From patchwork Mon Feb 14 09:42:24 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 12745319 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id F2B82C433F5 for ; Mon, 14 Feb 2022 09:53:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1343719AbiBNJxV convert rfc822-to-8bit (ORCPT ); Mon, 14 Feb 2022 04:53:21 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:34406 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1344962AbiBNJwI (ORCPT ); Mon, 14 Feb 2022 04:52:08 -0500 Received: from mx0a-001b2d01.pphosted.com (mx0b-001b2d01.pphosted.com [148.163.158.5]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6439E7B572; Mon, 14 Feb 2022 01:43:31 -0800 (PST) Received: from pps.filterd (m0098420.ppops.net [127.0.0.1]) by mx0b-001b2d01.pphosted.com (8.16.1.2/8.16.1.2) with SMTP id 21E8l7iG002568; Mon, 14 Feb 2022 09:42:48 GMT Received: from ppma06ams.nl.ibm.com (66.31.33a9.ip4.static.sl-reverse.com [169.51.49.102]) by mx0b-001b2d01.pphosted.com with ESMTP id 3e7cjdssqk-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 14 Feb 2022 09:42:47 +0000 Received: from pps.filterd (ppma06ams.nl.ibm.com [127.0.0.1]) by ppma06ams.nl.ibm.com (8.16.1.2/8.16.1.2) with SMTP id 21E9bier021905; Mon, 14 Feb 2022 09:42:45 GMT Received: from b06cxnps3075.portsmouth.uk.ibm.com (d06relay10.portsmouth.uk.ibm.com [9.149.109.195]) by ppma06ams.nl.ibm.com with ESMTP id 3e645jbjsd-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 14 Feb 2022 09:42:45 +0000 Received: from d06av24.portsmouth.uk.ibm.com (d06av24.portsmouth.uk.ibm.com [9.149.105.60]) by b06cxnps3075.portsmouth.uk.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id 21E9gh7A42860800 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Mon, 14 Feb 2022 09:42:43 GMT Received: from d06av24.portsmouth.uk.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 0B3FA42057; Mon, 14 Feb 2022 09:42:43 +0000 (GMT) Received: from d06av24.portsmouth.uk.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 4E9F842047; Mon, 14 Feb 2022 09:42:42 +0000 (GMT) Received: from smtp.tlslab.ibm.com (unknown [9.101.4.1]) by d06av24.portsmouth.uk.ibm.com (Postfix) with SMTP; Mon, 14 Feb 2022 09:42:42 +0000 (GMT) Received: from yukon.ibmuc.com (unknown [9.171.60.190]) by smtp.tlslab.ibm.com (Postfix) with ESMTP id CA3C92201E5; Mon, 14 Feb 2022 10:42:40 +0100 (CET) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= Subject: [PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers Date: Mon, 14 Feb 2022 10:42:24 +0100 Message-Id: <20220214094231.3753686-4-clg@kaod.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220214094231.3753686-1-clg@kaod.org> References: <20220214094231.3753686-1-clg@kaod.org> MIME-Version: 1.0 X-TM-AS-GCONF: 00 X-Proofpoint-GUID: JHr9YeSoKq7D0seRsaYp-ytqAXTTx92b X-Proofpoint-ORIG-GUID: JHr9YeSoKq7D0seRsaYp-ytqAXTTx92b X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.816,Hydra:6.0.425,FMLib:17.11.62.513 definitions=2022-02-14_01,2022-02-14_01,2021-12-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 spamscore=0 suspectscore=0 mlxlogscore=999 mlxscore=0 priorityscore=1501 bulkscore=0 malwarescore=0 lowpriorityscore=0 adultscore=0 impostorscore=0 clxscore=1034 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2201110000 definitions=main-2202140058 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org This SPI driver adds support for the Aspeed static memory controllers of the AST2600, AST2500 and AST2400 SoCs using the spi-mem interface. * AST2600 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . Only supports SPI type flash memory . different segment register