diff mbox series

[14/15] spi: img-spfi: Finish every transfer cleanly

Message ID 20180722212010.3979-15-afaerber@suse.de (mailing list archive)
State New, archived
Headers show
Series MIPS: pistachio: Creator Ci40 aka Marduk SPI-UART | expand

Commit Message

Andreas Färber July 22, 2018, 9:20 p.m. UTC
From: Ionela Voinescu <ionela.voinescu@imgtec.com>

Before this change, the interrupt status bit that signaled
the end of a transfer was cleared in the wait_all_done
function. That functionality triggered issues for DMA
duplex transactions where the wait function was called
twice, in both the TX and RX callbacks.

In order to fix the issue, clear all interrupt data bits
at the end of a PIO transfer or at the end of both TX and RX
duplex transfers, if the transfer is not a pending transfer
(command waiting for data). After that, the status register
is checked for new incoming data or new data requests to be
signaled. If SPFI finished cleanly, no new interrupt data
bits should be set.

Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 drivers/spi/spi-img-spfi.c | 49 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 14 deletions(-)

Comments

Mark Brown July 30, 2018, 3:35 p.m. UTC | #1
On Sun, Jul 22, 2018 at 11:20:09PM +0200, Andreas Färber wrote:
> From: Ionela Voinescu <ionela.voinescu@imgtec.com>
> 
> Before this change, the interrupt status bit that signaled
> the end of a transfer was cleared in the wait_all_done
> function. That functionality triggered issues for DMA
> duplex transactions where the wait function was called
> twice, in both the TX and RX callbacks.

Again, is this not a fix?
diff mbox series

Patch

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 8ad6c75d0af5..a1244234daa5 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -83,6 +83,14 @@ 
 #define SPFI_INTERRUPT_SDE			BIT(1)
 #define SPFI_INTERRUPT_SDTRIG			BIT(0)
 
+#define SPFI_INTERRUPT_DATA_BITS		(SPFI_INTERRUPT_SDHF |\
+						SPFI_INTERRUPT_SDFUL |\
+						SPFI_INTERRUPT_GDEX32BIT |\
+						SPFI_INTERRUPT_GDHF |\
+						SPFI_INTERRUPT_GDFUL |\
+						SPFI_INTERRUPT_ALLDONETRIG |\
+						SPFI_INTERRUPT_GDEX8BIT)
+
 /*
  * There are four parallel FIFOs of 16 bytes each.  The word buffer
  * (*_32BIT_VALID_DATA) accesses all four FIFOs at once, resulting in an
@@ -144,6 +152,23 @@  static inline void spfi_reset(struct img_spfi *spfi)
 	spfi_writel(spfi, 0, SPFI_CONTROL);
 }
 
+static inline void spfi_finish(struct img_spfi *spfi)
+{
+	if (!(spfi->complete))
+		return;
+
+	/* Clear data bits as all transfers(TX and RX) have finished */
+	spfi_writel(spfi, SPFI_INTERRUPT_DATA_BITS, SPFI_INTERRUPT_CLEAR);
+	if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & SPFI_INTERRUPT_DATA_BITS) {
+		dev_err(spfi->dev, "SPFI did not finish transfer cleanly.\n");
+		spfi_reset(spfi);
+	}
+	/* Disable SPFI for it not to interfere with pending transactions */
+	spfi_writel(spfi,
+		    spfi_readl(spfi, SPFI_CONTROL) & ~SPFI_CONTROL_SPFI_EN,
+		    SPFI_CONTROL);
+}
+
 static int spfi_wait_all_done(struct img_spfi *spfi)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(50);
@@ -152,19 +177,9 @@  static int spfi_wait_all_done(struct img_spfi *spfi)
 		return 0;
 
 	while (time_before(jiffies, timeout)) {
-		u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS);
-
-		if (status & SPFI_INTERRUPT_ALLDONETRIG) {
-			spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG,
-				    SPFI_INTERRUPT_CLEAR);
-			/*
-			 * Disable SPFI for it not to interfere with
-			 * pending transactions
-			 */
-			spfi_writel(spfi, spfi_readl(spfi, SPFI_CONTROL)
-			& ~SPFI_CONTROL_SPFI_EN, SPFI_CONTROL);
+		if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) &
+		    SPFI_INTERRUPT_ALLDONETRIG)
 			return 0;
-		}
 		cpu_relax();
 	}
 
@@ -296,6 +311,8 @@  static int img_spfi_start_pio(struct spi_master *master,
 	}
 
 	ret = spfi_wait_all_done(spfi);
+	spfi_finish(spfi);
+
 	if (ret < 0)
 		return ret;
 
@@ -311,8 +328,10 @@  static void img_spfi_dma_rx_cb(void *data)
 
 	spin_lock_irqsave(&spfi->lock, flags);
 	spfi->rx_dma_busy = false;
-	if (!spfi->tx_dma_busy)
+	if (!spfi->tx_dma_busy) {
+		spfi_finish(spfi);
 		spi_finalize_current_transfer(spfi->master);
+	}
 	spin_unlock_irqrestore(&spfi->lock, flags);
 }
 
@@ -325,8 +344,10 @@  static void img_spfi_dma_tx_cb(void *data)
 
 	spin_lock_irqsave(&spfi->lock, flags);
 	spfi->tx_dma_busy = false;
-	if (!spfi->rx_dma_busy)
+	if (!spfi->rx_dma_busy) {
+		spfi_finish(spfi);
 		spi_finalize_current_transfer(spfi->master);
+	}
 	spin_unlock_irqrestore(&spfi->lock, flags);
 }