cause problems for people working against git.
diff mbox

Patch

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 0e7712b..247d920 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1464,6 +1464,25 @@  static int atmel_spi_gpio_cs(struct platform_device *pdev)
 	return 0;
 }
 
+static void atmel_spi_init(struct atmel_spi *as)
+{
+	spi_writel(as, CR, SPI_BIT(SWRST));
+	spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+	if (as->caps.has_wdrbt) {
+		spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
+				| SPI_BIT(MSTR));
+	} else {
+		spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
+	}
+
+	if (as->use_pdc)
+		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+	spi_writel(as, CR, SPI_BIT(SPIEN));
+
+	if (as->fifo_size)
+		spi_writel(as, CR, SPI_BIT(FIFOEN));
+}
+
 static int atmel_spi_probe(struct platform_device *pdev)
 {
 	struct resource		*regs;
@@ -1572,26 +1591,14 @@  static int atmel_spi_probe(struct platform_device *pdev)
 
 	as->spi_clk = clk_get_rate(clk);
 
-	spi_writel(as, CR, SPI_BIT(SWRST));
-	spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
-	if (as->caps.has_wdrbt) {
-		spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
-				| SPI_BIT(MSTR));
-	} else {
-		spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
-	}
-
-	if (as->use_pdc)
-		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-	spi_writel(as, CR, SPI_BIT(SPIEN));
-
 	as->fifo_size = 0;
 	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
 				  &as->fifo_size)) {
 		dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
-		spi_writel(as, CR, SPI_BIT(FIFOEN));
 	}
 
+	atmel_spi_init(as);
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);