interface . single, dual and quad mode. * AST2600 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . different segment register interface . single, dual and quad mode. * AST2500 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . supports SPI type flash memory (CE0-CE1) . CE2 can be of NOR type flash but this is not supported by the driver . single, dual mode. * AST2500 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . single, dual mode. * AST2400 New Static Memory Controller (also referred as FMC) . BMC firmware . New register set . 5 chip select pins (CE0 ∼ CE4) . supports NOR flash, NAND flash and SPI flash memory. . single, dual and quad mode. Each controller has a memory range on which flash devices contents are mapped. Each device is assigned a window that can be changed at bootime with the Segment Address Registers. Each SPI flash device can then be accessed in two modes: Command and User. When in User mode, SPI transfers are initiated with accesses to the memory segment of a device. When in Command mode, memory operations on the memory segment of a device generate SPI commands automatically using a Control Register for the settings. This initial patch adds support for User mode. Command mode needs a little more work to check that the memory window on the AHB bus fits the device size. It will come later when support for direct mapping is added. Single and dual mode RX transfers are supported. Other types than SPI are not supported. Signed-off-by: Chin-Ting Kuo Signed-off-by: Cédric Le Goater Acked-by: Pratyush Yadav --- drivers/spi/spi-aspeed-smc.c | 766 ++++++++++++++++++++++++ drivers/mtd/spi-nor/controllers/Kconfig | 2 +- drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + 4 files changed, 779 insertions(+), 1 deletion(-) create mode 100644 drivers/spi/spi-aspeed-smc.c diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c new file mode 100644 index 000000000000..0aeff6f468af --- /dev/null +++ b/drivers/spi/spi-aspeed-smc.c @@ -0,0 +1,766 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ASPEED FMC/SPI Memory Controller Driver + * + * Copyright (c) 2015-2022, IBM Corporation. + * Copyright (c) 2020, ASPEED Corporation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DEVICE_NAME "spi-aspeed-smc" + +#define ASPEED_SPI_DEFAULT_FREQ 50000000 + +/* Type setting Register */ +#define CONFIG_REG 0x0 +#define CONFIG_TYPE_SPI 0x2 + +/* CE Control Register */ +#define CE_CTRL_REG 0x4 + +/* CEx Control Register */ +#define CE0_CTRL_REG 0x10 +#define CTRL_IO_MODE_MASK GENMASK(30, 28) +#define CTRL_IO_SINGLE_DATA 0x0 +#define CTRL_IO_DUAL_DATA BIT(29) +#define CTRL_IO_QUAD_DATA BIT(30) +#define CTRL_COMMAND_SHIFT 16 +#define CTRL_IO_DUMMY_SET(dummy) \ + (((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6)) +#define CTRL_CE_STOP_ACTIVE BIT(2) +#define CTRL_IO_MODE_CMD_MASK GENMASK(1, 0) +#define CTRL_IO_MODE_NORMAL 0x0 +#define CTRL_IO_MODE_READ 0x1 +#define CTRL_IO_MODE_WRITE 0x2 +#define CTRL_IO_MODE_USER 0x3 + +#define CTRL_IO_CMD_MASK 0xf0ff40c3 + +/* CEx Address Decoding Range Register */ +#define CE0_SEGMENT_ADDR_REG 0x30 + +enum aspeed_spi_ctl_reg_value { + ASPEED_SPI_BASE, + ASPEED_SPI_READ, + ASPEED_SPI_WRITE, + ASPEED_SPI_MAX, +}; + +struct aspeed_spi; + +struct aspeed_spi_chip { + struct aspeed_spi *aspi; + u32 cs; + void __iomem *ctl; + void __iomem *ahb_base; + u32 ahb_window_size; + u32 ctl_val[ASPEED_SPI_MAX]; + u32 clk_freq; +}; + +struct aspeed_spi_data { + u32 ctl0; + u32 max_cs; + bool hastype; + u32 mode_bits; + u32 we0; + + u32 (*segment_start)(struct aspeed_spi *aspi, u32 reg); + u32 (*segment_end)(struct aspeed_spi *aspi, u32 reg); + u32 (*segment_reg)(struct aspeed_spi *aspi, u32 start, u32 end); +}; + +#define ASPEED_SPI_MAX_NUM_CS 5 + +struct aspeed_spi { + const struct aspeed_spi_data *data; + + void __iomem *regs; + void __iomem *ahb_base; + u32 ahb_base_phy; + u32 ahb_window_size; + u32 num_cs; + struct device *dev; + + struct clk *clk; + u32 clk_freq; + + struct aspeed_spi_chip chips[ASPEED_SPI_MAX_NUM_CS]; +}; + +static u32 aspeed_spi_get_io_mode(const struct spi_mem_op *op) +{ + switch (op->data.buswidth) { + case 1: + return CTRL_IO_SINGLE_DATA; + case 2: + return CTRL_IO_DUAL_DATA; + case 4: + return CTRL_IO_QUAD_DATA; + default: + return CTRL_IO_SINGLE_DATA; + } +} + +static void aspeed_spi_set_io_mode(struct aspeed_spi_chip *chip, u32 io_mode) +{ + u32 ctl; + + if (io_mode > 0) { + ctl = readl(chip->ctl) & ~CTRL_IO_MODE_MASK; + ctl |= io_mode; + writel(ctl, chip->ctl); + } +} + +static inline u32 aspeed_spi_chip_write_bit(struct aspeed_spi_chip *chip) +{ + return BIT(chip->aspi->data->we0 + chip->cs); +} + +static void aspeed_spi_chip_enable(struct aspeed_spi_chip *chip, bool enable) +{ + struct aspeed_spi *aspi = chip->aspi; + u32 reg = readl(aspi->regs + CONFIG_REG); + + if (enable) + reg |= aspeed_spi_chip_write_bit(chip); + else + reg &= ~aspeed_spi_chip_write_bit(chip); + writel(reg, aspi->regs + CONFIG_REG); +} + +static void aspeed_spi_start_user(struct aspeed_spi_chip *chip) +{ + u32 ctl = chip->ctl_val[ASPEED_SPI_BASE]; + + ctl |= CTRL_IO_MODE_USER | CTRL_CE_STOP_ACTIVE; + writel(ctl, chip->ctl); + + ctl &= ~CTRL_CE_STOP_ACTIVE; + writel(ctl, chip->ctl); +} + +static void aspeed_spi_stop_user(struct aspeed_spi_chip *chip) +{ + u32 ctl = chip->ctl_val[ASPEED_SPI_READ] | + CTRL_IO_MODE_USER | CTRL_CE_STOP_ACTIVE; + + writel(ctl, chip->ctl); + + /* Restore defaults */ + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); +} + +static int aspeed_spi_read_from_ahb(void *buf, void __iomem *src, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + ioread32_rep(src, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + ioread8_rep(src, (u8 *)buf + offset, len); + return 0; +} + +static int aspeed_spi_write_to_ahb(void __iomem *dst, const void *buf, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + iowrite32_rep(dst, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + iowrite8_rep(dst, (const u8 *)buf + offset, len); + return 0; +} + +static void aspeed_spi_send_cmd_addr(struct aspeed_spi_chip *chip, u8 addr_nbytes, + u64 offset, u32 opcode) +{ + struct aspeed_spi *aspi = chip->aspi; + __be32 temp; + u32 cmdaddr; + + switch (addr_nbytes) { + default: + dev_warn_once(aspi->dev, "Unexpected address width %u, defaulting to 3", + addr_nbytes); + fallthrough; + case 3: + cmdaddr = offset & 0xFFFFFF; + cmdaddr |= opcode << 24; + + temp = cpu_to_be32(cmdaddr); + aspeed_spi_write_to_ahb(chip->ahb_base, &temp, 4); + break; + case 4: + temp = cpu_to_be32(offset); + aspeed_spi_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_spi_write_to_ahb(chip->ahb_base, &temp, 4); + break; + } +} + +static int aspeed_spi_read_reg(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_write_to_ahb(chip->ahb_base, &op->cmd.opcode, 1); + aspeed_spi_read_from_ahb(op->data.buf.in, + chip->ahb_base, op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +static int aspeed_spi_write_reg(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_write_to_ahb(chip->ahb_base, &op->cmd.opcode, 1); + aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, + op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +static ssize_t