Applied "spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32" to the spi tree

Commit Message

Mark Brown July 24, 2018, 4:05 p.m. UTC

The patch

   spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 2801b2f5fad3d1e9ea0ac8484584051071065645 Mon Sep 17 00:00:00 2001
From: Maxime Chevallier <[e-mail]>
Date: Tue, 17 Jul 2018 16:31:51 +0200
Subject: [PATCH] spi: imx: Use dynamic bursts only when bits_per_word is 8, 16
 or 32

The dynamic bursts mode allows to group together multiple words into a
single burst. To do so, it's necessary that words can be packed into the
32-bits FIFO entries, so we can't allow using this mode with bit_per_words
different to 8, 16 or 32.

This prevents shitfing out extra clock ticks for transfers with
bit_per_word values not aligned on 8 bits.

With that , we are sure that only the correct number of bits is
shifted out at each transfer, so we don't need to mask out the remaining
parts of the words.

Signed-off-by: Maxime Chevallier <[e-mail]>
Signed-off-by: Mark Brown <[e-mail]>
---
 drivers/spi/spi-imx.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

Patch

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d75153c995af..ecafbda5ec94 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -95,7 +95,6 @@  struct spi_imx_data {
 	const void *tx_buf;
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 	unsigned int dynamic_burst, read_u32;
-	unsigned int word_mask;
 
 	/* Slave mode */
 	bool slave_mode;
@@ -291,7 +290,6 @@  static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx)
 		else if (bytes_per_word == 2)
 			val = (val << 16) | (val >> 16);
 #endif
-		val &= spi_imx->word_mask;
 		*(u32 *)spi_imx->rx_buf = val;
 		spi_imx->rx_buf += sizeof(u32);
 	}
@@ -322,7 +320,6 @@  static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx)
 
 	if (spi_imx->tx_buf) {
 		val = *(u32 *)spi_imx->tx_buf;
-		val &= spi_imx->word_mask;
 		spi_imx->tx_buf += sizeof(u32);
 	}
 
@@ -1102,25 +1099,23 @@  static int spi_imx_setupxfer(struct spi_device *spi,
 	spi_imx->bits_per_word = t->bits_per_word;
 	spi_imx->speed_hz  = t->speed_hz;
 
-	/* Initialize the functions for transfer */
-	if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode) {
-		u32 mask;
+	/*
+	 * Initialize the functions for transfer. To transfer non byte-aligned
+	 * words, we have to use multiple word-size bursts, we can't use
+	 * dynamic_burst in that case.
+	 */
+	if (spi_imx->devtype_data->dynamic_burst && !spi_imx->slave_mode &&
+	    (spi_imx->bits_per_word == 8 ||
+	    spi_imx->bits_per_word == 16 ||
+	    spi_imx->bits_per_word == 32)) {
 
 		spi_imx->read_u32  = 1;
 
-		mask = (1 << spi_imx->bits_per_word) - 1;
 		spi_imx->rx = spi_imx_buf_rx_swap;
 		spi_imx->tx = spi_imx_buf_tx_swap;
 		spi_imx->dynamic_burst = 1;
 		spi_imx->remainder = t->len;
 
-		if (spi_imx->bits_per_word <= 8)
-			spi_imx->word_mask = mask << 24 | mask << 16
-					     | mask << 8 | mask;
-		else if (spi_imx->bits_per_word <= 16)
-			spi_imx->word_mask = mask << 16 | mask;
-		else
-			spi_imx->word_mask = mask;
 	} else {
 		if (spi_imx->bits_per_word <= 8) {
 			spi_imx->rx = spi_imx_buf_rx_u8;