diff mbox series

[v3,06/16] spi: dw: Parameterize the DMA Rx/Tx burst length

Message ID 20200521012206.14472-7-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State Superseded
Headers show
Series spi: dw: Add generic DW DMA controller support | expand

Commit Message

Serge Semin May 21, 2020, 1:21 a.m. UTC
It isn't good to have numeric literals in the code especially if there
are multiple of them and they are related. Let's replace the Tx and Rx
burst level literals with the corresponding constants.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org

---

Changelog v3:
- Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold
  setting.
---
 drivers/spi/spi-dw-mid.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Comments

Andy Shevchenko May 21, 2020, 10:23 a.m. UTC | #1
On Thu, May 21, 2020 at 04:21:56AM +0300, Serge Semin wrote:
> It isn't good to have numeric literals in the code especially if there
> are multiple of them and they are related. Let's replace the Tx and Rx
> burst level literals with the corresponding constants.

Thanks!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> 
> Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-mips@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> 
> ---
> 
> Changelog v3:
> - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold
>   setting.
> ---
>  drivers/spi/spi-dw-mid.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
> index 7bba774885cd..be02fedd87cb 100644
> --- a/drivers/spi/spi-dw-mid.c
> +++ b/drivers/spi/spi-dw-mid.c
> @@ -19,7 +19,9 @@
>  
>  #define WAIT_RETRIES	5
>  #define RX_BUSY		0
> +#define RX_BURST_LEVEL	16
>  #define TX_BUSY		1
> +#define TX_BURST_LEVEL	16
>  
>  static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
>  {
> @@ -214,7 +216,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
>  	memset(&txconf, 0, sizeof(txconf));
>  	txconf.direction = DMA_MEM_TO_DEV;
>  	txconf.dst_addr = dws->dma_addr;
> -	txconf.dst_maxburst = 16;
> +	txconf.dst_maxburst = TX_BURST_LEVEL;
>  	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>  	txconf.dst_addr_width = convert_dma_width(dws->n_bytes);
>  	txconf.device_fc = false;
> @@ -288,7 +290,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
>  	memset(&rxconf, 0, sizeof(rxconf));
>  	rxconf.direction = DMA_DEV_TO_MEM;
>  	rxconf.src_addr = dws->dma_addr;
> -	rxconf.src_maxburst = 16;
> +	rxconf.src_maxburst = RX_BURST_LEVEL;
>  	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>  	rxconf.src_addr_width = convert_dma_width(dws->n_bytes);
>  	rxconf.device_fc = false;
> @@ -313,8 +315,8 @@ static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
>  {
>  	u16 imr = 0, dma_ctrl = 0;
>  
> -	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
> -	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
> +	dw_writel(dws, DW_SPI_DMARDLR, RX_BURST_LEVEL - 1);
> +	dw_writel(dws, DW_SPI_DMATDLR, TX_BURST_LEVEL);
>  
>  	if (xfer->tx_buf) {
>  		dma_ctrl |= SPI_DMA_TDMAE;
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 7bba774885cd..be02fedd87cb 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -19,7 +19,9 @@ 
 
 #define WAIT_RETRIES	5
 #define RX_BUSY		0
+#define RX_BURST_LEVEL	16
 #define TX_BUSY		1
+#define TX_BURST_LEVEL	16
 
 static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
 {
@@ -214,7 +216,7 @@  static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
 	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
-	txconf.dst_maxburst = 16;
+	txconf.dst_maxburst = TX_BURST_LEVEL;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	txconf.dst_addr_width = convert_dma_width(dws->n_bytes);
 	txconf.device_fc = false;
@@ -288,7 +290,7 @@  static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 	memset(&rxconf, 0, sizeof(rxconf));
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
-	rxconf.src_maxburst = 16;
+	rxconf.src_maxburst = RX_BURST_LEVEL;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	rxconf.src_addr_width = convert_dma_width(dws->n_bytes);
 	rxconf.device_fc = false;
@@ -313,8 +315,8 @@  static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	u16 imr = 0, dma_ctrl = 0;
 
-	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
-	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
+	dw_writel(dws, DW_SPI_DMARDLR, RX_BURST_LEVEL - 1);
+	dw_writel(dws, DW_SPI_DMATDLR, TX_BURST_LEVEL);
 
 	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;