aspeed_spi_read_user(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op, + u64 offset, size_t len, void *buf) +{ + int io_mode = aspeed_spi_get_io_mode(op); + u8 dummy = 0xFF; + int i; + + aspeed_spi_start_user(chip); + aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, offset, op->cmd.opcode); + if (op->dummy.buswidth && op->dummy.nbytes) { + for (i = 0; i < op->dummy.nbytes / op->dummy.buswidth; i++) + aspeed_spi_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); + } + + aspeed_spi_set_io_mode(chip, io_mode); + + aspeed_spi_read_from_ahb(buf, chip->ahb_base, len); + aspeed_spi_stop_user(chip); + return 0; +} + +static ssize_t aspeed_spi_write_user(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, op->addr.val, op->cmd.opcode); + aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +/* support for 1-1-1, 1-1-2 or 1-1-4 */ +static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + if (op->cmd.buswidth > 1) + return false; + + if (op->addr.nbytes != 0) { + if (op->addr.buswidth > 1 || op->addr.nbytes > 4) + return false; + } + + if (op->dummy.nbytes != 0) { + if (op->dummy.buswidth > 1 || op->dummy.nbytes > 7) + return false; + } + + if (op->data.nbytes != 0 && op->data.buswidth > 4) + return false; + + if (!spi_mem_default_supports_op(mem, op)) + return false; + + return true; +} + +static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[mem->spi->chip_select]; + u32 addr_mode, addr_mode_backup; + u32 ctl_val; + int ret = 0; + + dev_dbg(aspi->dev, + "CE%d %s OP %#x mode:%d.%d.%d.%d naddr:%#x ndummies:%#x len:%#x", + chip->cs, op->data.dir == SPI_MEM_DATA_IN ? "read" : "write", + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth, + op->addr.nbytes, op->dummy.nbytes, op->data.nbytes); + + addr_mode = readl(aspi->regs + CE_CTRL_REG); + addr_mode_backup = addr_mode; + + ctl_val = chip->ctl_val[ASPEED_SPI_BASE]; + ctl_val &= ~CTRL_IO_CMD_MASK; + + ctl_val |= op->cmd.opcode << CTRL_COMMAND_SHIFT; + + /* 4BYTE address mode */ + if (op->addr.nbytes) { + if (op->addr.nbytes == 4) + addr_mode |= (0x11 << chip->cs); + else + addr_mode &= ~(0x11 << chip->cs); + } + + if (op->dummy.buswidth && op->dummy.nbytes) + ctl_val |= CTRL_IO_DUMMY_SET(op->dummy.nbytes / op->dummy.buswidth); + + if (op->data.nbytes != 0) { + if (op->data.buswidth) + ctl_val |= aspeed_spi_get_io_mode(op); + } + + if (op->data.dir == SPI_MEM_DATA_OUT) + ctl_val |= CTRL_IO_MODE_WRITE; + else + ctl_val |= CTRL_IO_MODE_READ; + + if (addr_mode != addr_mode_backup) + writel(addr_mode, aspi->regs + CE_CTRL_REG); + writel(ctl_val, chip->ctl); + + if (op->data.dir == SPI_MEM_DATA_IN) { + if (!op->addr.nbytes) + ret = aspeed_spi_read_reg(chip, op); + else + ret = aspeed_spi_read_user(chip, op, op->addr.val, + op->data.nbytes, op->data.buf.in); + } else { + if (!op->addr.nbytes) + ret = aspeed_spi_write_reg(chip, op); + else + ret = aspeed_spi_write_user(chip, op); + } + + /* Restore defaults */ + if (addr_mode != addr_mode_backup) + writel(addr_mode_backup, aspi->regs + CE_CTRL_REG); + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + return ret; +} + +static int aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + int ret; + + ret = do_aspeed_spi_exec_op(mem, op); + if (ret) + dev_err(&mem->spi->dev, "operation failed: %d\n", ret); + return ret; +} + +static const char *aspeed_spi_get_name(struct spi_mem *mem) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); + struct device *dev = aspi->dev; + + return devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev), mem->spi->chip_select); +} + +struct aspeed_spi_window { + u32 cs; + u32 offset; + u32 