[RESEND,v11,3/6] mfd: at91-usart: added mfd driver for usart

Commit Message

Radu Pirea Aug. 31, 2018, 1:41 p.m. UTC

This mfd driver is just a wrapper over atmel_serial driver and
spi-at91-usart driver. Selection of one of the drivers is based on a
property from device tree. If the property is not specified, the default
driver is atmel_serial.

Signed-off-by: Radu Pirea <[e-mail]>
Reviewed-by: Andy Shevchenko <[e-mail]>
Acked-by: Rob Herring <[e-mail]>
Acked-for-MFD-by: Lee Jones <[e-mail]>
Acked-by: Nicolas Ferre <[e-mail]>
---
 drivers/mfd/Kconfig      |  9 +++++
 drivers/mfd/Makefile     |  1 +
 drivers/mfd/at91-usart.c | 71 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 drivers/mfd/at91-usart.c

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 11841f4b7b2b..0b79c5d04cc9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -99,6 +99,15 @@  config MFD_AAT2870_CORE
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_AT91_USART
+	tristate "AT91 USART Driver"
+	select MFD_CORE
+	help
+	  Select this to get support for AT91 USART IP. This is a wrapper
+	  over at91-usart-serial driver and usart-spi-driver. Only one function
+	  can be used at a time. The choice is done at boot time by the probe
+	  function of this MFD driver according to a device tree property.
+
 config MFD_ATMEL_FLEXCOM
 	tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5856a9489cbd..12980a4ad460 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -196,6 +196,7 @@  obj-$(CONFIG_MFD_SPMI_PMIC)	+= qcom-spmi-pmic.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
+obj-$(CONFIG_MFD_AT91_USART)	+= at91-usart.o
 obj-$(CONFIG_MFD_ATMEL_FLEXCOM)	+= atmel-flexcom.o
 obj-$(CONFIG_MFD_ATMEL_HLCDC)	+= atmel-hlcdc.o
 obj-$(CONFIG_MFD_ATMEL_SMC)	+= atmel-smc.o
diff --git a/drivers/mfd/at91-usart.c b/drivers/mfd/at91-usart.c
new file mode 100644
index 000000000000..a4b9929c156f
--- /dev/null
+++ b/drivers/mfd/at91-usart.c
@@ -0,0 +1,71 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for AT91 USART
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <[e-mail]>
+ *
+ */
+
+#include <dt-bindings/mfd/at91-usart.h>
+
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/property.h>
+
+static struct mfd_cell at91_usart_spi_subdev = {
+		.name = "at91_usart_spi",
+		.of_compatible = "microchip,at91sam9g45-usart-spi",
+	};
+
+static struct mfd_cell at91_usart_serial_subdev = {
+		.name = "atmel_usart_serial",
+		.of_compatible = "atmel,at91rm9200-usart-serial",
+	};
+
+static int at91_usart_mode_probe(struct platform_device *pdev)
+{
+	struct mfd_cell cell;
+	u32 opmode = AT91_USART_MODE_SERIAL;
+
+	device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode);
+
+	switch (opmode) {
+	case AT91_USART_MODE_SPI:
+		cell = at91_usart_spi_subdev;
+		break;
+	case AT91_USART_MODE_SERIAL:
+		cell = at91_usart_serial_subdev;
+		break;
+	default:
+		dev_err(&pdev->dev, "atmel,usart-mode has an invalid value %u\n",
+			opmode);
+		return -EINVAL;
+	}
+
+	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,
+			      NULL, 0, NULL);
+}
+
+static const struct of_device_id at91_usart_mode_of_match[] = {
+	{ .compatible = "atmel,at91rm9200-usart" },
+	{ .compatible = "atmel,at91sam9260-usart" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_usart_mode_of_match);
+
+static struct platform_driver at91_usart_mfd = {
+	.probe	= at91_usart_mode_probe,
+	.driver	= {
+		.name		= "at91_usart_mode",
+		.of_match_table	= at91_usart_mode_of_match,
+	},
+};
+
+module_platform_driver(at91_usart_mfd);
+
+MODULE_AUTHOR("Radu Pirea <[e-mail]>");
+MODULE_DESCRIPTION("AT91 USART MFD driver");
+MODULE_LICENSE("GPL v2");