diff mbox series

[3/3] spi: spi-ti-qspi: optimize byte-transfers

Message ID 20191211193954.747745-4-jean.pihet@newoldbits.com (mailing list archive)
State Superseded
Headers show
Series spi: spi-ti-qspi: Support large NOR SPI flash | expand

Commit Message

Jean Pihet Dec. 11, 2019, 7:39 p.m. UTC 
Optimize the 8-bit based transfers, as used by the SPI flash
devices, by reading the data registers by 32 and 128 bits when
possible and copy the contents to the receive buffer.

The speed improvement is 4.9x using quad read.

Signed-off-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Cc: Conrad Ratschan <conrad.ratschan@rockwellcollins.com>
Cc: Arnout Vandecappelle <arnout.vandecappelle@essensium.com>
---
 drivers/spi/spi-ti-qspi.c | 54 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index aee4709d105e..d37306cafd8b 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -313,6 +313,8 @@  static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
 {
 	int wlen;
 	unsigned int cmd;
+	u32 rx;
+	u8 rxlen, rx_wlen;
 	u8 *rxbuf;
 
 	rxbuf = t->rx_buf;
@@ -335,14 +337,60 @@  static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
 		if (qspi_is_busy(qspi))
 			return -EBUSY;
 
+		switch (wlen) {
+		case 1:
+			/*
+			 * Optimize the 8-bit words transfers, as used by
+			 * the SPI flash devices.
+			 */
+			if (count >= QSPI_WLEN_MAX_BYTES) {
+				rxlen = QSPI_WLEN_MAX_BYTES;
+			} else {
+				rxlen = min(count, 4);
+			}
+			rx_wlen = rxlen << 3;
+			cmd &= ~QSPI_WLEN_MASK;
+			cmd |= QSPI_WLEN(rx_wlen);
+			break;
+		default:
+			rxlen = wlen;
+			break;
+		}
+
 		ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
 		if (ti_qspi_poll_wc(qspi)) {
 			dev_err(qspi->dev, "read timed out\n");
 			return -ETIMEDOUT;
 		}
+
 		switch (wlen) {
 		case 1:
-			*rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG);
+			/*
+			 * Optimize the 8-bit words transfers, as used by
+			 * the SPI flash devices.
+			 */
+			if (count >= QSPI_WLEN_MAX_BYTES) {
+				u32 *rxp = (u32 *) rxbuf;
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG_3);
+				*rxp++ = be32_to_cpu(rx);
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG_2);
+				*rxp++ = be32_to_cpu(rx);
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG_1);
+				*rxp++ = be32_to_cpu(rx);
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG);
+				*rxp++ = be32_to_cpu(rx);
+			} else {
+				u8 *rxp = rxbuf;
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG);
+				if (rx_wlen >= 8)
+					*rxp++ = rx >> (rx_wlen - 8);
+				if (rx_wlen >= 16)
+					*rxp++ = rx >> (rx_wlen - 16);
+				if (rx_wlen >= 24)
+					*rxp++ = rx >> (rx_wlen - 24);
+				if (rx_wlen >= 32)
+					*rxp++ = rx;
+			}
 			break;
 		case 2:
 			*((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
@@ -351,8 +399,8 @@  static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
 			*((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
 			break;
 		}
-		rxbuf += wlen;
-		count -= wlen;
+		rxbuf += rxlen;
+		count -= rxlen;
 	}
 
 	return 0;