diff mbox series

[RFC,v1,1/3] dt-bindings: spi: convert rockchip spi bindings to yaml

Message ID 20200118230848.15326-1-jbx6244@gmail.com (mailing list archive)
State Superseded
Headers show
Series [RFC,v1,1/3] dt-bindings: spi: convert rockchip spi bindings to yaml | expand

Commit Message

Johan Jonker Jan. 18, 2020, 11:08 p.m. UTC
Current dts files with 'spi' nodes are manually verified.
In order to automate this process spi-rockchip.txt
has to be converted to yaml. In the new setup
spi-rockchip.yaml will inherit properties from
spi-controller.yaml.

Add document to MAINTAINERS.

Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi
use an extra fallback string, so change this in the documentation.

Changed:
"rockchip,rk3188-spi", "rockchip,rk3066-spi"
"rockchip,rk3288-spi", "rockchip,rk3066-spi"
"rockchip,rk3368-spi", "rockchip,rk3066-spi"
"rockchip,rk3399-spi", "rockchip,rk3066-spi"

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 .../devicetree/bindings/spi/spi-rockchip.txt       |  58 -----------
 .../devicetree/bindings/spi/spi-rockchip.yaml      | 111 +++++++++++++++++++++
 MAINTAINERS                                        |   1 +
 3 files changed, 112 insertions(+), 58 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt
 create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml

Comments

Rob Herring (Arm) Jan. 22, 2020, 4:22 p.m. UTC | #1
On Sun, Jan 19, 2020 at 12:08:46AM +0100, Johan Jonker wrote:
> Current dts files with 'spi' nodes are manually verified.
> In order to automate this process spi-rockchip.txt
> has to be converted to yaml. In the new setup
> spi-rockchip.yaml will inherit properties from
> spi-controller.yaml.
> 
> Add document to MAINTAINERS.
> 
> Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi
> use an extra fallback string, so change this in the documentation.
> 
> Changed:
> "rockchip,rk3188-spi", "rockchip,rk3066-spi"
> "rockchip,rk3288-spi", "rockchip,rk3066-spi"
> "rockchip,rk3368-spi", "rockchip,rk3066-spi"
> "rockchip,rk3399-spi", "rockchip,rk3066-spi"
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>  .../devicetree/bindings/spi/spi-rockchip.txt       |  58 -----------
>  .../devicetree/bindings/spi/spi-rockchip.yaml      | 111 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  3 files changed, 112 insertions(+), 58 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> deleted file mode 100644
> index a0edac12d..000000000
> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Rockchip SPI Controller
> -
> -The Rockchip SPI controller is used to interface with various devices such as flash
> -and display controllers using the SPI communication interface.
> -
> -Required Properties:
> -
> -- compatible: should be one of the following.
> -    "rockchip,rv1108-spi" for rv1108 SoCs.
> -    "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
> -    "rockchip,rk3036-spi" for rk3036 SoCS.
> -    "rockchip,rk3066-spi" for rk3066 SoCs.
> -    "rockchip,rk3188-spi" for rk3188 SoCs.
> -    "rockchip,rk3228-spi" for rk3228 SoCS.
> -    "rockchip,rk3288-spi" for rk3288 SoCs.
> -    "rockchip,rk3368-spi" for rk3368 SoCs.
> -    "rockchip,rk3399-spi" for rk3399 SoCs.
> -- reg: physical base address of the controller and length of memory mapped
> -       region.
> -- interrupts: The interrupt number to the cpu. The interrupt specifier format
> -              depends on the interrupt controller.
> -- clocks: Must contain an entry for each entry in clock-names.
> -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
> -			   the peripheral clock.
> -- #address-cells: should be 1.
> -- #size-cells: should be 0.
> -
> -Optional Properties:
> -
> -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
> -		Documentation/devicetree/bindings/dma/dma.txt
> -- dma-names: DMA request names should include "tx" and "rx" if present.
> -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
> -		Rx data (may need to be fine tuned for high capacitance lines).
> -		No delay (0) by default.
> -- pinctrl-names: Names for the pin configuration(s); may be "default" or
> -		"sleep", where the "sleep" configuration may describe the state
> -		the pins should be in during system suspend. See also
> -		pinctrl/pinctrl-bindings.txt.
> -
> -
> -Example:
> -
> -	spi0: spi@ff110000 {
> -		compatible = "rockchip,rk3066-spi";
> -		reg = <0xff110000 0x1000>;
> -		dmas = <&pdma1 11>, <&pdma1 12>;
> -		dma-names = "tx", "rx";
> -		rx-sample-delay-ns = <10>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> -		clock-names = "spiclk", "apb_pclk";
> -		pinctrl-0 = <&spi1_pins>;
> -		pinctrl-1 = <&spi1_sleep>;
> -		pinctrl-names = "default", "sleep";
> -	};
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> new file mode 100644
> index 000000000..80c56c583
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SPI Controller
> +
> +description:
> +  The Rockchip SPI controller is used to interface with various devices such
> +  as flash and display controllers using the SPI communication interface.
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +# Everything else is described in the common file
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: rockchip,rk3036-spi #for rk3036 SoCS.
> +      - const: rockchip,rk3066-spi #for rk3066 SoCs.
> +      - const: rockchip,rk3228-spi #for rk3228 SoCS.
> +      - const: rockchip,rv1108-spi #for rv1108 SoCs.
> +      - items:
> +          - enum:
> +            - rockchip,px30-spi    #for px30 SoCs.
> +            - rockchip,rk3188-spi  #for rk3188 SoCs.
> +            - rockchip,rk3288-spi  #for rk3288 SoCs.
> +            - rockchip,rk3368-spi  #for rk3368 SoCs.
> +            - rockchip,rk3399-spi  #for rk3399 SoCs.
> +          - const: rockchip,rk3066-spi
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +    description:
> +      Must contain an entry for each entry in clock-names.

