diff mbox series

[v5,3/3] mtd: spinand: add SPI-NAND MTD resume handler

Message ID 20210602094913.26472-4-patrice.chotard@foss.st.com (mailing list archive)
State New
Headers show
Series mtd: spinand: add SPI-NAND MTD resume handler | expand

Commit Message

Patrice CHOTARD June 2, 2021, 9:49 a.m. UTC
From: Patrice Chotard <patrice.chotard@foss.st.com>

After power up, all SPI NAND's blocks are locked. Only read operations
are allowed, write and erase operations are forbidden.
The SPI NAND framework unlocks all the blocks during its initialization.

During a standby low power, the memory is powered down, losing its
configuration.
During the resume, the QSPI driver state is restored but the SPI NAND
framework does not reconfigured the memory.

This patch adds SPI-NAND MTD PM handlers for resume ops.
SPI NAND resume op re-initializes SPI NAND flash to its probed state.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
Changes in v5: 
  - Remove spinand_read_cfg() from spinand_mtd_resume() as it is now called in 
    spinand_init_flash()

Changes in v4:
  - Call spinand_init_flash() helper in spinand_mtd_resume()

Changes in v3:
  - Add spinand_read_cfg() call to repopulate cache

Changes in v2:
  - Add helper spinand_block_unlock().
  - Add spinand_ecc_enable() call.
  - Remove some dev_err().
  - Fix commit's title and message.

 drivers/mtd/nand/spi/core.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Miquel Raynal June 11, 2021, 7:02 p.m. UTC | #1
On Wed, 2021-06-02 at 09:49:13 UTC,  wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
> 
> After power up, all SPI NAND's blocks are locked. Only read operations
> are allowed, write and erase operations are forbidden.
> The SPI NAND framework unlocks all the blocks during its initialization.
> 
> During a standby low power, the memory is powered down, losing its
> configuration.
> During the resume, the QSPI driver state is restored but the SPI NAND
> framework does not reconfigured the memory.
> 
> This patch adds SPI-NAND MTD PM handlers for resume ops.
> SPI NAND resume op re-initializes SPI NAND flash to its probed state.
> 
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel
diff mbox series

Patch

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 12dfa75eec28..13fd2f74b4f1 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1124,6 +1124,22 @@  static int spinand_init_flash(struct spinand_device *spinand)
 	return ret;
 }
 
+static void spinand_mtd_resume(struct mtd_info *mtd)
+{
+	struct spinand_device *spinand = mtd_to_spinand(mtd);
+	int ret;
+
+	ret = spinand_reset_op(spinand);
+	if (ret)
+		return;
+
+	ret = spinand_init_flash(spinand);
+	if (ret)
+		return;
+
+	spinand_ecc_enable(spinand, false);
+}
+
 static int spinand_init(struct spinand_device *spinand)
 {
 	struct device *dev = &spinand->spimem->spi->dev;
@@ -1194,6 +1210,7 @@  static int spinand_init(struct spinand_device *spinand)
 	mtd->_block_isreserved = spinand_mtd_block_isreserved;
 	mtd->_erase = spinand_mtd_erase;
 	mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
+	mtd->_resume = spinand_mtd_resume;
 
 	if (nand->ecc.engine) {
 		ret = mtd_ooblayout_count_freebytes(mtd);