diff mbox series

[v1,1/2] dt-bindings: spi: Add support for cadence-qspi IP Intel LGM SoC

Message ID 20190916073843.39618-2-vadivel.muruganx.ramuthevar@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC | expand

Commit Message

Ramuthevar,Vadivel MuruganX Sept. 16, 2019, 7:38 a.m. UTC
From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

On Intel Lightening Mountain(LGM) SoCs QSPI controller support
to QSPI-NAND flash. This introduces to device tree binding
documentation for Cadence-QSPI controller and spi-nand flash.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 .../devicetree/bindings/spi/cadence,qspi-nand.yaml | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml

Comments

Rob Herring Sept. 30, 2019, 10:36 p.m. UTC | #1
On Mon, Sep 16, 2019 at 03:38:42PM +0800, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> 
> On Intel Lightening Mountain(LGM) SoCs QSPI controller support
> to QSPI-NAND flash. This introduces to device tree binding
> documentation for Cadence-QSPI controller and spi-nand flash.
> 
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
>  .../devicetree/bindings/spi/cadence,qspi-nand.yaml | 84 ++++++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml b/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
> new file mode 100644
> index 000000000000..9aae4c1459cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/spi/cadence,qspi-nand.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence QSPI Flash Controller on Intel's SoC
> +
> +maintainers:
> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +description: |
> +  The Cadence QSPI is a controller optimized for communication with SPI
> +  FLASH memories, without DMA support on Intel's SoC.
> +
> +properties:
> +  compatible:
> +    const: cadence,lgm-qspi

Vendor here should be 'intel'. Perhaps the binding should be shared too 
like the driver.

Plus the vendor prefix for Cadence is cdns.

> +
> +  reg:
> +    maxItems: 1
> +
> +  fifo-depth:
> +    maxItems: 1
> +
This is vendor specific, so needs a vendor prefix, type, and 
description.

> +  fifo-width:
> +    maxItems: 1

Same

> +
> +  qspi-phyaddr:
> +    maxItems: 1

Same

> +
> +  qspi-phymask:
> +    maxItems: 1

Same

> +
> +  clocks:
> +    maxItems: 2

Need to define what each clock is when there is more than 1.

> +
> +  clocks-names:
> +    maxItems: 2

Need to define the strings.

> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - fifo-depth
> +  - fifo-width
> +  - qspi-phyaddr
> +  - qspi-phymask
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +
> +examples:
> +  - |
> +    qspi@ec000000 {

spi@...

> +          compatible = "cadence,qspi-nand";
> +          reg = <0xec000000 0x100>;
> +          fifo-depth = <128>;
> +          fifo-width = <4>;
> +          qspi-phyaddr = <0xf4000000>;
> +          qspi-phymask = <0xffffffff>;
> +          clocks = <&cgu0 LGM_CLK_QSPI>, <&cgu0 LGM_GCLK_QSPI>;
> +          clock-names = "freq", "qspi";
> +          resets = <&rcu0 0x10 1>;
> +          reset-names = "qspi";
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          flash: flash@1 {
> +              compatible = "spi-nand";
> +              reg = <1>;
> +              spi-max-frequency = <10000000>;
> +          };
> +    };
> +
> -- 
> 2.11.0
>
Ramuthevar,Vadivel MuruganX Oct. 1, 2019, 1:13 a.m. UTC | #2
Hi Rob,

    Thank you for the review comments.

