diff mbox

spi: document broadcom qspi driver as broken

Message ID 20170721220142.3400093-1-arnd@arndb.de (mailing list archive)
State New, archived
Headers show

Commit Message

Arnd Bergmann July 21, 2017, 10 p.m. UTC
The newly broadcom qspi driver in drivers/spi produces a build
warning when CONFIG_MTD is disabled:

include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]

I had suggested a workaround earlier, but Cyrille Pitchen explained
that actually the broadcom qspi is broken here and needs to be
fixed, see the lenghthy reply in patchwork.

As nothing has happened on that driver, this tries to at least
avoid the build failure, by marking the driver as broken unless
CONFIG_MTD is enabled. Also, I add a WARN_ON_ONCE runtime
that triggers when the spi-nor framework and the driver disagree
about the command opcode, which was one of several issues that
Cyrille pointed out.

My patch does not attempt to fix any of the actual bugs though,
it just tries to avoid the build error while highlighting the
problems. Ideally, someone would step up to create a tested
fix. If that doesn't happen, please merge my version instead
as a workaround.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Link: https://patchwork.kernel.org/patch/9334097/
Link: https://patchwork.kernel.org/patch/9624585/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
---
---
 drivers/spi/Kconfig        |  1 +
 drivers/spi/spi-bcm-qspi.c | 23 ++++++++++++-----------
 2 files changed, 13 insertions(+), 11 deletions(-)

Comments

Kamal Dasu July 25, 2017, 9:39 p.m. UTC | #1
Arnd, Cyrille,

I am working on fixing spi-bcm-qspi.c as per Cyrill's suggestion as
mentioned here : https://patchwork.kernel.org/patch/9624585/.
 And remove the use of SPINOR_OP_READ* and there by remove need to
include spi-nor.h.

Thanks
Kamal

On Fri, Jul 21, 2017 at 6:00 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> The newly broadcom qspi driver in drivers/spi produces a build
> warning when CONFIG_MTD is disabled:
>
> include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
>
> I had suggested a workaround earlier, but Cyrille Pitchen explained
> that actually the broadcom qspi is broken here and needs to be
> fixed, see the lenghthy reply in patchwork.
>
> As nothing has happened on that driver, this tries to at least
> avoid the build failure, by marking the driver as broken unless
> CONFIG_MTD is enabled. Also, I add a WARN_ON_ONCE runtime
> that triggers when the spi-nor framework and the driver disagree
> about the command opcode, which was one of several issues that
> Cyrille pointed out.
>
> My patch does not attempt to fix any of the actual bugs though,
> it just tries to avoid the build error while highlighting the
> problems. Ideally, someone would step up to create a tested
> fix. If that doesn't happen, please merge my version instead
> as a workaround.
>
> Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
> Link: https://patchwork.kernel.org/patch/9334097/
> Link: https://patchwork.kernel.org/patch/9624585/
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
> ---
> ---
>  drivers/spi/Kconfig        |  1 +
>  drivers/spi/spi-bcm-qspi.c | 23 ++++++++++++-----------
>  2 files changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 9b31351fe429..c7a80f9d6dd0 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -164,6 +164,7 @@ config SPI_BCM_QSPI
>         tristate "Broadcom BSPI and MSPI controller support"
>         depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || \
>                         BMIPS_GENERIC || COMPILE_TEST
> +       depends on BROKEN || MTD
>         default ARCH_BCM_IPROC
>         help
>           Enables support for the Broadcom SPI flash and MSPI controller.
> diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
> index b19722ba908c..a388a3873552 100644
> --- a/drivers/spi/spi-bcm-qspi.c
> +++ b/drivers/spi/spi-bcm-qspi.c
> @@ -349,12 +349,13 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
>         bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
>  }
>
> -static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
> -                                      int addrlen, int hp)
> +static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
> +                                      struct spi_flash_read_message *msg,
> +                                      int width, int addrlen, int hp)
>  {
>         int bpc = 0, bpp = 0;
>         u8 command = SPINOR_OP_READ_FAST;
> -       int flex_mode = 1, rv = 0;
> +       int flex_mode = 1;
>         bool spans_4byte = false;
>
>         dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
> @@ -405,15 +406,14 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
>                 }
>                 break;
>         default:
> -               rv = -EINVAL;
> -               break;
> +               return -EINVAL;
>         }
>
> -       if (rv == 0)
> -               bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
> -                                             flex_mode);
> +       WARN_ON_ONCE(command != msg->read_opcode);
>
> -       return rv;
> +       bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
> +                                             flex_mode);
> +       return 0;
>  }
>
>  static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
> @@ -461,6 +461,7 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
>  }
>
>  static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
> +                                 struct spi_flash_read_message *msg,
>                                   int width, int addrlen, int hp)
>  {
>         int error = 0;
> @@ -491,7 +492,7 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
>         }
>
>         if (qspi->xfer_mode.flex_mode)
> -               error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
> +               error = bcm_qspi_bspi_set_flex_mode(qspi, msg, width, addrlen, hp);
>
>         if (error) {
>                 dev_warn(&qspi->pdev->dev,
> @@ -1012,7 +1013,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
>
>         io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
>         addrlen = msg->addr_width;
> -       ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
> +       ret = bcm_qspi_bspi_set_mode(qspi, msg, io_width, addrlen, -1);
>
>         if (!ret)
>                 ret = bcm_qspi_bspi_flash_read(spi, msg);
> --
> 2.9.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnd Bergmann July 26, 2017, 7:03 a.m. UTC | #2
On Tue, Jul 25, 2017 at 11:39 PM, Kamal Dasu <kdasu.kdev@gmail.com> wrote:
> Arnd, Cyrille,
>
> I am working on fixing spi-bcm-qspi.c as per Cyrill's suggestion as
> mentioned here : https://patchwork.kernel.org/patch/9624585/.
>  And remove the use of SPINOR_OP_READ* and there by remove need to
> include spi-nor.h.

