diff mbox series

[v3,3/5] spi: imx: style fixes

Message ID 20181130064709.6998-4-u.kleine-koenig@pengutronix.de (mailing list archive)
State Accepted
Headers show
Series spi: imx: Fix polarity switching for mx51-ecspi | expand

Commit Message

Uwe Kleine-König Nov. 30, 2018, 6:47 a.m. UTC 
This change fixes some random style issues that I noticed while debugging
the driver: Remove some double spaces, use tabs for indention instead
of spaces if possible, fix comment style.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/spi-imx.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d3a1e7104556..d954b6d958c2 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -39,8 +39,8 @@ 
 #define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
 #define MXC_INT_RDR	BIT(4) /* Receive date threshold interrupt */
 
-/* The maximum  bytes that a sdma BD can transfer.*/
-#define MAX_SDMA_BD_BYTES  (1 << 15)
+/* The maximum bytes that a sdma BD can transfer. */
+#define MAX_SDMA_BD_BYTES (1 << 15)
 #define MX51_ECSPI_CTRL_MAX_BURST	512
 /* The maximum bytes that IMX53_ECSPI can transfer in slave mode.*/
 #define MX53_MAX_TRANSFER_BYTES		512
@@ -257,7 +257,7 @@  static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_INT_RREN		(1 <<  3)
 #define MX51_ECSPI_INT_RDREN		(1 <<  4)
 
-#define MX51_ECSPI_DMA      0x14
+#define MX51_ECSPI_DMA		0x14
 #define MX51_ECSPI_DMA_TX_WML(wml)	((wml) & 0x3f)
 #define MX51_ECSPI_DMA_RX_WML(wml)	(((wml) & 0x3f) << 16)
 #define MX51_ECSPI_DMA_RXT_WML(wml)	(((wml) & 0x3f) << 24)
@@ -726,8 +726,10 @@  static int mx31_config(struct spi_device *spi)
 	writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
 
 	if (spi_imx->usedma) {
-		/* configure DMA requests when RXFIFO is half full and
-		   when TXFIFO is half empty */
+		/*
+		 * configure DMA requests when RXFIFO is half full and
+		 * when TXFIFO is half empty
+		 */
 		writel(MX31_DMAREG_RH_DEN | MX31_DMAREG_TH_DEN,
 			spi_imx->base + MX31_CSPI_DMAREG);
 	}
@@ -1093,7 +1095,7 @@  static void spi_imx_push(struct spi_imx_data *spi_imx)
 		if (!spi_imx->count)
 			break;
 		if (spi_imx->dynamic_burst &&
-		    spi_imx->txfifo >=  DIV_ROUND_UP(spi_imx->remainder,
+		    spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
 						     fifo_words))
 			break;
 		spi_imx->tx(spi_imx);
@@ -1187,7 +1189,7 @@  static int spi_imx_setupxfer(struct spi_device *spi,
 		return 0;
 
 	spi_imx->bits_per_word = t->bits_per_word;
-	spi_imx->speed_hz  = t->speed_hz;
+	spi_imx->speed_hz = t->speed_hz;
 
 	/*
 	 * Initialize the functions for transfer. To transfer non byte-aligned