diff mbox series

[v2] dt-bindings: spi: convert Cadence SPI bindings to YAML

Message ID 20210605003811.858676-1-iwamatsu@nigauri.org (mailing list archive)
State Accepted
Commit aa7968682a2b8a9cecf1d7d07e1c8ae8c08d211e
Headers show
Series [v2] dt-bindings: spi: convert Cadence SPI bindings to YAML | expand

Commit Message

Nobuhiro Iwamatsu June 5, 2021, 12:38 a.m. UTC
Convert spi for Cadence SPI bindings documentation to YAML.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---

 v2: Add ref and enum is-decoded-cs.
     Add ref to num-cs.

 .../devicetree/bindings/spi/spi-cadence.txt   | 30 ---------
 .../devicetree/bindings/spi/spi-cadence.yaml  | 66 +++++++++++++++++++
 2 files changed, 66 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.txt
 create mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.yaml

Comments

Rob Herring June 16, 2021, 11:36 p.m. UTC | #1
On Sat, 05 Jun 2021 09:38:11 +0900, Nobuhiro Iwamatsu wrote:
> Convert spi for Cadence SPI bindings documentation to YAML.
> 
> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> ---
> 
>  v2: Add ref and enum is-decoded-cs.
>      Add ref to num-cs.
> 
>  .../devicetree/bindings/spi/spi-cadence.txt   | 30 ---------
>  .../devicetree/bindings/spi/spi-cadence.yaml  | 66 +++++++++++++++++++
>  2 files changed, 66 insertions(+), 30 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Mark Brown June 17, 2021, 3:01 p.m. UTC | #2
On Sat, 5 Jun 2021 09:38:11 +0900, Nobuhiro Iwamatsu wrote:
> Convert spi for Cadence SPI bindings documentation to YAML.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] dt-bindings: spi: convert Cadence SPI bindings to YAML
      commit: aa7968682a2b8a9cecf1d7d07e1c8ae8c08d211e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
deleted file mode 100644
index 05a2ef945664be..00000000000000
--- a/Documentation/devicetree/bindings/spi/spi-cadence.txt
+++ /dev/null
@@ -1,30 +0,0 @@ 
-Cadence SPI controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6".
-- reg			: Physical base address and size of SPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "ref_clk", "pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-
-Optional properties:
-- num-cs		: Number of chip selects used.
-			  If a decoder is used, this will be the number of
-			  chip selects after the decoder.
-- is-decoded-cs		: Flag to indicate whether decoder is used or not.
-
-Example:
-
-	spi@e0007000 {
-		compatible = "xlnx,zynq-spi-r1p6";
-		clock-names = "ref_clk", "pclk";
-		clocks = <&clkc 26>, <&clkc 35>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 49 4>;
-		num-cs = <4>;
-		is-decoded-cs = <0>;
-		reg = <0xe0007000 0x1000>;
-	} ;
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
new file mode 100644
index 00000000000000..9787be21318e66
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -0,0 +1,66 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-cadence.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SPI controller Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - cdns,spi-r1p6
+      - xlnx,zynq-spi-r1p6
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+  clocks:
+    maxItems: 2
+
+  num-cs:
+    description: |
+      Number of chip selects used. If a decoder is used,
+      this will be the number of chip selects after the
+      decoder.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 4
+
+  is-decoded-cs:
+    description: |
+      Flag to indicate whether decoder is used or not.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e0007000 {
+      compatible = "xlnx,zynq-spi-r1p6";
+      clock-names = "ref_clk", "pclk";
+      clocks = <&clkc 26>, <&clkc 35>;
+      interrupt-parent = <&intc>;
+      interrupts = <0 49 4>;
+      num-cs = <4>;
+      is-decoded-cs = <0>;
+      reg = <0xe0007000 0x1000>;
+    };
+...