| Message ID | 20201030121116.869105-1-tudor.ambarus@microchip.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 23fc86eb2f30fc975e5705bb1a2cf92956d2edd7 |
| Headers | show |
| Series | spi: atmel: Downgrade to dev_dbg when dma_request_chan() fails | expand |
On Fri, 30 Oct 2020 14:11:16 +0200, Tudor Ambarus wrote: > The IP's DMA capabilities are described in the SoC dtsi, to spare > users duplicating the DMA bindings in their board device tree. Users > that don't want to use DMA, have to overwrite the DMA bindings in > their board device tree. An example is: > commit ddcdaeb88242 ("ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions") > > When the DMA bindings are overwritten, one could see on the console: > atmel_spi fc018400.spi: error -ENODEV: No TX DMA channel, DMA is disabled > atmel_spi fc018400.spi: Atmel SPI Controller using PIO only > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: atmel: Downgrade to dev_dbg when dma_request_chan() fails commit: 23fc86eb2f30fc975e5705bb1a2cf92956d2edd7 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 0e5e64a80848..948396b382d7 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -512,8 +512,8 @@ static int atmel_spi_configure_dma(struct spi_master *master, master->dma_tx = dma_request_chan(dev, "tx"); if (IS_ERR(master->dma_tx)) { - err = dev_err_probe(dev, PTR_ERR(master->dma_tx), - "No TX DMA channel, DMA is disabled\n"); + err = PTR_ERR(master->dma_tx); + dev_dbg(dev, "No TX DMA channel, DMA is disabled\n"); goto error_clear; } @@ -524,7 +524,7 @@ static int atmel_spi_configure_dma(struct spi_master *master, * No reason to check EPROBE_DEFER here since we have already * requested tx channel. */ - dev_err(dev, "No RX DMA channel, DMA is disabled\n"); + dev_dbg(dev, "No RX DMA channel, DMA is disabled\n"); goto error; }
The IP's DMA capabilities are described in the SoC dtsi, to spare users duplicating the DMA bindings in their board device tree. Users that don't want to use DMA, have to overwrite the DMA bindings in their board device tree. An example is: commit ddcdaeb88242 ("ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions") When the DMA bindings are overwritten, one could see on the console: atmel_spi fc018400.spi: error -ENODEV: No TX DMA channel, DMA is disabled atmel_spi fc018400.spi: Atmel SPI Controller using PIO only Choosing to not use DMA is not a reason to print an error message. More, the user is already informed when PIO is used: "Atmel SPI Controller using PIO only". Downgrade to dev_dbg when dma_request_chan() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- drivers/spi/spi-atmel.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)