That's *every* clocks entry. Drop this.
> +
> +  clock-names:
> +    items:
> +      - const: spiclk
> +      - const: apb_pclk
> +    description:
> +      Shall be "spiclk" for the transfer-clock
> +      and "apb_pclk" for the peripheral clock.

Basically just repeating what the schema says. If you want more of a 
description of each clock, do what you've done for 'dmas' with 'clocks'.

> +
> +  dmas:
> +    items:
> +      - description: TX DMA Channel
> +      - description: RX DMA Channel
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +  rx-sample-delay-ns:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

Don't need to define the type for properties with standard unit 
suffixes.

> +    default: 0
> +    description:
> +      Nano seconds to delay after the SCLK edge before sampling Rx data
> +      (may need to be fine tuned for high capacitance lines).
> +      If not specified 0 will be used.
> +
> +  pinctrl-names:
> +    minItems: 1
> +    items:
> +      - const: default
> +      - const: sleep
> +    description:
> +      Names for the pin configuration(s); may be "default" or "sleep",
> +      where the "sleep" configuration may describe the state
> +      the pins should be in during system suspend.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3188-cru-common.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi0: spi@ff110000 {
> +      compatible = "rockchip,rk3066-spi";
> +      reg = <0xff110000 0x1000>;
> +      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> +      clock-names = "spiclk", "apb_pclk";
> +      dmas = <&pdma1 11>, <&pdma1 12>;
> +      dma-names = "tx", "rx";
> +      pinctrl-0 = <&spi1_pins>;
> +      pinctrl-1 = <&spi1_sleep>;
> +      pinctrl-names = "default", "sleep";
> +      rx-sample-delay-ns = <10>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d6ad01d71..096c324f9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2240,6 +2240,7 @@ L:	linux-rockchip@lists.infradead.org
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> +F:	Documentation/devicetree/bindings/spi/spi-rockchip.yaml
>  F:	arch/arm/boot/dts/rk3*
>  F:	arch/arm/boot/dts/rv1108*
>  F:	arch/arm/mach-rockchip/
> -- 
> 2.11.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
deleted file mode 100644
index a0edac12d..000000000
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ /dev/null
@@ -1,58 +0,0 @@ 
-* Rockchip SPI Controller
-
-The Rockchip SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required Properties:
-
-- compatible: should be one of the following.
-    "rockchip,rv1108-spi" for rv1108 SoCs.
-    "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
-    "rockchip,rk3036-spi" for rk3036 SoCS.
-    "rockchip,rk3066-spi" for rk3066 SoCs.
-    "rockchip,rk3188-spi" for rk3188 SoCs.
-    "rockchip,rk3228-spi" for rk3228 SoCS.
-    "rockchip,rk3288-spi" for rk3288 SoCs.
-    "rockchip,rk3368-spi" for rk3368 SoCs.
-    "rockchip,rk3399-spi" for rk3399 SoCs.
-- reg: physical base address of the controller and length of memory mapped
-       region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-              depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
-			   the peripheral clock.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Properties:
-
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-		Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