Ok, thanks a lot!

Do you think your fix will be applicable to stable backports, or should we
add a simple dependency first for the stable kernels and remove that
dependency again with the proper fix?

       Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mark Brown July 26, 2017, 4:24 p.m. UTC | #3
On Tue, Jul 25, 2017 at 05:39:57PM -0400, Kamal Dasu wrote:
> Arnd, Cyrille,
> 
> I am working on fixing spi-bcm-qspi.c as per Cyrill's suggestion as
> mentioned here : https://patchwork.kernel.org/patch/9624585/.
>  And remove the use of SPINOR_OP_READ* and there by remove need to
> include spi-nor.h.

That's great - any ETA?  I'm tempted to apply Arnd's patch for now to
help anyone who runs into problems with it, your fix could then revert
it when you've got a proper fix.

Please don't top post, reply in line with needed context.  This allows
readers to readily follow the flow of conversation and understand what
you are talking about and also helps ensure that everything in the
discussion is being addressed.
Kamal Dasu July 26, 2017, 7:43 p.m. UTC | #4
On Wed, Jul 26, 2017 at 3:03 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tue, Jul 25, 2017 at 11:39 PM, Kamal Dasu <kdasu.kdev@gmail.com> wrote:
>> Arnd, Cyrille,
>>
>> I am working on fixing spi-bcm-qspi.c as per Cyrill's suggestion as
>> mentioned here : https://patchwork.kernel.org/patch/9624585/.
>>  And remove the use of SPINOR_OP_READ* and there by remove need to
>> include spi-nor.h.
>
> Ok, thanks a lot!
>
> Do you think your fix will be applicable to stable backports, or should we
> add a simple dependency first for the stable kernels and remove that
> dependency again with the proper fix?
>

The  fix would be applicable to stable backport, we don't need to add
a dependency.

>        Arnd

Kamal
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9b31351fe429..c7a80f9d6dd0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -164,6 +164,7 @@  config SPI_BCM_QSPI
 	tristate "Broadcom BSPI and MSPI controller support"
 	depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || \
 			BMIPS_GENERIC || COMPILE_TEST
+	depends on BROKEN || MTD
 	default ARCH_BCM_IPROC
 	help
 	  Enables support for the Broadcom SPI flash and MSPI controller.
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index b19722ba908c..a388a3873552 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -349,12 +349,13 @@  static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
 	bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
 }
 
-static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
-				       int addrlen, int hp)
+static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
+				       struct spi_flash_read_message *msg,
+				       int width, int addrlen, int hp)
 {
 	int bpc = 0, bpp = 0;
 	u8 command = SPINOR_OP_READ_FAST;
-	int flex_mode = 1, rv = 0;
+	int flex_mode = 1;
 	bool spans_4byte = false;
 
 	dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
@@ -405,15 +406,14 @@  static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
 		}
 		break;
 	default:
-		rv = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
-	if (rv == 0)
-		bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
-					      flex_mode);
+	WARN_ON_ONCE(command != msg->read_opcode);
 
-	return rv;
+	bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
+					      flex_mode);
+	return 0;
 }
 
 static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
@@ -461,6 +461,7 @@  static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
 }
 
 static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
+				  struct spi_flash_read_message *msg,
 				  int width, int addrlen, int hp)
 {
 	int error = 0;
@@ -491,7 +492,7 @@  static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
 	}
 
 	if (qspi->xfer_mode.flex_mode)
-		error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
+		error = bcm_qspi_bspi_set_flex_mode(qspi, msg, width, addrlen, hp);
 
 	if (error) {
 		dev_warn(&qspi->pdev->dev,
@@ -1012,7 +1013,7 @@  static int bcm_qspi_flash_read(struct spi_device *spi,
 
 	io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
 	addrlen = msg->addr_width;
-	ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
+	ret = bcm_qspi_bspi_set_mode(qspi, msg, io_width, addrlen, -1);
 
 	if (!ret)
 		ret = bcm_qspi_bspi_flash_read(spi, msg);