size; +}; + +static void aspeed_spi_get_windows(struct aspeed_spi *aspi, + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS]) +{ + const struct aspeed_spi_data *data = aspi->data; + u32 reg_val; + u32 cs; + + for (cs = 0; cs < aspi->data->max_cs; cs++) { + reg_val = readl(aspi->regs + CE0_SEGMENT_ADDR_REG + cs * 4); + windows[cs].cs = cs; + windows[cs].size = data->segment_end(aspi, reg_val) - + data->segment_start(aspi, reg_val); + windows[cs].offset = cs ? windows[cs - 1].offset + windows[cs - 1].size : 0; + dev_vdbg(aspi->dev, "CE%d offset=0x%.8x size=0x%x\n", cs, + windows[cs].offset, windows[cs].size); + } +} + +/* + * On the AST2600, some CE windows are closed by default at reset but + * U-Boot should open all. + */ +static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) +{ + struct aspeed_spi *aspi = chip->aspi; + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; + struct aspeed_spi_window *win = &windows[chip->cs]; + + aspeed_spi_get_windows(aspi, windows); + + chip->ahb_base = aspi->ahb_base + win->offset; + chip->ahb_window_size = win->size; + + dev_dbg(aspi->dev, "CE%d default window [ 0x%.8x - 0x%.8x ] %dMB", + chip->cs, aspi->ahb_base_phy + win->offset, + aspi->ahb_base_phy + win->offset + win->size - 1, + win->size >> 20); + + return chip->ahb_window_size ? 0 : -1; +} + +static const struct spi_controller_mem_ops aspeed_spi_mem_ops = { + .supports_op = aspeed_spi_supports_op, + .exec_op = aspeed_spi_exec_op, + .get_name = aspeed_spi_get_name, +}; + +static void aspeed_spi_chip_set_type(struct aspeed_spi_chip *chip, int type) +{ + struct aspeed_spi *aspi = chip->aspi; + u32 reg; + + reg = readl(aspi->regs + CONFIG_REG); + reg &= ~(3 << (chip->cs * 2)); + reg |= type << (chip->cs * 2); + writel(reg, aspi->regs + CONFIG_REG); +} + +static int aspeed_spi_chip_init(struct aspeed_spi_chip *chip) +{ + struct aspeed_spi *aspi = chip->aspi; + const struct aspeed_spi_data *data = aspi->data; + + chip->ctl = aspi->regs + data->ctl0 + chip->cs * 4; + + aspeed_spi_chip_enable(chip, true); + + /* The driver only supports SPI type flash */ + if (data->hastype) + aspeed_spi_chip_set_type(chip, CONFIG_TYPE_SPI); + + if (aspeed_spi_chip_set_default_window(chip) < 0) { + dev_warn(aspi->dev, "CE%d window invalid", chip->cs); + return -EINVAL; + } + + chip->ctl_val[ASPEED_SPI_BASE] = CTRL_CE_STOP_ACTIVE | CTRL_IO_MODE_USER; + return 0; +} + +static int aspeed_spi_init_devices(struct platform_device *pdev, struct aspeed_spi *aspi) +{ + struct device_node *np; + unsigned int cs; + int ret; + + for_each_available_child_of_node(aspi->dev->of_node, np) { + struct aspeed_spi_chip *chip; + + if (!of_device_is_compatible(np, "jedec,spi-nor")) + continue; + + ret = of_property_read_u32(np, "reg", &cs); + if (ret) { + dev_err(aspi->dev, "Couldn't not read chip select.\n"); + of_node_put(np); + return ret; + } + + if (cs > aspi->data->max_cs) { + dev_err(aspi->dev, "Chip select %d out of range.\n", cs); + of_node_put(np); + return -ERANGE; + } + + chip = &aspi->chips[cs]; + chip->aspi = aspi; + chip->cs = cs; + + ret = aspeed_spi_chip_init(chip); + if (ret) { + of_node_put(np); + return ret; + } + + if (of_property_read_u32(np, "spi-max-frequency", &chip->clk_freq)) + chip->clk_freq = ASPEED_SPI_DEFAULT_FREQ; + + aspi->num_cs++; + } + + return 0; +} + +static void aspeed_spi_enable(struct aspeed_spi *aspi, bool enable) +{ + int cs; + + for (cs = 0; cs < aspi->num_cs; cs++) + aspeed_spi_chip_enable(&aspi->chips[cs], enable); +} + +static int aspeed_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct aspeed_spi_data *data; + struct spi_controller *ctlr; + struct aspeed_spi *aspi; + struct resource *res; + int ret; + + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -ENODEV; + + ctlr = spi_alloc_master(dev, sizeof(*aspi)); + if (!ctlr) + return -ENOMEM; + + aspi = spi_controller_get_devdata(ctlr); + platform_set_drvdata(pdev, aspi); + aspi->data = data; + aspi->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + aspi->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(aspi->regs)) { + ret = PTR_ERR(aspi->regs); + goto put_controller; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + aspi->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(aspi->ahb_base)) { + ret = PTR_ERR(aspi->ahb_base); + goto put_controller; + } + + aspi->ahb_window_size = resource_size(res); + aspi->ahb_base_phy = res->start; + + aspi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(aspi->clk)) { + ret = PTR_ERR(aspi->clk); + goto put_controller; + } + + aspi->clk_freq = clk_get_rate(aspi->clk); + if (!aspi->clk_freq) { + ret = -EINVAL; + goto put_controller; + } + + ret = clk_prepare_enable(aspi->clk); + if (ret) { + dev_err(dev, "can not enable the clock\n"); + goto put_controller; + } + + ret = aspeed_spi_init_devices(pdev, aspi); + if (ret) + goto disable_clk; + + if (!aspi->num_cs) { + dev_err(&pdev->dev, "no devices ?!\n"); + ret = -ENODEV; + goto disable_clk; + } + + /* IRQ is for DMA, which the driver doesn't support yet */ + + ctlr->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL | aspi->data->mode_bits; + ctlr->bus_num = pdev->id; + ctlr->mem_ops = &aspeed_spi_mem_ops; + ctlr->num_chipselect = aspi->num_cs; + ctlr->dev.of_node = dev->of_node; + + ret = devm_spi_register_controller(dev, ctlr); + if (ret) { + dev_err(&pdev->dev, "spi_register_controller failed\n"); + goto disable_aspi; + } + + dev_dbg(&pdev->dev, "probed %d devices\n", aspi->num_cs); + return 0; + +disable_aspi: + aspeed_spi_enable(aspi, false); +disable_clk: + clk_disable_unprepare(aspi->clk); +put_controller: + spi_controller_put(ctlr); + + return ret; +} + +static int aspeed_spi_remove(struct platform_device *pdev) +{ + struct spi_controller *ctlr = platform_get_drvdata(pdev); + struct aspeed_spi *aspi = spi_controller_get_devdata(ctlr); + + aspeed_spi_enable(aspi, false); + spi_unregister_controller(ctlr); + clk_disable_unprepare(aspi->clk); + return 0; +} + +/* + * AHB mappings + */ + +/* + * The Segment Registers of the AST2400 and AST2500 use a 8MB unit. + * The address range is encoded with absolute addresses in the overall + * mapping window. + */ +static u32 aspeed_spi_segment_start(struct aspeed_spi *aspi, u32 reg) +{ + return ((reg >> 16) & 0xFF) << 23; +} + +static u32 aspeed_spi_segment_end(struct aspeed_spi *aspi, u32 reg) +{ + return ((reg >> 24) & 0xFF) << 23; +} + +static u32 aspeed_spi_segment_reg(struct aspeed_spi *aspi, u32 start, u32 end) +{ + return (((start >> 23) & 0xFF) << 16) | (((end >> 23) & 0xFF) << 24); +} + +/* + * The Segment Registers of the AST2600 use a 1MB unit. The address + * range is encoded with offsets in the overall mapping window. + */ + +#define AST2600_SEG_ADDR_MASK 0x0ff00000 + +static u32 aspeed_spi_segment_ast2600_start(struct aspeed_spi *aspi, + u32 reg) +{ + u32 start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; + + return aspi->ahb_base_phy + start_offset; +} + +static u32 aspeed_spi_segment_ast2600_end(struct aspeed_spi *aspi, + u32 reg) +{ + u32 end_offset = reg & AST2600_SEG_ADDR_MASK; + + /* segment is disabled */ + if (!end_offset) + return aspi->ahb_base_phy; + + return aspi->ahb_base_phy + end_offset + 0x100000; +} + +static u32 