diff mbox series

[v2] spi: mediatek: skip delays if they are 0

Message ID 20211001152153.4604-1-dafna.hirschfeld@collabora.com (mailing list archive)
State Accepted
Commit 3672bb820f3292b6f035469f863c020317a3dd28
Headers show
Series [v2] spi: mediatek: skip delays if they are 0 | expand

Commit Message

Dafna Hirschfeld Oct. 1, 2021, 3:21 p.m. UTC 
In the function 'mtk_spi_set_hw_cs_timing'
the 'setup', 'hold' and 'inactive' delays are configured.
In case those values are 0 it causes errors on mt8173:

cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0:
	Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.

This patch fixes that issues by setting only the values
that are not 0.

Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
---
Changes since v1: v1 was a revert of the commits
04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
5c842e51ac63 ("spi: mediatek: fix build warnning in set cs timing")

this version fixes the erros instead of reverting

 drivers/spi/spi-mt65xx.c | 64 ++++++++++++++++++++++------------------
 1 file changed, 36 insertions(+), 28 deletions(-)

Comments

Mark Brown Oct. 2, 2021, 12:16 a.m. UTC | #1 
On Fri, 1 Oct 2021 17:21:53 +0200, Dafna Hirschfeld wrote:
> In the function 'mtk_spi_set_hw_cs_timing'
> the 'setup', 'hold' and 'inactive' delays are configured.
> In case those values are 0 it causes errors on mt8173:
> 
> cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0:
> 	Error transferring EC i2c message -71
> cros-ec-spi spi0.0: EC failed to respond in time.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: mediatek: skip delays if they are 0
      commit: 3672bb820f3292b6f035469f863c020317a3dd28

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 386e8c84be0a..a15de10ee286 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -233,36 +233,44 @@  static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
 		return delay;
 	inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
 
-	setup    = setup ? setup : 1;
-	hold     = hold ? hold : 1;
-	inactive = inactive ? inactive : 1;
-
-	reg_val = readl(mdata->base + SPI_CFG0_REG);
-	if (mdata->dev_comp->enhance_timing) {
-		hold = min_t(u32, hold, 0x10000);
-		setup = min_t(u32, setup, 0x10000);
-		reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
-		reg_val |= (((hold - 1) & 0xffff)
-			   << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
-		reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
-		reg_val |= (((setup - 1) & 0xffff)
-			   << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
-	} else {
-		hold = min_t(u32, hold, 0x100);
-		setup = min_t(u32, setup, 0x100);
-		reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
-		reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
-		reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
-		reg_val |= (((setup - 1) & 0xff)
-			    << SPI_CFG0_CS_SETUP_OFFSET);
+	if (hold || setup) {
+		reg_val = readl(mdata->base + SPI_CFG0_REG);
+		if (mdata->dev_comp->enhance_timing) {
+			if (hold) {
+				hold = min_t(u32, hold, 0x10000);
+				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+				reg_val |= (((hold - 1) & 0xffff)
+					<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x10000);
+				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+				reg_val |= (((setup - 1) & 0xffff)
+					<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+			}
+		} else {
+			if (hold) {
+				hold = min_t(u32, hold, 0x100);
+				reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+				reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x100);
+				reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+				reg_val |= (((setup - 1) & 0xff)
+					<< SPI_CFG0_CS_SETUP_OFFSET);
+			}
+		}
+		writel(reg_val, mdata->base + SPI_CFG0_REG);
 	}
-	writel(reg_val, mdata->base + SPI_CFG0_REG);
 
-	inactive = min_t(u32, inactive, 0x100);
-	reg_val = readl(mdata->base + SPI_CFG1_REG);
-	reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
-	reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
-	writel(reg_val, mdata->base + SPI_CFG1_REG);
+	if (inactive) {
+		inactive = min_t(u32, inactive, 0x100);
+		reg_val = readl(mdata->base + SPI_CFG1_REG);
+		reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+		reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+		writel(reg_val, mdata->base + SPI_CFG1_REG);
+	}
 
 	return 0;
 }