spi: spi-fsl-dspi: delete EOQ transfer mode

Commit Message

Vladimir Oltean Aug. 23, 2020, 9:26 p.m. UTC

After the only user of the limited EOQ mode has now been converted to
DMA as of commit b09058bbf5f0 ("spi: spi-fsl-dspi: set ColdFire to DMA
mode"), we can finally delete this code.

Signed-off-by: Vladimir Oltean <[e-mail]>
---
 drivers/spi/spi-fsl-dspi.c | 56 ++++----------------------------------
 1 file changed, 5 insertions(+), 51 deletions(-)

Comments

Mark Brown Aug. 24, 2020, 1:32 p.m. UTC | #1

On Mon, 24 Aug 2020 00:26:57 +0300, Vladimir Oltean wrote:
> After the only user of the limited EOQ mode has now been converted to
> DMA as of commit b09058bbf5f0 ("spi: spi-fsl-dspi: set ColdFire to DMA
> mode"), we can finally delete this code.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: spi-fsl-dspi: delete EOQ transfer mode
      commit: 20c05a05506361a6c355e9944d5616f5ed1e01c8

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Patch

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 5b9a285d84a7..c739cc7e4561 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -53,7 +53,6 @@ 
 
 #define SPI_SR				0x2c
 #define SPI_SR_TCFQF			BIT(31)
-#define SPI_SR_EOQF			BIT(28)
 #define SPI_SR_TFUF			BIT(27)
 #define SPI_SR_TFFF			BIT(25)
 #define SPI_SR_CMDTCF			BIT(23)
@@ -62,7 +61,7 @@ 
 #define SPI_SR_TFIWF			BIT(18)
 #define SPI_SR_RFDF			BIT(17)
 #define SPI_SR_CMDFFF			BIT(16)
-#define SPI_SR_CLEAR			(SPI_SR_TCFQF | SPI_SR_EOQF | \
+#define SPI_SR_CLEAR			(SPI_SR_TCFQF | \
 					SPI_SR_TFUF | SPI_SR_TFFF | \
 					SPI_SR_CMDTCF | SPI_SR_SPEF | \
 					SPI_SR_RFOF | SPI_SR_TFIWF | \
@@ -75,7 +74,6 @@ 
 
 #define SPI_RSER			0x30
 #define SPI_RSER_TCFQE			BIT(31)
-#define SPI_RSER_EOQFE			BIT(28)
 #define SPI_RSER_CMDTCFE		BIT(23)
 
 #define SPI_PUSHR			0x34
@@ -114,7 +112,6 @@  struct chip_data {
 };
 
 enum dspi_trans_mode {
-	DSPI_EOQ_MODE = 0,
 	DSPI_XSPI_MODE,
 	DSPI_DMA_MODE,
 };
@@ -671,11 +668,6 @@  static void ns_delay_scale(char *psc, char *sc, int delay_ns,
 	}
 }
 
-static void dspi_pushr_write(struct fsl_dspi *dspi)
-{
-	regmap_write(dspi->regmap, SPI_PUSHR, dspi_pop_tx_pushr(dspi));
-}
-
 static void dspi_pushr_cmd_write(struct fsl_dspi *dspi, u16 cmd)
 {
 	/*
@@ -735,21 +727,6 @@  static void dspi_xspi_fifo_write(struct fsl_dspi *dspi, int num_words)
 	}
 }
 
-static void dspi_eoq_fifo_write(struct fsl_dspi *dspi, int num_words)
-{
-	u16 xfer_cmd = dspi->tx_cmd;
-
-	/* Fill TX FIFO with as many transfers as possible */
-	while (num_words--) {
-		dspi->tx_cmd = xfer_cmd;
-		/* Request EOQF for last transfer in FIFO */
-		if (num_words == 0)
-			dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
-		/* Write combined TX FIFO and CMD FIFO entry */
-		dspi_pushr_write(dspi);
-	}
-}
-
 static u32 dspi_popr_read(struct fsl_dspi *dspi)
 {
 	u32 rxdata = 0;
@@ -818,7 +795,7 @@  static void dspi_setup_accel(struct fsl_dspi *dspi)
 	dspi->oper_word_size = DIV_ROUND_UP(dspi->oper_bits_per_word, 8);
 
 	/*
-	 * Update CTAR here (code is common for EOQ, XSPI and DMA modes).
+	 * Update CTAR here (code is common for XSPI and DMA modes).
 	 * We will update CTARE in the portion specific to XSPI, when we
 	 * also know the preload value (DTCP).
 	 */
@@ -862,10 +839,7 @@  static void dspi_fifo_write(struct fsl_dspi *dspi)
 
 	spi_take_timestamp_pre(dspi->ctlr, xfer, dspi->progress, !dspi->irq);
 
-	if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
-		dspi_eoq_fifo_write(dspi, num_words);
-	else
-		dspi_xspi_fifo_write(dspi, num_words);
+	dspi_xspi_fifo_write(dspi, num_words);
 	/*
 	 * Everything after this point is in a potential race with the next
 	 * interrupt, so we must never use dspi->words_in_flight again since it
@@ -898,7 +872,7 @@  static int dspi_poll(struct fsl_dspi *dspi)
 		regmap_read(dspi->regmap, SPI_SR, &spi_sr);
 		regmap_write(dspi->regmap, SPI_SR, spi_sr);
 
-		if (spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF))
+		if (spi_sr & SPI_SR_CMDTCF)
 			break;
 	} while (--tries);
 
@@ -916,7 +890,7 @@  static irqreturn_t dspi_interrupt(int irq, void *dev_id)
 	regmap_read(dspi->regmap, SPI_SR, &spi_sr);
 	regmap_write(dspi->regmap, SPI_SR, spi_sr);
 
-	if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_CMDTCF)))
+	if (!(spi_sr & SPI_SR_CMDTCF))
 		return IRQ_NONE;
 
 	if (dspi_rxtx(dspi) == 0)
@@ -1204,9 +1178,6 @@  static int dspi_init(struct fsl_dspi *dspi)
 	regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
 
 	switch (dspi->devtype_data->trans_mode) {
-	case DSPI_EOQ_MODE:
-		regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
-		break;
 	case DSPI_XSPI_MODE:
 		regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
 		break;
@@ -1245,22 +1216,6 @@  static int dspi_slave_abort(struct spi_master *master)
 	return 0;
 }
 
-/*
- * EOQ mode will inevitably deassert its PCS signal on last word in a queue
- * (hardware limitation), so we need to inform the spi_device that larger
- * buffers than the FIFO size are going to have the chip select randomly
- * toggling, so it has a chance to adapt its message sizes.
- */
-static size_t dspi_max_message_size(struct spi_device *spi)
-{
-	struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
-
-	if (dspi->devtype_data->trans_mode == DSPI_EOQ_MODE)
-		return dspi->devtype_data->fifo_size;
-
-	return SIZE_MAX;
-}
-
 static int dspi_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1283,7 +1238,6 @@  static int dspi_probe(struct platform_device *pdev)
 
 	ctlr->setup = dspi_setup;
 	ctlr->transfer_one_message = dspi_transfer_one_message;
-	ctlr->max_message_size = dspi_max_message_size;
 	ctlr->dev.of_node = pdev->dev.of_node;
 
 	ctlr->cleanup = dspi_cleanup;