| Message ID | 20201027095724.18654-2-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 029b42d8519cef70c4fb5fcaccd08f1053ed2bf0 |
| Headers | show |
| Series | SPI/ Input: ads7846: properly handle spi->mode flags | expand |
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 99380c0825db..8097f27702f3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -171,6 +171,7 @@ struct spi_device { #define SPI_MODE_1 (0|SPI_CPHA) #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) +#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA) #define SPI_CS_HIGH 0x04 /* chipselect active high? */ #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */
Provide a macro to filter all SPI_MODE_0,1,2,3 mode in one run. The latest SPI framework will parse the devicetree in following call sequence: of_register_spi_device() -> of_spi_parse_dt() So, driver do not need to pars the devicetree and will get prepared flags in the probe. On one hand it is good far most drivers. On other hand some drivers need to filter flags provide by SPI framework and apply know to work flags. This drivers may use SPI_MODE_X_MASK to filter MODE flags and set own, known flags: spi->flags &= ~SPI_MODE_X_MASK; spi->flags |= SPI_MODE_0; Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- include/linux/spi/spi.h | 1 + 1 file changed, 1 insertion(+)