diff mbox series

[1/5] spi: lpspi: fix the imbalance of runtime pm function call

Message ID 20200714075251.12777-2-xiaoning.wang@nxp.com (mailing list archive)
State Superseded
Commit 2abbae5a0e4e1d81016f56a403b2daadfee314c3
Headers show
Series Some bug fix for lpspi | expand

Commit Message

Clark Wang July 14, 2020, 7:52 a.m. UTC 
Call the put function after probe successfully. Otherwise, the lpspi
module will keep active status until the first spi transfer called.

Disable runtime pm when probe fails. There is no need to active runtime
pm after probe failed.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
 drivers/spi/spi-fsl-lpspi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 1552b28b9515..a1555bbc5e5a 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -954,10 +954,15 @@  static int fsl_lpspi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
 
+	pm_runtime_mark_last_busy(fsl_lpspi->dev);
+	pm_runtime_put_autosuspend(fsl_lpspi->dev);
+
 	return 0;
 
 out_pm_get:
-	pm_runtime_put_noidle(fsl_lpspi->dev);
+	pm_runtime_dont_use_autosuspend(fsl_lpspi->dev);
+	pm_runtime_put_sync(fsl_lpspi->dev);
+	pm_runtime_disable(fsl_lpspi->dev);
 out_controller_put:
 	spi_controller_put(controller);