diff mbox series

[RFC,02/18] spi: Prepare things for octo mode support

Message ID 20181012084825.23697-3-boris.brezillon@bootlin.com (mailing list archive)
State New, archived
Headers show
Series mtd: spi-nor: Proposal for 8-8-8 mode support | expand

Commit Message

Boris Brezillon Oct. 12, 2018, 8:48 a.m. UTC 
Add the necessary flags and checks in spi.h, spi.c and spi-mem.c to
support octo mode.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
 drivers/spi/spi-mem.c   |  7 +++++++
 drivers/spi/spi.c       | 12 ++++++++++--
 include/linux/spi/spi.h |  2 ++
 3 files changed, 19 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 4a84b07a3186..2379efcaf1c6 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -121,6 +121,13 @@  static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
 
 		break;
 
+	case 8:
+		if ((tx && (mode & SPI_TX_OCTO)) ||
+		    (!tx && (mode & SPI_RX_OCTO)))
+			return 0;
+
+		break;
+
 	default:
 		break;
 	}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 9da0bc5a036c..bc6fc74ff4ec 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1573,6 +1573,9 @@  static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		case 4:
 			spi->mode |= SPI_TX_QUAD;
 			break;
+		case 8:
+			spi->mode |= SPI_TX_OCTO;
+			break;
 		default:
 			dev_warn(&ctlr->dev,
 				"spi-tx-bus-width %d not supported\n",
@@ -1591,6 +1594,9 @@  static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		case 4:
 			spi->mode |= SPI_RX_QUAD;
 			break;
+		case 8:
+			spi->mode |= SPI_RX_OCTO;
+			break;
 		default:
 			dev_warn(&ctlr->dev,
 				"spi-rx-bus-width %d not supported\n",
@@ -2779,14 +2785,16 @@  int spi_setup(struct spi_device *spi)
 	/* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
 	 */
 	if ((spi->mode & SPI_3WIRE) && (spi->mode &
-		(SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
+		(SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTO | SPI_RX_DUAL |
+		 SPI_RX_QUAD | SPI_RX_OCTO)))
 		return -EINVAL;
 	/* help drivers fail *cleanly* when they need options
 	 * that aren't supported with their current controller
 	 */
 	bad_bits = spi->mode & ~spi->controller->mode_bits;
 	ugly_bits = bad_bits &
-		    (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
+		    (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTO | SPI_RX_DUAL |
+		     SPI_RX_QUAD | SPI_RX_OCTO);
 	if (ugly_bits) {
 		dev_warn(&spi->dev,
 			 "setup: ignoring unsupported mode bits %x\n",
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a64235e05321..cea4e49a9e53 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -163,6 +163,8 @@  struct spi_device {
 #define	SPI_TX_QUAD	0x200			/* transmit with 4 wires */
 #define	SPI_RX_DUAL	0x400			/* receive with 2 wires */
 #define	SPI_RX_QUAD	0x800			/* receive with 4 wires */
+#define	SPI_TX_OCTO	0x1000			/* transmit with 8 wires */
+#define	SPI_RX_OCTO	0x2000			/* receive with 8 wires */
 	int			irq;
 	void			*controller_state;
 	void			*controller_data;