From patchwork Thu Jan 16 23:11:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 11337943 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6BAC9139A for ; Thu, 16 Jan 2020 23:12:09 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 53F962081E for ; Thu, 16 Jan 2020 23:12:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730992AbgAPXMI (ORCPT ); Thu, 16 Jan 2020 18:12:08 -0500 Received: from foss.arm.com ([217.140.110.172]:34046 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729336AbgAPXMI (ORCPT ); Thu, 16 Jan 2020 18:12:08 -0500 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id DAA4D11FB; Thu, 16 Jan 2020 15:12:07 -0800 (PST) Received: from localhost.localdomain (unknown [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 00CC33F68E; Thu, 16 Jan 2020 15:12:05 -0800 (PST) From: Andre Przywara To: Maxime Ripard , Chen-Yu Tsai Cc: linux-spi@vger.kernel.org, Mark Brown , Icenowy Zheng , Mark Rutland , Rob Herring , linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, devicetree@vger.kernel.org Subject: [PATCH v3 1/3] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes Date: Thu, 16 Jan 2020 23:11:46 +0000 Message-Id: <20200116231148.1490-2-andre.przywara@arm.com> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20200116231148.1490-1-andre.przywara@arm.com> References: <20200116231148.1490-1-andre.przywara@arm.com> Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The Allwinner H6 SoC contains two SPI controllers similar to the H3/A64, but with the added capability of 3-wire and 4-wire operation modes. For now the driver does not support those, but the SPI registers are fully backwards-compatible, just adding bits and registers which were formerly reserved. So we can use the existing driver in "legacy" SPI modes, for instance to access the SPI NOR flash soldered on the PineH64 board. We use an H6 specific compatible string in addition to the existing H3 string, so when the driver later gains QSPI support, it should work automatically without any DT changes. Tested by accessing the SPI flash on a Pine H64 board (SPI0), also connecting another SPI flash to the SPI1 header pins. Signed-off-by: Andre Przywara --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 55 ++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 3329283e38ab..41b58ffa8596 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -338,6 +338,31 @@ bias-pull-up; }; + /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC0", "PC2", "PC3"; + function = "spi0"; + }; + + /* pin shared with MMC2-CMD (eMMC) */ + /omit-if-no-ref/ + spi0_cs_pin: spi0-cs-pin { + pins = "PC5"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pins: spi1-pins { + pins = "PH4", "PH5", "PH6"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs_pin: spi1-cs-pin { + pins = "PH3"; + function = "spi1"; + }; + spdif_tx_pin: spdif-tx-pin { pins = "PH7"; function = "spdif"; @@ -504,6 +529,36 @@ #size-cells = <0>; }; + spi0: spi@5010000 { + compatible = "allwinner,sun50i-h6-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05010000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@5011000 { + compatible = "allwinner,sun50i-h6-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05011000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + emac: ethernet@5020000 { compatible = "allwinner,sun50i-h6-emac", "allwinner,sun50i-a64-emac";