On 1/10/2019 6:36 AM, Rob Herring wrote:
> On Mon, Sep 16, 2019 at 03:38:42PM +0800, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> On Intel Lightening Mountain(LGM) SoCs QSPI controller support
>> to QSPI-NAND flash. This introduces to device tree binding
>> documentation for Cadence-QSPI controller and spi-nand flash.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> ---
>>   .../devicetree/bindings/spi/cadence,qspi-nand.yaml | 84 ++++++++++++++++++++++
>>   1 file changed, 84 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml b/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
>> new file mode 100644
>> index 000000000000..9aae4c1459cc
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
>> @@ -0,0 +1,84 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/spi/cadence,qspi-nand.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Cadence QSPI Flash Controller on Intel's SoC
>> +
>> +maintainers:
>> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> +
>> +allOf:
>> +  - $ref: "spi-controller.yaml#"
>> +
>> +description: |
>> +  The Cadence QSPI is a controller optimized for communication with SPI
>> +  FLASH memories, without DMA support on Intel's SoC.
>> +
>> +properties:
>> +  compatible:
>> +    const: cadence,lgm-qspi
> Vendor here should be 'intel'. Perhaps the binding should be shared too
> like the driver.
>
> Plus the vendor prefix for Cadence is cdns.
Agreed!, will update.
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  fifo-depth:
>> +    maxItems: 1
>> +
> This is vendor specific, so needs a vendor prefix, type, and
> description.
agreed!
>> +  fifo-width:
>> +    maxItems: 1
> Same
>
>> +
>> +  qspi-phyaddr:
>> +    maxItems: 1
> Same
>
>> +
>> +  qspi-phymask:
>> +    maxItems: 1
> Same
will update all the above.
>> +
>> +  clocks:
>> +    maxItems: 2
> Need to define what each clock is when there is more than 1.
Sure, will update.
>> +
>> +  clocks-names:
>> +    maxItems: 2
> Need to define the strings.
Noted, will update.
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  reset-names:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - fifo-depth
>> +  - fifo-width
>> +  - qspi-phyaddr
>> +  - qspi-phymask
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - reset-names
>> +
>> +examples:
>> +  - |
>> +    qspi@ec000000 {
> spi@...

Controller is qspi , so that have updated.

With Best Regards
Vadivel Murugan R
>> +          compatible = "cadence,qspi-nand";
>> +          reg = <0xec000000 0x100>;
>> +          fifo-depth = <128>;
>> +          fifo-width = <4>;
>> +          qspi-phyaddr = <0xf4000000>;
>> +          qspi-phymask = <0xffffffff>;
>> +          clocks = <&cgu0 LGM_CLK_QSPI>, <&cgu0 LGM_GCLK_QSPI>;
>> +          clock-names = "freq", "qspi";
>> +          resets = <&rcu0 0x10 1>;
>> +          reset-names = "qspi";
>> +          #address-cells = <1>;
>> +          #size-cells = <0>;
>> +
>> +          flash: flash@1 {
>> +              compatible = "spi-nand";
>> +              reg = <1>;
>> +              spi-max-frequency = <10000000>;
>> +          };
>> +    };
>> +
>> -- 
>> 2.11.0
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml b/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
new file mode 100644
index 000000000000..9aae4c1459cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cadence,qspi-nand.yaml
@@ -0,0 +1,84 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/cadence,qspi-nand.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence QSPI Flash Controller on Intel's SoC
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+description: |
+  The Cadence QSPI is a controller optimized for communication with SPI
+  FLASH memories, without DMA support on Intel's SoC.
+
+properties:
+  compatible:
+    const: cadence,lgm-qspi
+
+  reg:
+    maxItems: 1
+
+  fifo-depth:
+    maxItems: 1
+
+  fifo-width:
+    maxItems: 1
+
+  qspi-phyaddr:
+    maxItems: 1
+
+  qspi-phymask:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clocks-names:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - fifo-depth
+  - fifo-width
+  - qspi-phyaddr
+  - qspi-phymask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    qspi@ec000000 {
+          compatible = "cadence,qspi-nand";
+          reg = <0xec000000 0x100>;
+          fifo-depth = <128>;
+          fifo-width = <4>;
+          qspi-phyaddr = <0xf4000000>;
+          qspi-phymask = <0xffffffff>;
+          clocks = <&cgu0 LGM_CLK_QSPI>, <&cgu0 LGM_GCLK_QSPI>;
+          clock-names = "freq", "qspi";
+          resets = <&rcu0 0x10 1>;
+          reset-names = "qspi";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          flash: flash@1 {
+              compatible = "spi-nand";
+              reg = <1>;
+              spi-max-frequency = <10000000>;
+          };
+    };
+