aspeed_spi_segment_ast2600_reg(struct aspeed_spi *aspi, + u32 start, u32 end) +{ + /* disable zero size segments */ + if (start == end) + return 0; + + return ((start & AST2600_SEG_ADDR_MASK) >> 16) | + ((end - 1) & AST2600_SEG_ADDR_MASK); +} + +/* + * Platform definitions + */ +static const struct aspeed_spi_data ast2400_fmc_data = { + .max_cs = 5, + .hastype = true, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2500_fmc_data = { + .max_cs = 3, + .hastype = true, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2500_spi_data = { + .max_cs = 2, + .hastype = false, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2600_fmc_data = { + .max_cs = 3, + .hastype = false, + .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_ast2600_start, + .segment_end = aspeed_spi_segment_ast2600_end, + .segment_reg = aspeed_spi_segment_ast2600_reg, +}; + +static const struct aspeed_spi_data ast2600_spi_data = { + .max_cs = 2, + .hastype = false, + .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_ast2600_start, + .segment_end = aspeed_spi_segment_ast2600_end, + .segment_reg = aspeed_spi_segment_ast2600_reg, +}; + +static const struct of_device_id aspeed_spi_matches[] = { + { .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data }, + { .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data }, + { .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data }, + { .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data }, + { .compatible = "aspeed,ast2600-spi", .data = &ast2600_spi_data }, + { } +}; +MODULE_DEVICE_TABLE(of, aspeed_spi_matches); + +static struct platform_driver aspeed_spi_driver = { + .probe = aspeed_spi_probe, + .remove = aspeed_spi_remove, + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_spi_matches, + } +}; + +module_platform_driver(aspeed_spi_driver); + +MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); +MODULE_AUTHOR("Chin-Ting Kuo "); +MODULE_AUTHOR("Cedric Le Goater "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig index 876a47042fec..35f18c01b1d8 100644 --- a/drivers/mtd/spi-nor/controllers/Kconfig +++ b/drivers/mtd/spi-nor/controllers/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config SPI_ASPEED_SMC_MTD_SPI_NOR tristate "Aspeed flash controllers in SPI mode" - depends on ARCH_ASPEED || COMPILE_TEST + depends on (ARCH_ASPEED && !SPI_ASPEED_SMC) || COMPILE_TEST depends on HAS_IOMEM && OF help This enables support for the Firmware Memory controller (FMC) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 83e352b0c8f9..dc44493439fb 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -101,6 +101,17 @@ config SPI_ARMADA_3700 This enables support for the SPI controller present on the Marvell Armada 3700 SoCs. +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on (ARCH_ASPEED && !CONFIG_SPI_ASPEED_SMC_MTD_SPI_NOR) || COMPILE_TEST + depends on OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2600, AST2500 and AST2400 SoCs when attached + to SPI NOR chips, and support for the SPI flash memory + controller (SPI) for the host firmware. The implementation + only supports SPI NOR. + config SPI_ATMEL tristate "Atmel SPI Controller" depends on ARCH_AT91 || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 699db95c8441..3dd0e649be94 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_ALTERA_CORE) += spi-altera-core.o obj-$(CONFIG_SPI_ALTERA_DFL) += spi-altera-dfl.o obj-$(CONFIG_SPI_AR934X) += spi-ar934x.o obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o +obj-$(CONFIG_SPI_ASPEED_SMC) += spi-aspeed-smc.o obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_AT91_USART) += spi-at91-usart.o