-		Rx data (may need to be fine tuned for high capacitance lines).
-		No delay (0) by default.
-- pinctrl-names: Names for the pin configuration(s); may be "default" or
-		"sleep", where the "sleep" configuration may describe the state
-		the pins should be in during system suspend. See also
-		pinctrl/pinctrl-bindings.txt.
-
-
-Example:
-
-	spi0: spi@ff110000 {
-		compatible = "rockchip,rk3066-spi";
-		reg = <0xff110000 0x1000>;
-		dmas = <&pdma1 11>, <&pdma1 12>;
-		dma-names = "tx", "rx";
-		rx-sample-delay-ns = <10>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
-		clock-names = "spiclk", "apb_pclk";
-		pinctrl-0 = <&spi1_pins>;
-		pinctrl-1 = <&spi1_sleep>;
-		pinctrl-names = "default", "sleep";
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
new file mode 100644
index 000000000..80c56c583
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -0,0 +1,111 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPI Controller
+
+description:
+  The Rockchip SPI controller is used to interface with various devices such
+  as flash and display controllers using the SPI communication interface.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3036-spi #for rk3036 SoCS.
+      - const: rockchip,rk3066-spi #for rk3066 SoCs.
+      - const: rockchip,rk3228-spi #for rk3228 SoCS.
+      - const: rockchip,rv1108-spi #for rv1108 SoCs.
+      - items:
+          - enum:
+            - rockchip,px30-spi    #for px30 SoCs.
+            - rockchip,rk3188-spi  #for rk3188 SoCs.
+            - rockchip,rk3288-spi  #for rk3288 SoCs.
+            - rockchip,rk3368-spi  #for rk3368 SoCs.
+            - rockchip,rk3399-spi  #for rk3399 SoCs.
+          - const: rockchip,rk3066-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+    description:
+      Must contain an entry for each entry in clock-names.
+
+  clock-names:
+    items:
+      - const: spiclk
+      - const: apb_pclk
+    description:
+      Shall be "spiclk" for the transfer-clock
+      and "apb_pclk" for the peripheral clock.
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rx-sample-delay-ns:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Nano seconds to delay after the SCLK edge before sampling Rx data
+      (may need to be fine tuned for high capacitance lines).
+      If not specified 0 will be used.
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+    description:
+      Names for the pin configuration(s); may be "default" or "sleep",
+      where the "sleep" configuration may describe the state
+      the pins should be in during system suspend.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0: spi@ff110000 {
+      compatible = "rockchip,rk3066-spi";
+      reg = <0xff110000 0x1000>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+      clock-names = "spiclk", "apb_pclk";
+      dmas = <&pdma1 11>, <&pdma1 12>;
+      dma-names = "tx", "rx";
+      pinctrl-0 = <&spi1_pins>;
+      pinctrl-1 = <&spi1_sleep>;
+      pinctrl-names = "default", "sleep";
+      rx-sample-delay-ns = <10>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index d6ad01d71..096c324f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2240,6 +2240,7 @@  L:	linux-rockchip@lists.infradead.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+F:	Documentation/devicetree/bindings/spi/spi-rockchip.yaml
 F:	arch/arm/boot/dts/rk3*
 F:	arch/arm/boot/dts/rv1108*
 F:	arch/arm/mach-rockchip/